A new photodetector--bipolar junction photogate transistor is presented for CMOS image sensor and its analytical model is also established.With the technical parameter of the 0.6μm CMOS process,the bipolar junction p...A new photodetector--bipolar junction photogate transistor is presented for CMOS image sensor and its analytical model is also established.With the technical parameter of the 0.6μm CMOS process,the bipolar junction photogate transistor is analyzed and simulated.The simulated results illustrate that the bipolar junction photogate transistor has the similar characteristics of the traditional photogate transistor.The photocurrent density of the bipolar junction photogate transistor increases exponentially with the incidence light power due to introducing the injection p+n junction.Its characteristic of blue response is rather improved compared to the traditional photogate transistor that benefits to increase the color photograph made up of the red,the green,and the blue.展开更多
In this study,we have developed a high-sensitivity,near-infrared photodetector based on PdSe2/GaAs heterojunction,which was made by transferring a multilayered PdSe2 film onto a planar GaAs.The as-fabricated PdSe2/GaA...In this study,we have developed a high-sensitivity,near-infrared photodetector based on PdSe2/GaAs heterojunction,which was made by transferring a multilayered PdSe2 film onto a planar GaAs.The as-fabricated PdSe2/GaAs heterojunction device exhibited obvious photovoltaic behavior to 808 nm illumination,indicating that the near-infrared photodetector can be used as a self-driven device without external power supply.Further device analysis showed that the hybrid heterojunction exhibited a high on/off ratio of 1.16×10^5 measured at 808 nm under zero bias voltage.The responsivity and specific detectivity of photodetector were estimated to be 171.34 mA/W and 2.36×10^11 Jones,respectively.Moreover,the device showed excellent stability and reliable repeatability.After 2 months,the photoelectric characteristics of the near-infrared photodetector hardly degrade in air,attributable to the good stability of the PdSe2.Finally,the PdSe2/GaAs-based heterojunction device can also function as a near-infrared light sensor.展开更多
The special character of a PCF which is used as a gas or liquid sensor is discussed. The field distribution is analyzed when the solid core PCF is injected with different medium that has different relative dielectric ...The special character of a PCF which is used as a gas or liquid sensor is discussed. The field distribution is analyzed when the solid core PCF is injected with different medium that has different relative dielectric constant （or refractive index）. And the experiential formulas of the relation between refractive index of some kinds of liquid and their concentration are given, in order to measure the concentration of the relative liquid. At the same time, the effect of propagation constant on PCF sensor character is also discussed. Furthermore, the photonic medium relative dielectric constant, when it is injected with . band-gap （PBG） of PCF （PBG-PCF） is calculated at different different medium. That is the principle basis for this kind of PCF sensors.展开更多
Theoretically and experimentally, the effects of temperature on the weak principal axis of twisted optical fiber loop are analyzed, and the results show that the location of the pair of weak principal axis will drift ...Theoretically and experimentally, the effects of temperature on the weak principal axis of twisted optical fiber loop are analyzed, and the results show that the location of the pair of weak principal axis will drift with temperature change, which will deteriorate the stability of system when applied to sensor system. In this paper, the influence of phase drift of weak principal axis on the performance of optical fiber current sensor is mainly predicted theoretically. Our research results will provide a beneficial reference for improving optical fiber sensor system.展开更多
A robot slide tactile sensor based on photoelectric devices is introduced.The sensor is mounted on the hydraulic manipulator and used in a soft grasp control system.The experimental results are also presented.
