谈各彩色图样的形成

在物理光学的学习中,涉及到由白光作入射光,得到彩色图样的三种情况。分别为:(ⅰ)由棱镜色散形成;(ⅱ)由双缝干涉形成;(ⅲ)由单缝衍射形成。不少同学在学习过程中把它们混为一谈。现从各成因加以简要说明。

A Compact Low Energy Electron Microscope for Surface Analysis

The description and function characterization of a flange-on type low energy electron mi- croscope are given. In this microscope a magnetic beam separator with 10° deflection angle is used in order to facilitate compacting the instrument on a single 10 in. flange. Mean- while some correcting elements in the electron optical system are simplified to reduce the complexities of construction and operation. The sample is set close to ground potential, so that all the electrostatic lenses are easily to float at high voltages. The performance of the microscope in typical low energy electron microscopy, low energy electron diffraction and photoemission electron microscopy modes is demonstrated through several experiments. A lateral resolution of 51 nm is estimated for low energy electron microscopy imaging. With femtosecond laser as light source, the consequent nonlinear photoemission makes this micro-scope also suitable for the observation of optical near field phenomena and a lateral resolution of 110 nm is obtained.

Some Suggestions Improving Apollo Lunar Laser Retroreflector Arrays

According to our engineering research on satellite-borne laser retroreflector array, some suggestions are proposed on how to manufacture a new Apollo LLRA that can make us measure one illuminating point and unilluminating area on the moon's surface. These suggestions are: to control the dihedral angle offset within ± 0.1″; to use the larger aperture of the transparent face of cube corner prisms; to investigate how to separate out Apollo's reflected laser from mixed beam hitting on the LLR system.

Measurement Error of Refractive Index for Spectacle Lens

As an important optical constant of optical properties for spectacle lens,the refractive index measurement is studied using V prism refractometer. In the experiment,according to various factors inducing measurement error,the experimental results are analyzed,which include right angle deviation,contact liquid,curvature,and focusing accuracy. The study results show that focusing accuracy is the most important factor of influence for measurement,consists of contact liquid wettability,sample shape,and effective width of light transmission. In addition,the refractive index measurement is less affected by angle deviation of sample and the refractive index deviation of contact liquid. On the basis of the experimental data analysis,it is possible to relax the deviation of right angle of the sample to 1' or 2'.

Orientation Angle of Molecules at Hexadecane-Water Interface Studied with Total Internal Reflection Second Harmonic Generation

The orientation angle is an important parameter that reflects the structure of molecules at interfaces. In order to obtain this parameter, second order nonlinear spectroscopic techniques including second harmonic generation （SHG） and sum frequency generation-vibrational spec- troscopy （SFG-VS） have been successfully applied through analysis of the nonlinear signal from various polarizations. In some SHG and SFG-VS experiments, total internal reflection （TIR） configuration has been adopted to get enhanced signals. However, the reports on the detailed procedure of the polarization analysis and the calculation of the orientation angle of interracial molecules under TIR configuration are still very few. In this paper, we mea- sured the orientation angles of two molecules at the hexadecane-water interface under TIR and Non-TIR experimental configurations. The results measured from polarization analysis in TIR configuration consist with those obtained from Non-TIR configuration. This work demonstrates the feasibility and accuracy of polarization analysis in the determination of the orientation angle of molecules at the interfaces under TIR-SHG configuration.

Design of large acceptance angle polarizing beam splitter for laser-based displays

The performance of broadband polarizing beam splitters(PBSs) is sensitive to the incident angle.By taking account of the spectrum of the laser source and using the needle optimization method,a large acceptance angle PBS for laser-based displays is designed.The average degrees of polarization in transmission and reflection can reach 0.989 and 0.980 for an acceptance angle of 13.6?in air using two materials,while better results of 0.993 and 0.989 for an acceptance angle of 14.8?in air are attained when three common materials are used.Both designs consist of 40 layers.

Stability analysis of quasicrystal torsion micromirror actuator based.on the strain gradient theory

Electrostatic torsional micromirrors are widely applied in the fields·of micro-optical switches,optical attenuators,optical scanners,and optical displays.In previous lectures,most of the micromirrors were twisted along the urtiaxial or biaxial direction,which limited the range of light reflection.In this·paper,a quasicrystal torsional micromirror that can be deflected in any direction is designed and the dynamic model of the electrostatically driven micromirror is established.The static and dynamic phenomena and pull-in characteristics are analyzed through the numerical solution of the strain gradient theory.The results of three kinds of mirror deflection directions are compared and analyzed.The results show the significant differences in the torsion models with different deflection axis directions.When the deflection angle along the oblique axis reaches 45°,the instability voltage is the smallest.The pull-in instability voltage increases with the increment ofphonon-phason coupling elastic modulus and phason elastic modulus.The perrriittivity of quasicrystal,the strain gradient parameter,and the air damping influence the torsion of the micromirror dynaniic system.A larger pull-in instability voltage generates with the decrease of surface distributed forces.

A novel polarization splitter based on octagonal dualcore photonic crystal fiber

A novel polarization splitter based on octagonal dual-core photonic crystal fiber(O-D-PCF) is proposed. The impacts of several fiber parameters on the coupling characteristics of the polarization splitter are investigated by full-vectorial finite element method(FV-FEM) in detail. Through optimizing the fiber configuration, a 4.267-mm-long polarization splitter with a bandwidth of 37 nm is achieved, and its extinction ratio(ER) is as high as 81.2 d B at the wavelength of 1.55 μm. Compared with the hexagonal dual-core photonic crystal fiber(H-D-PCF) based polarization splitter, both ER and bandwidth of the O-D-PCF based one are effectively improved.