Sulfonate groups were introduced to the surfaces of multiwalled carbon nanotubes by the radiation-induced graft polymerization of sodium 4-styrene sulfonate for the use as biosensor supports. Alcohol dehydrogenase was...Sulfonate groups were introduced to the surfaces of multiwalled carbon nanotubes by the radiation-induced graft polymerization of sodium 4-styrene sulfonate for the use as biosensor supports. Alcohol dehydrogenase was immobilized onto a sulfonated nanotube-supporting electrode with tris（2,2＇-bipyridyl） ruthenium（II） complex to form an electrogenerated chemilluminesce sensor of alcohol. When it was used to detect alcohol in cyclic voltammetric measurements, the sensor showed the linearity over the range of 1.0 × 10^-4 M-5.0 ×10^-2 M, with a correlation coefficient of 0.992 and a detection limit of 1.9 ×10^-6 M. In electrogenerated chemilluminesce detection, it showed linearity over 5.0 × 10^-4 M-1.0 × 10^-2 M, with a correlation coefficient of 0.986 and a detection limit of 1.0 × 10^-6 M. The sensor was demonstrated to be able to detect ethanol in commercial drinks.展开更多
Polymer light-emitting electrochemical cells (PLECs) employ a thin layer of a luminescent conjugated polymer admixed with an ionic source and an ionic conductor for the in-situ formation of p-i-n junction and subseque...Polymer light-emitting electrochemical cells (PLECs) employ a thin layer of a luminescent conjugated polymer admixed with an ionic source and an ionic conductor for the in-situ formation of p-i-n junction and subsequent efficient injections of both electrons and holes.The junction formation enables the use of air-stable conductors as the cathode and a relatively thick emissive polymer layer that is more compatible with low-cost solution-based processes.This paper overviews the operation mechanism of the PLECs,the properties and drawbacks of the devices.The employment of crosslinkable ionic conductors to stabilize the p-i-n junction is reviewed.The resulting static junction electroluminesces light at high brightness,high efficiency,and prolonged lifetime.Silver paste and carbon nanotubes can be used as the cathode,thus,PLECs were fabricated by lamination.Using single wall carbon nanotubes coated elastic substrate as both anode and cathode,the PLECs can be made highly stretchable.展开更多
This paper proposes a new mechanism to explain the performance of thin dye-sensitized solar cells （DSSC）. Near-stoichiometric flower-like Cu2ZnSnS4 （CZTS） microspheres with a high specific surface area was fabri- ...This paper proposes a new mechanism to explain the performance of thin dye-sensitized solar cells （DSSC）. Near-stoichiometric flower-like Cu2ZnSnS4 （CZTS） microspheres with a high specific surface area was fabri- cated for use as the photocathode in a DSSC. To improve the extraction and transfer of electrons, graphene was added to the CZTS. A DSSC with a 10-gin TiO2 pho- toanode layer exhibited a slightly degraded efficiency with a CZTS-graphene photocathode, relative to a Pt counter electrode （CE）. Nevertheless, when the thickness of the TiO2 photoanode was reduced to 2 lam, the efficiency of a DSSC with a CZTS-graphene photocathode was greater than that of a Pt-DSSC. It is speculated that, unlike the Pt CE, a CZTS-graphene photocathode not only collects electrons from an external circuit and catalyzes the reduction of the triiodide ions in the electrolyte, but also utilizes unabsorbed photons to produce photo-excited electrons and suppresses charge recombination, thus enhancing the performance of the cell. The use of narrowband gap p-type semiconductors as photocathodes offers a new means of fabricating thin dye-sensitized solar cells and effectively improving the cell performance.展开更多
Due to strong photoluminescence,extraordinary photostability,excellent biocompatibility,and good water-solubility,metal nanoclusters have attracted enormous attention since discovered.They are found to be novel fluore...Due to strong photoluminescence,extraordinary photostability,excellent biocompatibility,and good water-solubility,metal nanoclusters have attracted enormous attention since discovered.They are found to be novel fluorescence labels for biological applications and environmental monitoring.Recently the chemiluminescence(CL) or electrochemiluminescence(ECL) of metal nanoclusters has received increasing attention.This review covers recent vibrant developments in this field of the past 5 years,and highlights different functions of metal nanoclusters in various CL and ECL systems,such as luminophores,catalysts,and quenchers.Latest synthetic methods of metal nanoclusters used in CL or ECL are also summarized.Furthermore,we discuss some perspectives and critical challenges of this field in the near future.展开更多
文摘Sulfonate groups were introduced to the surfaces of multiwalled carbon nanotubes by the radiation-induced graft polymerization of sodium 4-styrene sulfonate for the use as biosensor supports. Alcohol dehydrogenase was immobilized onto a sulfonated nanotube-supporting electrode with tris（2,2＇-bipyridyl） ruthenium（II） complex to form an electrogenerated chemilluminesce sensor of alcohol. When it was used to detect alcohol in cyclic voltammetric measurements, the sensor showed the linearity over the range of 1.0 × 10^-4 M-5.0 ×10^-2 M, with a correlation coefficient of 0.992 and a detection limit of 1.9 ×10^-6 M. In electrogenerated chemilluminesce detection, it showed linearity over 5.0 × 10^-4 M-1.0 × 10^-2 M, with a correlation coefficient of 0.986 and a detection limit of 1.0 × 10^-6 M. The sensor was demonstrated to be able to detect ethanol in commercial drinks.
