In order to improve the thermal stability of condensed polynuclear aromatic(COPNA) resin synthesized from vacuum residue, 1,4-benzenedimethanol was added to cure COPNA resin. The curing mechanism was investigated by p...In order to improve the thermal stability of condensed polynuclear aromatic(COPNA) resin synthesized from vacuum residue, 1,4-benzenedimethanol was added to cure COPNA resin. The curing mechanism was investigated by proton nuclear magnetic resonance spectrometry, solid carbon-13 nuclear magnetic resonance spectrometry and Fourier transform infrared spectroscopy. Microstructures of the uncured and the cured COPNA resins were studied by scanning electron microscopy and X-ray diffractometry. The thermal stability of COPNA resins before and after curing was tested by thermogravimetric analysis. The element composition of the cured COPNA resin heated at different temperatures was analyzed by an element analyzer. The results showed that the uncured COPNA resin reacted with the cross-linking agent during the curing process, and the curing mechanism was confirmed to be the electrophilic substitution reaction. Compared with the uncured COPNA resin, the cured COPNA resin had a smooth surface, well-ordered and streamlined sheet structure with more crystalline solids, better molecular arrangement and orientation. The weight loss process of the uncured and cured COPNA resins was divided into three stages. Carbon residue of the cured COPNA resin was 41.65% at 600 ℃, which was much higher than 25.02% of the uncured COPNA resin, which indicated that the cured COPNA resin had higher thermal stability.展开更多
Dynamic characteristics of UV enhanced gas–solid PVC chlorination process were revealed by a UV–Vis spectral online analysis method. Experimental results showed an instantaneous increase of the chlorination rate as ...Dynamic characteristics of UV enhanced gas–solid PVC chlorination process were revealed by a UV–Vis spectral online analysis method. Experimental results showed an instantaneous increase of the chlorination rate as soon as UV light was affiliated, which demonstrated the intensified effect of UV radiation on PVC chlorination directly.Different affiliation methods of UV light were then studied, proving that continuous UV radiation could enhance the chlorination process significantly while intermittent UV radiation was able to initiate the chlorination reaction once it was conducted. Besides, experiments were carried out to study the influences of parameters on the chlorination process such as UV wavelength, chlorination temperature, partial pressure of chlorine gas and PVC raw materials. Among all the parameters, chlorination temperature and partial pressure of chlorine gas were testified as two key factors to determine the chlorination performance. Thermal analysis of CPVC products showed that their corresponding properties such as the glass transition temperature(Tg) and the homogeneity of chlorine distribution in polymer phase were improved with the increase of chlorine content.展开更多
[Objective]The aim was to find a way to measure the cholesterol content in deserted oil.[Method]Dual-wavelength spectrophotometry method was used for the determination of cholesterol in edible oil.630 nm and 720 nm we...[Objective]The aim was to find a way to measure the cholesterol content in deserted oil.[Method]Dual-wavelength spectrophotometry method was used for the determination of cholesterol in edible oil.630 nm and 720 nm were set as target band and reference band in this method,respectively.The result was compared to liquid chromatography method.[Result]The relative standard deviation(RSD)was at 1.26% and recovery was between 101.9% and 110.7%.Linear range was 8.0-40.0 μg/ml.The tested result was close to the result of liquid chromatography.[Conclusion]It was proved that this method was easy,fast and accurate.The disturbance of sitosterol was eliminated without isolation.It can be used for fast identification of the authenticity of waste fat.展开更多
The simple approach to acquire the fltaxescenee spectra of vitamin bl, b2 and t6 is proposed by direct ilhanination on solid powder sample. The experimentally acquired fluorescence spectra are in accordance with the p...The simple approach to acquire the fltaxescenee spectra of vitamin bl, b2 and t6 is proposed by direct ilhanination on solid powder sample. The experimentally acquired fluorescence spectra are in accordance with the previous measurements on soluble samples. The fluorescence spectra for a mixture of vitamins bl, b2 and b6 with different concentrations have been investigated, and the fluorescence mechanism is explained on the basis of moleoalar struchture Possible reasons of the blue-shift of the fluorescence peak and enhancement of the peak power are explained as well. The advantages of solid powder method is analyzed and discussed.展开更多
The problem of collecting solar energy and increasing its efficiency was studied in this paper. It was discovered that a 3DPV （three-dimensional photovoltaic） structures can generate greater amounts of measured ener...The problem of collecting solar energy and increasing its efficiency was studied in this paper. It was discovered that a 3DPV （three-dimensional photovoltaic） structures can generate greater amounts of measured energy densities than stationary flat PV panels （rate： 2 to 20）. It has been found that the same structures work better not only because they are made in 3D but because PV panels do not have linear dependency on geometry. It seems that the conversion efficiency depends on the process of absorption of the solar energy, too, or in other words on the E. Yablonovich limit. The findings suggest that the quantity of material of solar panels may be reduced to generate the same amount of electricity.展开更多