The stronglink with muhi-try function based on MEMS technology and the PC startup in authentication system have been designed and fabricated. The generation principle and structure of UQS code are introduced, which co...The stronglink with muhi-try function based on MEMS technology and the PC startup in authentication system have been designed and fabricated. The generation principle and structure of UQS code are introduced, which consists of two groups of metal counter-meshing gears, two pawl/ratchet mechanisms, two driving micromotors and two resetting micromotors. The energy-coupling element is a photoelectric sensor with a circular and notched plate. It is fabricated using the UV-LiGA process and precision mechanical engineering. The PC startup authentication system is controlled by BIOS program, which is written into the chip according with special format. The program in BIOS output signals controls the running of stronglink to finish the process of authentication. The device can run more than 10000 times before a stop. The driving voltage is 12 V, and the normal decoding time is 3 s.展开更多
Radio-over-Fiber （RoF） technologies have been considered to be a promising solution to broadband access and ubiquitous sensing. We present a novel approach using dual-wavelength lights to suppress the nonlinear inte...Radio-over-Fiber （RoF） technologies have been considered to be a promising solution to broadband access and ubiquitous sensing. We present a novel approach using dual-wavelength lights to suppress the nonlinear intermodulation distortion in intensity-modulated RoF link both theoretically and experimentally. The system we proposed rminly consists of two Laser Diodes （LDs） at different wavelengths, a commercial available Mach-Zehnder Modulator （MZM） and a Photo Detector （PD）. More than 25 dB suppression of the Third-order Interrnodulation Distortion （IMD3） is achieved by adjusting the wavelength and opti- cal power of the laser. Besides, the output of the MZM is then sent to the photodetector via a single fiber, which simplifies the system complexity for distrbution of RF signals over long distances.展开更多
Abstract: The current measuring principle, the hardware structure and the software functions of a high voltage breaker current monitoring and fault diagnosis system are introduced. A simple algorithm for calculating t...Abstract: The current measuring principle, the hardware structure and the software functions of a high voltage breaker current monitoring and fault diagnosis system are introduced. A simple algorithm for calculating the current effective value is given. The cut - off characteristics of the breaker are classified. This system can provide a foundation for reasonably determining the breaker service period.展开更多
The paper has presented the impact on the line protection performance with the introduction of MUs （merging units） in the process bus level. The paper begins with the introduction on modem digital substation structu...The paper has presented the impact on the line protection performance with the introduction of MUs （merging units） in the process bus level. The paper begins with the introduction on modem digital substation structure and process bus. Then, the paper describes the performances of different sensors such as CTs （current transformers）, CVTs （capacitive voltage transformers）, FOCS （fiber optical current transducers） and FOVS （fiber optical voltage transducers）. With the use of above transducers together with MUs, the performance of distance protection function and line differential protection function have been investigated and presented. Finally, conclusions based on the study are presented in the paper.展开更多
On the basis of analysis on the temperature monitoring methods for high voltage devices, a new type of fiber optic sensor structure with reference channel is given. And the operation principle of fiber optic sensor is...On the basis of analysis on the temperature monitoring methods for high voltage devices, a new type of fiber optic sensor structure with reference channel is given. And the operation principle of fiber optic sensor is analysed at large based on the absorption of semiconductor chip. The mathematical model of both devices and the whole system are also given. It is proved by the experiment that this mathematical model is reliable.展开更多
A theoretical model for describing the operation of an electro-optical polarization controller on LiNbO3 is presented. The model can be used to optimize the device’s structure and parameters to reach a specific polar...A theoretical model for describing the operation of an electro-optical polarization controller on LiNbO3 is presented. The model can be used to optimize the device’s structure and parameters to reach a specific polarization control. Meanwhile, some aspects on the design of an electro-optical polarization controller are described.展开更多
Based on the theory of thermal radiation,a contact type optical fiber pyrometer applied in IC engine is put forward.It is composed of three parts:a blackbody probe,optical system,electrical process system.The key tech...Based on the theory of thermal radiation,a contact type optical fiber pyrometer applied in IC engine is put forward.It is composed of three parts:a blackbody probe,optical system,electrical process system.The key technology of design is discussed.Experiment is given to prove that the pyrometer has much higher responsive speed,distinguishability and much longer running life than other pyrometers.展开更多
