Highly Sensitive Photodetectors Based on WS_(2) Quantum Dots/GaAs Heterostructures

The performance of the photodetector is significantly impacted by the inherent surface faults in GaAs nanowires(NWs).We combined three-dimensional(3D)gallium arsenide nanowires with zero-dimensional(0D)WS_(2) quantum dot(QDs)materials in a simple and convenient way to form a heterogeneous structure.Various performance enhancements have been realized through the formation of typeⅡenergy bands in heterostructures,opening up new research directions for the future development of photodetector devices.This work successfully fabricated a high-sensitivity photodetector based on WS_(2)QDs/GaAs NWs heterostructure.Under 660 nm laser excitation,the photodetector exhibits a responsivity of 368.07 A/W,a detectivity of 2.7×10^(12)Jones,an external quantum efficiency of 6.47×10^(2)%,a low-noise equivalent power of 2.27×10^(-17)W·Hz^(-1/2),a response time of 0.3 s,and a recovery time of 2.12 s.This study provides a new solution for the preparation of high-performance GaAs detectors and promotes the development of optoelectronic devices for GaAs NWs.

10Gb/s EML Module Based on Identical Epitaxial Layer Scheme

A 10Gb/s transmitter module containing an electroabsorption modulator monolithically integrated with a distributed feedback (DFB) semiconductor laser is fabricated using the identical epitaxial layer scheme.Gain-coupling mechanism is employed to improve the single mode yield of the DFB laser,while inductively coupled plasma dry etching technique is utilized to reduce the modulator capacitance.The integrated device exhibits a threshold current as low as 12mA and an extinction ratio over 15dB at -2V bias.The small signal modulation bandwidth is measured to be over 10GHz.The transmission experiment at 10Gb/s indicates a power penalty less than 1dB at a bit-error-rate of 10 -12 after transmission through 35km single mode fiber.

16-Channel 0.35μm CMOS/VCSEL Transmission Modules

The vertical cavity surface emitting laser (VCSEL) arrays and VCSEL-based optical transmission modules are investigated.It includes the VCSEL's spectral characteristic,modulation characteristic,high frequency characteristic,and compatibility with microelectronic circuit.The module consists of 1×16 VCSEL array and 16-channel lasers driver with 0.35μm CMOS circuit by hybrid integration.During the test process,the module operates well at more than 2GHz in -3dB frequency bandwidth.

Low-Cost, High-Reflectivity Silicon-on-Reflector for Optoelectronic Device Application

A silicon on reflector (SOR) substrate containing a thin crystal silicon layer and a buried Si/SiO 2 Bragg reflector is reported. The substrate, which is applied to optoelectronic devices, is fabricated by using Si based sol gel sticking and smart cut techniques. The reflectivity of the SOR substrate is close to unity at 1 3μm's wavelength under the normal incidence.

Design and Characteristics of InGaAs/GaAs MQW SEED Arrays Structure

The influence of DBR in resonant cavity on the characteristics of the reflectivity of InGaAs/GaAs MQW SEED arrays has been discussed. InGaAs/GaAs acting as the active region of MQW SEED to gain 980nm work wavelergth has been introduced. A new resonant cavity structure of the InGaAs/GaAs MQW SEED arrays has been designed and analyzed. The MQW materials grown by MOCVD system have also been measured and analyzed with micro optical spot reflection spectra, PL measurement and X ray measurement. The results of measurement prove the good quality of the wafer and the accuracy of our design and analysis of the structure of the device.

1.55μm Laser Diode Monolithically Integrated with Spot-Size Converter Using Conventional Process

A novel 1 55μm laser diode with spot size converter is designed and fabricated using conventional photolithography and chemical wet etching process.For the laser diode,a ridge double core structure is employed.For the spot size converter,a buried ridge double core structure is incorporated.The laterally tapered active core is designed and optically combined with the thin and wide passive core to control the size of mode.The laser diode threshold current is measured to be 40mA together with high slop efficiency of 0 35W/A.The beam divergence angles in the horizontal and vertical directions are as small as 14 89°×18 18°,respectively,resulting in low coupling losses with a cleaved optical fiber (3dB loss).