A rapid, precise, sensitive and simple method has been developed for the extraction and determination of TPT （triphenyltin）, DPT （diphenyltin） and MPT （monophenyltin） in seawater samples. The procedure is based ...A rapid, precise, sensitive and simple method has been developed for the extraction and determination of TPT （triphenyltin）, DPT （diphenyltin） and MPT （monophenyltin） in seawater samples. The procedure is based on the use of the dual functionalization of mesoporous silica with diol and Cl6 alkane groups for the collection of TPT and its derivatives, DPT and MPT, from seawater samples, followed by ethylation of the target matrices using sodium tetraethylborate （NaBEt4） and quantification by gas chromatography with pulsed flame photometric detection. The modified extraction method replaces conventional solid- and liquid-phase extraction with solid dispersion of silica nanoparticles. The partitioning of the analyte between a carefully size-selected silica nanoparticles （solid phase） and a liquid phase occurs as the solid moves through the sample as a colloidal sol. By tailoring the size of the particles to approximately 250 nm in diameter, they can be easily dispersed in aqueous solution, without the need for any mechanical or hand shaking and the solid can then be readily recovered, together with the analytes, by simple filtration or centrifugation. Recoveries of TPT, DPT and MPT chloride spiked matrices rang from 87.3±1.1 to 98.1±1.3 in seawater samples （n = I 1 samples）. The limit of detection obtained was typically in the range of 0.1-3 ng Sn/L. The proposed method shows excellent linearity in the range of 0.5-2 ng Sn/L and good repeatability （RSD 〈 5% at 0.02 ng TPT （as Sn）/L）. The method performance is demonstrated with real seawater samples.展开更多
A series of Sr3Y(PO4)3:Eu2+ samples are synthesized by the high temperature solid-state method. Sr3Y(PO4)3:Eu2+shows an asymmetrical emission band under excitation of 350 nm. The emission peaks at 426 nm and 497 nm ar...A series of Sr3Y(PO4)3:Eu2+ samples are synthesized by the high temperature solid-state method. Sr3Y(PO4)3:Eu2+shows an asymmetrical emission band under excitation of 350 nm. The emission peaks at 426 nm and 497 nm are assigned to the nine-coordination Eu2+ and six-coordination Eu2+, respectively. The effects of Eu2+ doping content on the emission intensity and color are observed, and the concentration quenching effect is also observed. For two different Eu2+ luminescence centers, the quenching mechanisms are dipole-dipole interaction and quadrupole-quadrupole interaction, respectively. And the critical distance of energy transfer is calculated by concentration quenching and turns out to be about 3.67 nm. The results above show that the asymmetrical emission band of Sr3Y(PO4)3:Eu2+ comes from two different Eu2+ luminescence centers in the lattice.展开更多
基金supported by the National Natural Science Foundation of China(51172285 and 51372277)the Fundamental Research Funds for the Central Universities(14CX02060A,15CX02084A)the Natural Science Foundation of Shandong Province(ZR2011EL030)
文摘In order to improve the thermal stability of condensed polynuclear aromatic(COPNA) resin synthesized from vacuum residue, 1,4-benzenedimethanol was added to cure COPNA resin. The curing mechanism was investigated by proton nuclear magnetic resonance spectrometry, solid carbon-13 nuclear magnetic resonance spectrometry and Fourier transform infrared spectroscopy. Microstructures of the uncured and the cured COPNA resins were studied by scanning electron microscopy and X-ray diffractometry. The thermal stability of COPNA resins before and after curing was tested by thermogravimetric analysis. The element composition of the cured COPNA resin heated at different temperatures was analyzed by an element analyzer. The results showed that the uncured COPNA resin reacted with the cross-linking agent during the curing process, and the curing mechanism was confirmed to be the electrophilic substitution reaction. Compared with the uncured COPNA resin, the cured COPNA resin had a smooth surface, well-ordered and streamlined sheet structure with more crystalline solids, better molecular arrangement and orientation. The weight loss process of the uncured and cured COPNA resins was divided into three stages. Carbon residue of the cured COPNA resin was 41.65% at 600 ℃, which was much higher than 25.02% of the uncured COPNA resin, which indicated that the cured COPNA resin had higher thermal stability.
基金Supported by the National Science and Technology Key Supporting Project(2013BAF08B05)the National Natural Science Foundation of China(21176137)
文摘Dynamic characteristics of UV enhanced gas–solid PVC chlorination process were revealed by a UV–Vis spectral online analysis method. Experimental results showed an instantaneous increase of the chlorination rate as soon as UV light was affiliated, which demonstrated the intensified effect of UV radiation on PVC chlorination directly.Different affiliation methods of UV light were then studied, proving that continuous UV radiation could enhance the chlorination process significantly while intermittent UV radiation was able to initiate the chlorination reaction once it was conducted. Besides, experiments were carried out to study the influences of parameters on the chlorination process such as UV wavelength, chlorination temperature, partial pressure of chlorine gas and PVC raw materials. Among all the parameters, chlorination temperature and partial pressure of chlorine gas were testified as two key factors to determine the chlorination performance. Thermal analysis of CPVC products showed that their corresponding properties such as the glass transition temperature(Tg) and the homogeneity of chlorine distribution in polymer phase were improved with the increase of chlorine content.
