The effect on intensity correlation time T by input signal is studied for gain-noise model of a single-mode laser driven by colored pump noise and colored quantum noise with colored cross-correlation with a bias signa...The effect on intensity correlation time T by input signal is studied for gain-noise model of a single-mode laser driven by colored pump noise and colored quantum noise with colored cross-correlation with a bias signal modulation in this paper. By using the linear approximation method, we detect that there exists maximum (i.e., resonance) in the curve of the intensity correlation time T upon bias current io when the noise correlation coefficient λ is positive; and there exists minimum (i.e., suppression) in the T-io curve when λ is negative. And whenλ is zero, T increases monotonously with increasing io. Furthermore, the curve of T upon the signal frequency Ω is also studied. Our study shows that no matter what the value of λ is, there exists minimum (i.e., suppression) in the T-Ω curve.展开更多
A novel nano-scale alignment technique based on Moiré signal for room-temperature imprint lithography in the submicron realm is proposed. The Moiré signals generated by a pair of quadruple gratings on two te...A novel nano-scale alignment technique based on Moiré signal for room-temperature imprint lithography in the submicron realm is proposed. The Moiré signals generated by a pair of quadruple gratings on two templates respectively are optically projected onto a photodetector array, then the detected Moiré signals are used to estimate the alignment errors in x and y directions. The experiment result indicates that complex differential Moiré signal is sensitive to relative displacement of the pair of marks than each single Moiré signal, and the alignment resolutions obtained in x and y directions are ±20nm(3σ) and ±24nm(3σ). They can meet the requirement of alignment accuracy for submicron imprint lithography.展开更多
As fibre optic distributed scattering sensing systems are providing innovative solutions for the monitoring of large structures,Brillouin-based distributed scattering sensing techniques represent a new physical approa...As fibre optic distributed scattering sensing systems are providing innovative solutions for the monitoring of large structures,Brillouin-based distributed scattering sensing techniques represent a new physical approach for structures health monitoring,which seems extremely promising and is receiving most attentions.This paper comprehensively presents some methods of signal interrogation for fibre optic Brillouin-based distributed scattering sensing technology,especially establishes an accurate Pseudo-Voigt model of Brillouin gain spectrum and gives some results on spectrum analysis and data processing.展开更多
The frequency of digitally controlled iodine stabilized He-Ne laser locked to a hyperfine component in ^127I2 was measured using the National Metrology Institute of Japan's reference iodine stabilized He-Ne laser. Th...The frequency of digitally controlled iodine stabilized He-Ne laser locked to a hyperfine component in ^127I2 was measured using the National Metrology Institute of Japan's reference iodine stabilized He-Ne laser. This laser is operated under the conditions of the practical implementation and its frequency with respect to the International Committee for Weights and Measure recommended value is known from international comparisons. Adopting a sampling rate of 120 kHz for the control system of an iodine stabilized He-Ne laser enables frequency deviation of the test laser from the reference laser by + 5 kHz (relative accuracy of 1 ×10^11) thus limited only by the reproducibility of the iodine stabilized He-Ne laser itself.展开更多
文摘The effect on intensity correlation time T by input signal is studied for gain-noise model of a single-mode laser driven by colored pump noise and colored quantum noise with colored cross-correlation with a bias signal modulation in this paper. By using the linear approximation method, we detect that there exists maximum (i.e., resonance) in the curve of the intensity correlation time T upon bias current io when the noise correlation coefficient λ is positive; and there exists minimum (i.e., suppression) in the T-io curve when λ is negative. And whenλ is zero, T increases monotonously with increasing io. Furthermore, the curve of T upon the signal frequency Ω is also studied. Our study shows that no matter what the value of λ is, there exists minimum (i.e., suppression) in the T-Ω curve.
文摘A novel nano-scale alignment technique based on Moiré signal for room-temperature imprint lithography in the submicron realm is proposed. The Moiré signals generated by a pair of quadruple gratings on two templates respectively are optically projected onto a photodetector array, then the detected Moiré signals are used to estimate the alignment errors in x and y directions. The experiment result indicates that complex differential Moiré signal is sensitive to relative displacement of the pair of marks than each single Moiré signal, and the alignment resolutions obtained in x and y directions are ±20nm(3σ) and ±24nm(3σ). They can meet the requirement of alignment accuracy for submicron imprint lithography.
基金National High Technology Research and Development Plans(the"863"projects) of China(2008AA04Z406)
文摘As fibre optic distributed scattering sensing systems are providing innovative solutions for the monitoring of large structures,Brillouin-based distributed scattering sensing techniques represent a new physical approach for structures health monitoring,which seems extremely promising and is receiving most attentions.This paper comprehensively presents some methods of signal interrogation for fibre optic Brillouin-based distributed scattering sensing technology,especially establishes an accurate Pseudo-Voigt model of Brillouin gain spectrum and gives some results on spectrum analysis and data processing.
文摘The frequency of digitally controlled iodine stabilized He-Ne laser locked to a hyperfine component in ^127I2 was measured using the National Metrology Institute of Japan's reference iodine stabilized He-Ne laser. This laser is operated under the conditions of the practical implementation and its frequency with respect to the International Committee for Weights and Measure recommended value is known from international comparisons. Adopting a sampling rate of 120 kHz for the control system of an iodine stabilized He-Ne laser enables frequency deviation of the test laser from the reference laser by + 5 kHz (relative accuracy of 1 ×10^11) thus limited only by the reproducibility of the iodine stabilized He-Ne laser itself.