A 1 550 nm polarization-insensitive semiconductor optical amplifier (SOA) was fabricated with InGaAs tensile-strained bulk active region.Beam propagation method and planar wave expansion method are used to calculate t...A 1 550 nm polarization-insensitive semiconductor optical amplifier (SOA) was fabricated with InGaAs tensile-strained bulk active region.Beam propagation method and planar wave expansion method are used to calculate the mode field profile and the mode reflectivity.For the SOA with a buried waveguide deviated 7° from the normal direction of cleaved mirrors,the thickness tolerance of the mirror is 3% for keeping the reflectivity of TE mode and TM mode less than 10 -4 simultaneously.For a SOA with a cavity length of 800 μm,the polarization sensitivity of amplified spontaneous emission spectra is less than 0.5 dB at an injection current of 250 mA,the corresponding fiber-to-fiber gain is 11.9 dB at 1 550 nm with a 3 dB bandwidth of 63 nm ,and the saturation output power is 5.6 dBm .The noise figure shows 8.8 and 7.8 dB at 1 550 and 1 570 nm,respectively.For a packaged SOA with a cavity length of 1 000 μm,the fiber-to-fiber gain is 15 dB at an injection current of 190 mA.展开更多
On the basis of optically powered sensor principles,this paper introduces a practical scheme of an optically powered force sensor using a piezoelectric crystal worlding in close-loop resonant mode.A 3 mW LD stabilized...On the basis of optically powered sensor principles,this paper introduces a practical scheme of an optically powered force sensor using a piezoelectric crystal worlding in close-loop resonant mode.A 3 mW LD stabilized is used as optical source.The optical powering distance reaches 500 m while the total power consumption of the micro power measuring head is only 0.275 mW.The key technical problems of the sensors are presented as well as experimental results.展开更多
The structure of the optical waveguide of 2-bit electrooptic A/D converter with proton-exchange micro prisms is optimized by the finite-difference beam propagation method (FD-BPM). The electrode parameters of the conv...The structure of the optical waveguide of 2-bit electrooptic A/D converter with proton-exchange micro prisms is optimized by the finite-difference beam propagation method (FD-BPM). The electrode parameters of the converter are optimized by conformal mapping. The optimal parameters are a half-wave voltage of (Vπ= 4.5 V) and a bandwidth of (Δf=1.4 GHz).A normalized transmitted power of 69.75% is obtained by FD-BMP and the output waveguide gap is 300 μm.展开更多
In order to achieve the manipulator's soft grasp function, the key is to have slip sensors with fine performance. Depending on the elastomer and photoelectric elements installed in the hand, the sensor transforms ...In order to achieve the manipulator's soft grasp function, the key is to have slip sensors with fine performance. Depending on the elastomer and photoelectric elements installed in the hand, the sensor transforms the slippage between the grasped object and the robot's hand to electric signal, thus the slippage can be detected. It will cause elastomers' micro-vibration when the object is slippage. Based on the vibration theory, dynamic theory, light intensity theory and elastic deformation theory, derived is the conclusion that the object's slippage acceleration relativing to the robot's hand has linear relationship with the photoelectric elements' output voltage's differential, and then the model for slippage distinguishing is set up.展开更多
A 320×240 CMOS image sensor is demonstrated,which is implemented by a standard 0.6 μm 2P2M CMOS process.For reducing the chip area,each 2×2-pixel block shares a sample/hold circuit,analog-to-digital convert...A 320×240 CMOS image sensor is demonstrated,which is implemented by a standard 0.6 μm 2P2M CMOS process.For reducing the chip area,each 2×2-pixel block shares a sample/hold circuit,analog-to-digital converter and 1-b memory.The 2×2 pixel pitch has an area of 40 μm×40 μm and the fill factor is about 16%.While operating at a low frame rate,the sensor dissipates a very low power by power-management circuit making pixel-level comparators in an idle state.A digital correlated double sampling,which eliminates fixed pattern noise,improves SNR of the sensor, and multiple sampling operations make the sensor have a wide dynamic range.展开更多
A practical optical fiber differential pressure sensor is presented at first. Then the techniques of light source feedback, set up of reference channel, proportional measurement and other methods to improve the stabil...A practical optical fiber differential pressure sensor is presented at first. Then the techniques of light source feedback, set up of reference channel, proportional measurement and other methods to improve the stability of the system as well as to reduce the interference with same nature are emphatically discussed. Finally, the experiment results of the developed instrument are given.展开更多
The ratio measurement by means of the sensing optical fiber and the reference fiber with different beginning positions, and the technique to improve the stability of the sensor are first described. Then the ability to...The ratio measurement by means of the sensing optical fiber and the reference fiber with different beginning positions, and the technique to improve the stability of the sensor are first described. Then the ability to restrain and compensate the interference of the same nature through the double channel ratio measurement is illustrated. Finally, the performance of sensor and its engineering design are discussed.展开更多
文摘A new photodetector--bipolar junction photogate transistor is presented for CMOS image sensor and its analytical model is also established.With the technical parameter of the 0.6μm CMOS process,the bipolar junction photogate transistor is analyzed and simulated.The simulated results illustrate that the bipolar junction photogate transistor has the similar characteristics of the traditional photogate transistor.The photocurrent density of the bipolar junction photogate transistor increases exponentially with the incidence light power due to introducing the injection p+n junction.Its characteristic of blue response is rather improved compared to the traditional photogate transistor that benefits to increase the color photograph made up of the red,the green,and the blue.
基金supported by the National Natural Science Foundation of China(No.61575059,No.61675062,No.21501038)the Fundamental Research Funds for the Central Universities(No.JZ2018HGPB0275,No.JZ2018HGTA0220,and No.JZ2018HGXC0001).
