Optimized 2×2 switches based on silicon-on-insulator (SOI) were demonstrated. In the design, single mode rib waveguidesand multimode interferences (MMIs) are connected by tapered waveguides to reduce the mode cou...Optimized 2×2 switches based on silicon-on-insulator (SOI) were demonstrated. In the design, single mode rib waveguidesand multimode interferences (MMIs) are connected by tapered waveguides to reduce the mode coupling loss between thetwo types of waveguides. The average insertion loss of the switches is about -16.9 dB and the excess loss of one is measuredof -1.3 dB. The worst crosstalk is larger than 25 dB. Experimental results indicate that some of the main characteristics ofoptical switches are improved in the modified design, which is according with theoretic analysis. The novel design can beused to improve the characteristics of optical switch matrixes based on 2×2 switch units.展开更多
A silicon-on-insulator 2× 2 Mach-Zehnder thermo-optical switch is developed based on strongly guided paired multimode interference couplers. The multimode-interference couplers were etched deeply for improving co...A silicon-on-insulator 2× 2 Mach-Zehnder thermo-optical switch is developed based on strongly guided paired multimode interference couplers. The multimode-interference couplers were etched deeply for improving coupler characteristics such as self-imaging quality, uniformity and fabrication toierance. The proposed switch achieves good performances, including a low insertion loss of -11.0dB, a fiber-waveguide coupling loss of-4.3dB and a fast response speed measured to be 3.5 and 8.8 μs for raise and fall switching time, respectively.展开更多
Design optimization of a novel integrated triplexer based on planar lightwave circuit (PLC) for fiber-to-the-home applica- tions is described. The two-mode interference coupler and Mach-Zehnder interference are used t...Design optimization of a novel integrated triplexer based on planar lightwave circuit (PLC) for fiber-to-the-home applica- tions is described. The two-mode interference coupler and Mach-Zehnder interference are used to construct the filter chip. Simulation results of high isolation and low insertion loss are gotten for proposed design. Technique tolerance is improved for fabricating device.展开更多
Subwavelength grating(SWG) waveguides in silicon-on-insulator are emerging as an enabling technology for implementing compact, high-performance photonic integrated devices and circuits for signal processing and sensin...Subwavelength grating(SWG) waveguides in silicon-on-insulator are emerging as an enabling technology for implementing compact, high-performance photonic integrated devices and circuits for signal processing and sensing applications. We provide an overview of our recent work on developing wavelength selective SWG waveguide filters based on Bragg gratings and ring resonators, as well as optical delay lines. These components increase the SWG waveguide component toolbox and can be used to realize more complex photonic integrated circuits with enhanced or new functionality.展开更多
基金This work was supported in part by the National Science Founda-tion of China (Grant No.60577044)the Ministry of Scienceand Technology "973" Plan (No.2006CB302803)
文摘Optimized 2×2 switches based on silicon-on-insulator (SOI) were demonstrated. In the design, single mode rib waveguidesand multimode interferences (MMIs) are connected by tapered waveguides to reduce the mode coupling loss between thetwo types of waveguides. The average insertion loss of the switches is about -16.9 dB and the excess loss of one is measuredof -1.3 dB. The worst crosstalk is larger than 25 dB. Experimental results indicate that some of the main characteristics ofoptical switches are improved in the modified design, which is according with theoretic analysis. The novel design can beused to improve the characteristics of optical switch matrixes based on 2×2 switch units.
基金Supported in part by the National "973" Plan (No. G2000-03-66and No.2006CB921702)National Natural Science Foundationof China(NO. 10674185)the Science Foundation of the Cen-tral University for Nationalities (No. CUN07A)
文摘A silicon-on-insulator 2× 2 Mach-Zehnder thermo-optical switch is developed based on strongly guided paired multimode interference couplers. The multimode-interference couplers were etched deeply for improving coupler characteristics such as self-imaging quality, uniformity and fabrication toierance. The proposed switch achieves good performances, including a low insertion loss of -11.0dB, a fiber-waveguide coupling loss of-4.3dB and a fast response speed measured to be 3.5 and 8.8 μs for raise and fall switching time, respectively.
文摘Design optimization of a novel integrated triplexer based on planar lightwave circuit (PLC) for fiber-to-the-home applica- tions is described. The two-mode interference coupler and Mach-Zehnder interference are used to construct the filter chip. Simulation results of high isolation and low insertion loss are gotten for proposed design. Technique tolerance is improved for fabricating device.
基金supported in part by the NSERC NGON and Si EPIC CREATE programs,NSERC SPG,and the Royal Society International Exchanges Scheme 2012/R2
文摘Subwavelength grating(SWG) waveguides in silicon-on-insulator are emerging as an enabling technology for implementing compact, high-performance photonic integrated devices and circuits for signal processing and sensing applications. We provide an overview of our recent work on developing wavelength selective SWG waveguide filters based on Bragg gratings and ring resonators, as well as optical delay lines. These components increase the SWG waveguide component toolbox and can be used to realize more complex photonic integrated circuits with enhanced or new functionality.
