一种基于简化光环境数学模型的光溢散计算评价方法

阐述了当前照明设计快速发展下对光溢散污染考虑的空缺,分析关于光溢散的研究方法特点。从结合考虑灯及其所在的环境角度出发,通过建立简化光环境数学模型,提出一种采用正向思维方式的光溢散度计算和评价方法,并指出其意义。

谈数码相机的常见缺陷

在数码相机生成的数字影像上,会出现一些传统照片中没见过的色彩伪像、光溢、"毛刺"与"勾边"、色差、数码镜头景深的变化、宽容度等质量缺陷,在使用时应该特别注意,尽量避免。

Field Experiments of Multi-Channel Oceanographic Fluorescence Lidar for Oil Spill and Chlorophyll-a Detection

A Multi-channel Oceanographic Fluorescence Lidar(MOFL), with a UV excitation at 355 nm and multiple receiving channels at typical wavelengths of fluorescence from oil spills and chlorophyll-a(Chl-a), has been developed using the Laser- induced Fluorescence(LIF) technique. The sketch of the MOFL system equipped with a compact multi-channel photomultiplier tube(MPMT) is introduced in the paper. The methods of differentiating the oil fluorescence from the background water fluorescence and evaluating the Chl-a concentration are described. Two field experiments were carried out to investigate the field performance of the system, i.e., an experiment in coastal areas for oil pollution detection and an experiment over the Yellow Sea for Chl-a monitoring. In the coastal experiment, several oil samples and other fluorescence substances were used to analyze the fluorescence spectral characteristics for oil identification, and to estimate the thickness of oil films at the water surface. The experiment shows that both the spectral shape of fluorescence induced from surface water and the intensity ratio of two channels(I495/I405) are essential to determine oil-spill occurrence. In the airborne experiment, MOFL was applied to measure relative Chl-a concentrations in the upper layer of the ocean. A comparison of relative Chl-a concentration measurements by MOFL and the Moderate Resolution Imaging Spectroradiometer(MODIS) indicates that the two datasets are in good agreement. The results show that the MOFL system is capable of monitoring oil spills and Chl-a in the upper layer of ocean water.

Abundance quantification by independent component analysis of hyperspectral imagery for oil spill coverage calculation

The estimation of oil spill coverage is an important part of monitoring of oil spills at sea.The spatial resolution of images collected by airborne hyper-spectral remote sensing limits both the detection of oil spills and the accuracy of estimates of their size.We consider at-sea oil spills with zonal distribution in this paper and improve the traditional independent component analysis algorithm.For each independent component we added two constraint conditions:non-negativity and constant sum.We use priority weighting by higher-order statistics,and then the spectral angle match method to overcome the order nondeterminacy.By these steps,endmembers can be extracted and abundance quantified simultaneously.To examine the coverage of a real oil spill and correct our estimate,a simulation experiment and a real experiment were designed using the algorithm described above.The result indicated that,for the simulation data,the abundance estimation error is 2.52% and minimum root mean square error of the reconstructed image is 0.030 6.We estimated the oil spill rate and area based on eight hyper-spectral remote sensing images collected by an airborne survey of Shandong Changdao in 2011.The total oil spill area was 0.224 km^2,and the oil spill rate was 22.89%.The method we demonstrate in this paper can be used for the automatic monitoring of oil spill coverage rates.It also allows the accurate estimation of the oil spill area.

Oil spill sorption using raw and acetylated sugarcane bagasse

In the recent decades oil spills in the aquatic environments are one of the major sources of environmental pollutions, which are steadily growing with the increase in oil consumption. Adsorption is a rapid and cost effective process to minimize the environmental impacts of oil spills and cleanup these pollutants. In this work, the crude oil sorption capacity was examined with raw sugarcane bagasse and acetylated sugarcane bagasse. Results show that the acetylated bagasse was significantly more oleophilic than the raw bagasse and acetylation reaction can increase bagasse oil sorption ability by about 90%. The maximum sorption capacities of acetylated bagasse were obtained about 11.3 g and 9.1 g in dry system(crude oil sorption) and oil layer sorption, respectively. The physicochemical characteristics of the sorbents such as composition, water solubility, moisture content and density were measured according to ASTM standard methods. Also Fourier transform infrared spectroscopy(FTIR) of raw and acetylated bagasse was performed to investigate the effect of acetylation on sugarcane bagasse structure.

Identification of active sites for hydrogenation over Ru/SBA-15 using in situ Fourier-transform infrared spectroscopy

The active sites for hydrogenation over Ru/SBA‐15catalysts were identified using in situ Fourier‐transform infrared spectroscopy.The amount of active sites was proportional to the interfacial circumference of the Ru particles.In contrast,the rate of hydrogen spillover from Ru to the support was inversely proportional to the size of the Ru metal particles.Consequently,a catalyst with small Ru metal particles has a high rate of hydrogen spillover but a low density of active sites,whereas one with large Ru particles has a low rate of hydrogen spillover but a high density of active sites.The formation of these active sites is probably an intermediate step in hydrogen spillover.