基金Supported by National Quality Inspection Bureau(KJ092102,2009QK146)
文摘[Objective]The aim was to find a way to measure the cholesterol content in deserted oil.[Method]Dual-wavelength spectrophotometry method was used for the determination of cholesterol in edible oil.630 nm and 720 nm were set as target band and reference band in this method,respectively.The result was compared to liquid chromatography method.[Result]The relative standard deviation(RSD)was at 1.26% and recovery was between 101.9% and 110.7%.Linear range was 8.0-40.0 μg/ml.The tested result was close to the result of liquid chromatography.[Conclusion]It was proved that this method was easy,fast and accurate.The disturbance of sitosterol was eliminated without isolation.It can be used for fast identification of the authenticity of waste fat.
基金supported by the Tianjin Natural Science Foundation(No.06YFJZJC00300)the Natural Science Foundation of China(Nos.10674075,10774077,10674074,50802044 and 60736039)
文摘The simple approach to acquire the fltaxescenee spectra of vitamin bl, b2 and t6 is proposed by direct ilhanination on solid powder sample. The experimentally acquired fluorescence spectra are in accordance with the previous measurements on soluble samples. The fluorescence spectra for a mixture of vitamins bl, b2 and b6 with different concentrations have been investigated, and the fluorescence mechanism is explained on the basis of moleoalar struchture Possible reasons of the blue-shift of the fluorescence peak and enhancement of the peak power are explained as well. The advantages of solid powder method is analyzed and discussed.
文摘The problem of collecting solar energy and increasing its efficiency was studied in this paper. It was discovered that a 3DPV （three-dimensional photovoltaic） structures can generate greater amounts of measured energy densities than stationary flat PV panels （rate： 2 to 20）. It has been found that the same structures work better not only because they are made in 3D but because PV panels do not have linear dependency on geometry. It seems that the conversion efficiency depends on the process of absorption of the solar energy, too, or in other words on the E. Yablonovich limit. The findings suggest that the quantity of material of solar panels may be reduced to generate the same amount of electricity.
文摘A rapid, precise, sensitive and simple method has been developed for the extraction and determination of TPT （triphenyltin）, DPT （diphenyltin） and MPT （monophenyltin） in seawater samples. The procedure is based on the use of the dual functionalization of mesoporous silica with diol and Cl6 alkane groups for the collection of TPT and its derivatives, DPT and MPT, from seawater samples, followed by ethylation of the target matrices using sodium tetraethylborate （NaBEt4） and quantification by gas chromatography with pulsed flame photometric detection. The modified extraction method replaces conventional solid- and liquid-phase extraction with solid dispersion of silica nanoparticles. The partitioning of the analyte between a carefully size-selected silica nanoparticles （solid phase） and a liquid phase occurs as the solid moves through the sample as a colloidal sol. By tailoring the size of the particles to approximately 250 nm in diameter, they can be easily dispersed in aqueous solution, without the need for any mechanical or hand shaking and the solid can then be readily recovered, together with the analytes, by simple filtration or centrifugation. Recoveries of TPT, DPT and MPT chloride spiked matrices rang from 87.3±1.1 to 98.1±1.3 in seawater samples （n = I 1 samples）. The limit of detection obtained was typically in the range of 0.1-3 ng Sn/L. The proposed method shows excellent linearity in the range of 0.5-2 ng Sn/L and good repeatability （RSD 〈 5% at 0.02 ng TPT （as Sn）/L）. The method performance is demonstrated with real seawater samples.
基金supported by the National Natural Science Foundation of China(No.50902042)the Natural Science Foundation of Hebei Province of China(Nos.A2014201035 and E2014201037)the Education Office Research Foundation of Hebei Province of China(Nos.ZD2014036 and QN2014085)
文摘A series of Sr3Y(PO4)3:Eu2+ samples are synthesized by the high temperature solid-state method. Sr3Y(PO4)3:Eu2+shows an asymmetrical emission band under excitation of 350 nm. The emission peaks at 426 nm and 497 nm are assigned to the nine-coordination Eu2+ and six-coordination Eu2+, respectively. The effects of Eu2+ doping content on the emission intensity and color are observed, and the concentration quenching effect is also observed. For two different Eu2+ luminescence centers, the quenching mechanisms are dipole-dipole interaction and quadrupole-quadrupole interaction, respectively. And the critical distance of energy transfer is calculated by concentration quenching and turns out to be about 3.67 nm. The results above show that the asymmetrical emission band of Sr3Y(PO4)3:Eu2+ comes from two different Eu2+ luminescence centers in the lattice.
