A computational fluid dynamics （CFD） model is carried out to describe the wire-plate electrostatic precipitator （ESP） in high temperature conditions, aiming to study the effects of high temperature on the electro-...A computational fluid dynamics （CFD） model is carried out to describe the wire-plate electrostatic precipitator （ESP） in high temperature conditions, aiming to study the effects of high temperature on the electro- hydrodynamic （EHD） characteristics. In the model, the complex interactions at high temperatures between the electric field, fluid dynamics and the particulate flow are taken into account. We apply different numerical methods for different fields, including an electric field model, Euler-Lagrange particle-laden flows model, and particle charging model. The effects of high temperature on ionic wind, EHD characteristics and collection effi- ciency are investigated. The numerical results show high temperature causes more significant effects of the ionic wind on the gas secondary flow. High viscosity of gas at high temperature makes particles follow the gas flow pattern more closely. High temperature reduces the surface electric strength, so that the mean electric strength weakens the space charging. On the contrary, there is an increase in the diffusion charging at high tem- perature compared with at low temperature. High temperature increases the ratio of mean drag force over mean electrostatic force actin~ on the ~atticles which mav contribute to a decline of collection efficiencv.展开更多
This paper measured permeability of three-dimension braided preform by radial technology. The results show that principal permeability tensor coincided with their braiding axial direction. The software of one dimensio...This paper measured permeability of three-dimension braided preform by radial technology. The results show that principal permeability tensor coincided with their braiding axial direction. The software of one dimensional flow filling mold was designed using Visual C++ language. Filling time is predicted and validated. The result showed that the filling time of the mold centerline agrees with the prediction value. The filling time of the mould edge is shorter than that of the prediction. An actual plate of 3D braided preform/ modified polyarylacetylene composite is produced according to prediction value and validation analysis.展开更多
Two types of equilibrium and non-equilibrium stage models are generally used to simulate the mass transfer of packed distillation column. Using non-equilibrium model requires the calculation of mass transfer coefficie...Two types of equilibrium and non-equilibrium stage models are generally used to simulate the mass transfer of packed distillation column. Using non-equilibrium model requires the calculation of mass transfer coefficients, thus, usually equilibrium-based methods are preferred to be used for simulations of distillation columns. In this paper, packed column distillation of production of Mono Ethylene Glycol in FARSA SHIMI Company （Assaluyeh-Iran）＇s Ethylene Glycol portion has been simulated through using the equilibrium model and solving the related equations. The simulation has been carried out in the MATLAB environment. The column also has been simulated in the Aspen Hysys and Aspen Plus ver. 2006.5 environments. Then, the output has been compared with software results, designing and operating data of the underlying columns which demonstrate good consistency with the model. Having the model validated, the effect of some operating parameters has been analyzed through the model.展开更多
In this paper, a diffusive three species predator prey model with two Leslie--Cower terms is considered. The stability of the unique positive constant equilibrium for the reaction- diffusion system is obtained. Suffic...In this paper, a diffusive three species predator prey model with two Leslie--Cower terms is considered. The stability of the unique positive constant equilibrium for the reaction- diffusion system is obtained. Sufficient conditions are derived for the global stability of the positive constant equilibrium. In particular, we establish the existence and nonexistence of non-constant positive steady states of this system. The results indicate that the large diffusivity is helpful for the appearance of the non-constant positive steady states （stationary patterns）.展开更多
基金Supported by the National Natural Science Foundation of China(51176170,51390490,51125025)the Natural Science Foundation of Zhejiang Province(LR12E06001)partially supported by the Fundamental Research Funds for the Central Universities
文摘A computational fluid dynamics （CFD） model is carried out to describe the wire-plate electrostatic precipitator （ESP） in high temperature conditions, aiming to study the effects of high temperature on the electro- hydrodynamic （EHD） characteristics. In the model, the complex interactions at high temperatures between the electric field, fluid dynamics and the particulate flow are taken into account. We apply different numerical methods for different fields, including an electric field model, Euler-Lagrange particle-laden flows model, and particle charging model. The effects of high temperature on ionic wind, EHD characteristics and collection effi- ciency are investigated. The numerical results show high temperature causes more significant effects of the ionic wind on the gas secondary flow. High viscosity of gas at high temperature makes particles follow the gas flow pattern more closely. High temperature reduces the surface electric strength, so that the mean electric strength weakens the space charging. On the contrary, there is an increase in the diffusion charging at high tem- perature compared with at low temperature. High temperature increases the ratio of mean drag force over mean electrostatic force actin~ on the ~atticles which mav contribute to a decline of collection efficiencv.
文摘This paper measured permeability of three-dimension braided preform by radial technology. The results show that principal permeability tensor coincided with their braiding axial direction. The software of one dimensional flow filling mold was designed using Visual C++ language. Filling time is predicted and validated. The result showed that the filling time of the mold centerline agrees with the prediction value. The filling time of the mould edge is shorter than that of the prediction. An actual plate of 3D braided preform/ modified polyarylacetylene composite is produced according to prediction value and validation analysis.
文摘Two types of equilibrium and non-equilibrium stage models are generally used to simulate the mass transfer of packed distillation column. Using non-equilibrium model requires the calculation of mass transfer coefficients, thus, usually equilibrium-based methods are preferred to be used for simulations of distillation columns. In this paper, packed column distillation of production of Mono Ethylene Glycol in FARSA SHIMI Company （Assaluyeh-Iran）＇s Ethylene Glycol portion has been simulated through using the equilibrium model and solving the related equations. The simulation has been carried out in the MATLAB environment. The column also has been simulated in the Aspen Hysys and Aspen Plus ver. 2006.5 environments. Then, the output has been compared with software results, designing and operating data of the underlying columns which demonstrate good consistency with the model. Having the model validated, the effect of some operating parameters has been analyzed through the model.
文摘In this paper, a diffusive three species predator prey model with two Leslie--Cower terms is considered. The stability of the unique positive constant equilibrium for the reaction- diffusion system is obtained. Sufficient conditions are derived for the global stability of the positive constant equilibrium. In particular, we establish the existence and nonexistence of non-constant positive steady states of this system. The results indicate that the large diffusivity is helpful for the appearance of the non-constant positive steady states （stationary patterns）.