文摘In this study,we have developed a high-sensitivity,near-infrared photodetector based on PdSe2/GaAs heterojunction,which was made by transferring a multilayered PdSe2 film onto a planar GaAs.The as-fabricated PdSe2/GaAs heterojunction device exhibited obvious photovoltaic behavior to 808 nm illumination,indicating that the near-infrared photodetector can be used as a self-driven device without external power supply.Further device analysis showed that the hybrid heterojunction exhibited a high on/off ratio of 1.16×10^5 measured at 808 nm under zero bias voltage.The responsivity and specific detectivity of photodetector were estimated to be 171.34 mA/W and 2.36×10^11 Jones,respectively.Moreover,the device showed excellent stability and reliable repeatability.After 2 months,the photoelectric characteristics of the near-infrared photodetector hardly degrade in air,attributable to the good stability of the PdSe2.Finally,the PdSe2/GaAs-based heterojunction device can also function as a near-infrared light sensor.
文摘The special character of a PCF which is used as a gas or liquid sensor is discussed. The field distribution is analyzed when the solid core PCF is injected with different medium that has different relative dielectric constant （or refractive index）. And the experiential formulas of the relation between refractive index of some kinds of liquid and their concentration are given, in order to measure the concentration of the relative liquid. At the same time, the effect of propagation constant on PCF sensor character is also discussed. Furthermore, the photonic medium relative dielectric constant, when it is injected with . band-gap （PBG） of PCF （PBG-PCF） is calculated at different different medium. That is the principle basis for this kind of PCF sensors.
文摘Theoretically and experimentally, the effects of temperature on the weak principal axis of twisted optical fiber loop are analyzed, and the results show that the location of the pair of weak principal axis will drift with temperature change, which will deteriorate the stability of system when applied to sensor system. In this paper, the influence of phase drift of weak principal axis on the performance of optical fiber current sensor is mainly predicted theoretically. Our research results will provide a beneficial reference for improving optical fiber sensor system.
文摘A robot slide tactile sensor based on photoelectric devices is introduced.The sensor is mounted on the hydraulic manipulator and used in a soft grasp control system.The experimental results are also presented.
基金Sponsored by the National High Technology Research and Development Program (863 ) of China (Grant No.2003AA404210, 2005AA404250,2003AA404210, 2006AA01Z443)
文摘The stronglink with muhi-try function based on MEMS technology and the PC startup in authentication system have been designed and fabricated. The generation principle and structure of UQS code are introduced, which consists of two groups of metal counter-meshing gears, two pawl/ratchet mechanisms, two driving micromotors and two resetting micromotors. The energy-coupling element is a photoelectric sensor with a circular and notched plate. It is fabricated using the UV-LiGA process and precision mechanical engineering. The PC startup authentication system is controlled by BIOS program, which is written into the chip according with special format. The program in BIOS output signals controls the running of stronglink to finish the process of authentication. The device can run more than 10000 times before a stop. The driving voltage is 12 V, and the normal decoding time is 3 s.
基金Acknowledgements This work was supported by the National Basic Research Program of China under Grant No. 2012CB315705 the Hi-Tech Research and Development Program of China under Grant No. 2011AA010306+2 种基金 the National Natural Science Foundation of China under Grants No. 60736002, No. 60932004, No. 61001121, No. 61107058 and No. 61120106001 the Beijing Excellent Doctoral Thesis Project under Grant No. YB20101001301 and the Cooperation Project between Province and Ministries under Grant No. 201013090400112.
文摘Radio-over-Fiber （RoF） technologies have been considered to be a promising solution to broadband access and ubiquitous sensing. We present a novel approach using dual-wavelength lights to suppress the nonlinear intermodulation distortion in intensity-modulated RoF link both theoretically and experimentally. The system we proposed rminly consists of two Laser Diodes （LDs） at different wavelengths, a commercial available Mach-Zehnder Modulator （MZM） and a Photo Detector （PD）. More than 25 dB suppression of the Third-order Interrnodulation Distortion （IMD3） is achieved by adjusting the wavelength and opti- cal power of the laser. Besides, the output of the MZM is then sent to the photodetector via a single fiber, which simplifies the system complexity for distrbution of RF signals over long distances.
文摘Abstract: The current measuring principle, the hardware structure and the software functions of a high voltage breaker current monitoring and fault diagnosis system are introduced. A simple algorithm for calculating the current effective value is given. The cut - off characteristics of the breaker are classified. This system can provide a foundation for reasonably determining the breaker service period.
文摘The paper has presented the impact on the line protection performance with the introduction of MUs （merging units） in the process bus level. The paper begins with the introduction on modem digital substation structure and process bus. Then, the paper describes the performances of different sensors such as CTs （current transformers）, CVTs （capacitive voltage transformers）, FOCS （fiber optical current transducers） and FOVS （fiber optical voltage transducers）. With the use of above transducers together with MUs, the performance of distance protection function and line differential protection function have been investigated and presented. Finally, conclusions based on the study are presented in the paper.