Electron Injection Enhancement by Diamond-Like Carbon Film in Polymer Electroluminescence Devices

A diamond-like carbon （DLC） film is deposited as an electron injection layer between the polymer light-emitting layer（MEH-PPV） and aluminum （Al） cathode electrode in polymer electroluminescence devices （PLEDs） using a radio frequency plasma deposition system. The source material of the DLC is n-butylamine. The devices consist of indium tin oxide （ITO）/MEH-PPV/DLC/Al. Electron injection properties are investigated through I-V characteristics,and the mechanism of electron injection enhancement due to a thin DLC layer has been studied. It is found that： （1） a DLC layer thinner than 1.0nm leads to a higher turn-on voltage and decreased electroluminescent （EL） efficiency; （2） a 5.0nm DLC layer significantly enhances the electron injection and results in the lowest turn-on voltage and the highest EL efficiency; （3） DLC layer that exceeds 5.0nm results in poor device performance;and（4） EL emission can hardly be detected when the layer exceeds 10.0nm. The properties of ITO/MEH-PPV/DLC/Al and ITO/MEH-PPV/LiF/Al are investigated comparatively.

Monolithically Integrated Laser Diode and Electroabsorption Modulator with Dual-Waveguide Spot-Size Converter Output

A 1.60μm laser diode and electroabsorption modulator monolithically integrated with a novel dual-waveguide spot-size converter output for low-loss coupling to a cleaved single-mode optical fiber are demonstrated.The devices emit in a single transverse and quasi single longitudinal mode with an SMSR of 25.6dB.These devices exhibit a 3dB modulation bandwidth of 15.0GHz,and modulator DC extinction ratios of 16.2dB.The output beam divergence angles of the spot-size converter in the horizontal and vertical directions are as small as 7.3°×18.0°,respectively,resulting in a 3.0dB coupling loss with a cleaved single-mode optical fiber.

A Wavelength Tunable DBR Laser Integrated with an Electro-Absorption Modulator by a Combined Method of SAG and QWI

We report a wavelength tunable electro-absorption modulated DBR laser based on a combined method of SAG and QWI. The threshold current is 37mA and the output power at 100mA gain current is 3.5mW. When coupled to a single-mode fiber with a coupling efficiency of 15% ,more than a 20dB extinction ratio is observed over the change of EAM bias from 0 to -2V. The 4.4nm continuous wavelength tuning range covers 6 channels on a 100GHz grid for WDM telecommunications.

A 1.25Gb/s InP-Based Vertical Monolithic Integration of an MQW Laser Diode and an HBT Driver witha Lateral Buffer Mes a Structure

A novel fabrication process related to a smoothly wet chemical etching profile o f InP-based epitaxial layers in the crystal direction of [01for an InP-based monol ithic vertically integrated transmitter with an MQW laser diode and a heterojunction bipolar tran sistors driver circuit is described.A clear eye output diagram via an O/E converter is demonstrat ed und er a 1.25Gb/s non-return-zero pseudorandom code with a pattern length of 2 the integrated transmitter has a power dissipation of about 120mW with an optical output of 2dBm.

Optimization of InGaAs Quantum Dots for Optoelectronic Applications

Self-assembled In 0.35Ga 0.65As/GaAs quantum dots with low indium content are grown under different growth temperature and investigated using contact atomic force microscopy(AFM).In order to obtain high density and high uniformity of quantum dots,optimized conditions are concluded for MBE growth.Optimized growth conditions also compared with these of InAs/GaAs quantum dots.This will be very useful for InGaAs/GaAs QDs optoelectronic applications,such as quantum dots lasers and quantum dots infrared photodetectors.

A High-Performance Silicon Electro-Optic Phase Modulator with a Triple MOS Capacitor

We propose and analyze a novel Si-based electro-optic modulator with an improved metal-oxide-semiconductor （MOS） capacitor configuration integrated into silicon-on-insulator （SOl）. Three gate-oxide layers embedded in the silicon waveguide constitute a triple MOS capacitor structure, which boosts the modulation efficiency compared with a single MOS capacitor. The simulation results demonstrate that the Vπ Lπ product is 2. 4V · cm. The rise time and fall time of the proposed device are calculated to be 80 and 40ps from the transient response curve, respectively,indicating a bandwidth of 8GHz. The phase shift efficiency and bandwidth can be enhanced by rib width scaling.