基金supported by the National Science Foundation (ECCS1028412)
文摘Polymer light-emitting electrochemical cells (PLECs) employ a thin layer of a luminescent conjugated polymer admixed with an ionic source and an ionic conductor for the in-situ formation of p-i-n junction and subsequent efficient injections of both electrons and holes.The junction formation enables the use of air-stable conductors as the cathode and a relatively thick emissive polymer layer that is more compatible with low-cost solution-based processes.This paper overviews the operation mechanism of the PLECs,the properties and drawbacks of the devices.The employment of crosslinkable ionic conductors to stabilize the p-i-n junction is reviewed.The resulting static junction electroluminesces light at high brightness,high efficiency,and prolonged lifetime.Silver paste and carbon nanotubes can be used as the cathode,thus,PLECs were fabricated by lamination.Using single wall carbon nanotubes coated elastic substrate as both anode and cathode,the PLECs can be made highly stretchable.
基金This work was supported by the National Natural Science Foundation of China （51272033, 51572037 and 51335002）, the Priority Academic Program Development of Jiangsu Higher Education Institutions and the Natural Science Foundation of the Jiangsu Higher Education Institutions of China （14KJA430001）.
文摘This paper proposes a new mechanism to explain the performance of thin dye-sensitized solar cells （DSSC）. Near-stoichiometric flower-like Cu2ZnSnS4 （CZTS） microspheres with a high specific surface area was fabri- cated for use as the photocathode in a DSSC. To improve the extraction and transfer of electrons, graphene was added to the CZTS. A DSSC with a 10-gin TiO2 pho- toanode layer exhibited a slightly degraded efficiency with a CZTS-graphene photocathode, relative to a Pt counter electrode （CE）. Nevertheless, when the thickness of the TiO2 photoanode was reduced to 2 lam, the efficiency of a DSSC with a CZTS-graphene photocathode was greater than that of a Pt-DSSC. It is speculated that, unlike the Pt CE, a CZTS-graphene photocathode not only collects electrons from an external circuit and catalyzes the reduction of the triiodide ions in the electrolyte, but also utilizes unabsorbed photons to produce photo-excited electrons and suppresses charge recombination, thus enhancing the performance of the cell. The use of narrowband gap p-type semiconductors as photocathodes offers a new means of fabricating thin dye-sensitized solar cells and effectively improving the cell performance.
基金supported by the National Natural Science Foundation of China(21344008,21475123)the Financial Support by Ministry of Education of Liaoning Province(L2015434)+2 种基金the Scientific Public Welfare Research Foundation of Liaoning Province(2015004016)the doctoral scientific research foundation of Liaoning Province of China (201501077)the Open Funds of the State Key Laboratory of Environmental Chemistry
文摘Due to strong photoluminescence,extraordinary photostability,excellent biocompatibility,and good water-solubility,metal nanoclusters have attracted enormous attention since discovered.They are found to be novel fluorescence labels for biological applications and environmental monitoring.Recently the chemiluminescence(CL) or electrochemiluminescence(ECL) of metal nanoclusters has received increasing attention.This review covers recent vibrant developments in this field of the past 5 years,and highlights different functions of metal nanoclusters in various CL and ECL systems,such as luminophores,catalysts,and quenchers.Latest synthetic methods of metal nanoclusters used in CL or ECL are also summarized.Furthermore,we discuss some perspectives and critical challenges of this field in the near future.