文摘On the basis of analysis on the temperature monitoring methods for high voltage devices, a new type of fiber optic sensor structure with reference channel is given. And the operation principle of fiber optic sensor is analysed at large based on the absorption of semiconductor chip. The mathematical model of both devices and the whole system are also given. It is proved by the experiment that this mathematical model is reliable.
文摘A theoretical model for describing the operation of an electro-optical polarization controller on LiNbO3 is presented. The model can be used to optimize the device’s structure and parameters to reach a specific polarization control. Meanwhile, some aspects on the design of an electro-optical polarization controller are described.
文摘Based on the theory of thermal radiation,a contact type optical fiber pyrometer applied in IC engine is put forward.It is composed of three parts:a blackbody probe,optical system,electrical process system.The key technology of design is discussed.Experiment is given to prove that the pyrometer has much higher responsive speed,distinguishability and much longer running life than other pyrometers.
文摘A 1 550 nm polarization-insensitive semiconductor optical amplifier (SOA) was fabricated with InGaAs tensile-strained bulk active region.Beam propagation method and planar wave expansion method are used to calculate the mode field profile and the mode reflectivity.For the SOA with a buried waveguide deviated 7° from the normal direction of cleaved mirrors,the thickness tolerance of the mirror is 3% for keeping the reflectivity of TE mode and TM mode less than 10 -4 simultaneously.For a SOA with a cavity length of 800 μm,the polarization sensitivity of amplified spontaneous emission spectra is less than 0.5 dB at an injection current of 250 mA,the corresponding fiber-to-fiber gain is 11.9 dB at 1 550 nm with a 3 dB bandwidth of 63 nm ,and the saturation output power is 5.6 dBm .The noise figure shows 8.8 and 7.8 dB at 1 550 and 1 570 nm,respectively.For a packaged SOA with a cavity length of 1 000 μm,the fiber-to-fiber gain is 15 dB at an injection current of 190 mA.
文摘On the basis of optically powered sensor principles,this paper introduces a practical scheme of an optically powered force sensor using a piezoelectric crystal worlding in close-loop resonant mode.A 3 mW LD stabilized is used as optical source.The optical powering distance reaches 500 m while the total power consumption of the micro power measuring head is only 0.275 mW.The key technical problems of the sensors are presented as well as experimental results.
文摘The structure of the optical waveguide of 2-bit electrooptic A/D converter with proton-exchange micro prisms is optimized by the finite-difference beam propagation method (FD-BPM). The electrode parameters of the converter are optimized by conformal mapping. The optimal parameters are a half-wave voltage of (Vπ= 4.5 V) and a bandwidth of (Δf=1.4 GHz).A normalized transmitted power of 69.75% is obtained by FD-BMP and the output waveguide gap is 300 μm.
基金National Natural Science Foundation of China(50475060)
文摘In order to achieve the manipulator's soft grasp function, the key is to have slip sensors with fine performance. Depending on the elastomer and photoelectric elements installed in the hand, the sensor transforms the slippage between the grasped object and the robot's hand to electric signal, thus the slippage can be detected. It will cause elastomers' micro-vibration when the object is slippage. Based on the vibration theory, dynamic theory, light intensity theory and elastic deformation theory, derived is the conclusion that the object's slippage acceleration relativing to the robot's hand has linear relationship with the photoelectric elements' output voltage's differential, and then the model for slippage distinguishing is set up.
文摘A 320×240 CMOS image sensor is demonstrated,which is implemented by a standard 0.6 μm 2P2M CMOS process.For reducing the chip area,each 2×2-pixel block shares a sample/hold circuit,analog-to-digital converter and 1-b memory.The 2×2 pixel pitch has an area of 40 μm×40 μm and the fill factor is about 16%.While operating at a low frame rate,the sensor dissipates a very low power by power-management circuit making pixel-level comparators in an idle state.A digital correlated double sampling,which eliminates fixed pattern noise,improves SNR of the sensor, and multiple sampling operations make the sensor have a wide dynamic range.
文摘A practical optical fiber differential pressure sensor is presented at first. Then the techniques of light source feedback, set up of reference channel, proportional measurement and other methods to improve the stability of the system as well as to reduce the interference with same nature are emphatically discussed. Finally, the experiment results of the developed instrument are given.
文摘The ratio measurement by means of the sensing optical fiber and the reference fiber with different beginning positions, and the technique to improve the stability of the sensor are first described. Then the ability to restrain and compensate the interference of the same nature through the double channel ratio measurement is illustrated. Finally, the performance of sensor and its engineering design are discussed.