Optimum design of a polymer electro-optic microring resonator switch

Novel transfer functions are presented for a polymer electro-optic mieroring resonator switches. The resonating process ot the light in the microring is simulated using the formulas. Then the optimization of the structural parameters is performed, and the characteristics are analyzed, such as the resonance time, output spectrum, operation voltage, insertion loss and crosstalk were analyzed. The simulation results show that the designed device exhibits favorable switching functions.

Novel Design of HID Lamp Electronic Ballast for Automotive Systems

This paper presents a high intensity discharge（HID） lamp for automotive illumination. A novel type of ballast for HID is proposed without an acoustic resonance. The system consists of high frequency DC/DC converter,DC/AC inverter（SLA2403M）, high voltage igniter and a microcontroller unit（MCU）. The proposed ballast controls the complex start-up process and constant power process by programming on the rnicrocontroller. It is verified that experimental results agree well with the calculated ones. The ballast features such functions as failure protection, line under-voltage, line over-voltage, output short circuit and disconnection protections.

Free electron laser based on the Smith-Purcell radiation

A Smith-Purcell （SP） free electron laser （FEL） ,composed of a metallic diffraction flat grating,an open cylindrical mirror cavity and a relativistic sheet electron beam with moderate energy, is presented. The characteristics of this device are studied by theoretical analysis,experimental measurements and particle-in-cell （PIO） simulation method. Results indicate that the coherent radiation with an output peak power up to 50 MW at millimeter wavelengths can be generated by using relativistic electron beam of moderate energy.

Fully differential optoelectronic integrated receiver implemented by 0.35μm standard CMOS process

A high-bandwidth, high-sensitivity fully differential optoelectronic integrated receiver is implemented in a chartered 3.3 V standard 0.35μm analbg CMOS process. To convert the incident light into a pair of fully differential photo-currents, a novel fully differential photodetector is proposed, which is composed of two completely identical photodiodes. The mea- surement results show that the receiver achieves a 1.11 GHz 3 dB bandwidth and a -13 dBm sensitivity for a 10-12 bit error at 1.5 Gb/s data rate under illumination by 850 nm incident lights.

Redox Controllable Switch of Crystalline Phase and Physical Property in SrVO_x Epitaxial Films

Transition-metal oxides have attracted much attention due to its abundant crystalline phases and intriguing physical properties. However, some of these compounds are difficult to be fabricated directly in film form due to the ease of valence variation of transition-metal elements.In this work, we reveal the reversible structural transition between SrVO3 and Sr2V2O7 films via thermal treatment in oxygen atmosphere or in vacuum. Based on this, Sr2V2O7 epitaxial films are successfully synthesized and studied. Property characterizations show that the semitransparent and metallic SrVO3 could reversibly switch into transparent and insulating Sr2V2O7, implying potential applications in controllable electronic and optical devices.

Photoluminescence Properties of Si_(1-x)Ge_x/Si Strained Layer Structures

The investigation on optical properties of Si1-xGex/Si strained layer structures has been carried out actively in recent years. The photoluminescence has become a brisker subject in the studies of its various optical properties. A research development on photoluminescence properties of some new Si1-x Gex/Si strained layer structures is introduced.

Special Photoconverter

A special device with photocurrent amplification function is reported. The device with long base region structure consists of dual route photodetectors and their amplifier. Two photodetectors with a space of 50 μm are precisely located in this device. The device with current sensitivity of S ≥15 A/lm,static state current transmission coefficient of h FE ≥5 000, single route dark current of I D≥1 μA, high frequency current transmission coefficient modulus of | h fe |≥1 at 400 MHz is obtained. At present, the device has been tried out in

Simulating Experiment and Circuit Simulation of RTD/HPT Photo-Controlled MOBILE

The MOBILE is a logic element realizing the monostable-bistable transition of a circuit that consists of two resonant tunneling transistors—the resonant tunneling diodes (RTDs) connected in series. It has several advantages including multiple inputs and multiple functions. In this paper, by connecting a heterojunction phototransistor (HPT) with the MOBILE, a novel optoelectronic functional device can be got, which presents the function of both photocurrent switching and photocurrent latching. These behaviors have been demonstrated for the first time by simulating experiments and circuit simulations, with RTDs firstly manufactured in China. Research indicates that the novel photo-controlled MOBILE has the same logic functions as conventional electrical MOBILE except for with light as an input signal.