Two kinds of monolithically fabricated circuits are demonstrated in GaAs-based material systems using resonant tunneling diodes(RTD) and metal-semiconductor-metal photo detectors(MSM PD). The electronic characteri...Two kinds of monolithically fabricated circuits are demonstrated in GaAs-based material systems using resonant tunneling diodes(RTD) and metal-semiconductor-metal photo detectors(MSM PD). The electronic characteristics of these fabricated RTD devices,MSM devices,and integrated circuits are tested at room temperature. The results show that the current peak-to-valley ratio is 4,and the photocurrent at 5V is enhanced by a factor of nearly 9,from 2 to about 18μA by use of recessed electrodes. The working theory and logical functions of the circuits are validated.展开更多
The theoretical spectral response formula of the N+-N-I-P+ silicon photodetector with high/low emission junction is given. At the same time, considering the process requirements, the optimum structure parameters of si...The theoretical spectral response formula of the N+-N-I-P+ silicon photodetector with high/low emission junction is given. At the same time, considering the process requirements, the optimum structure parameters of silicon photodetector are obtained by numerical calculation and simulation. Under the condition of these optimum structure parameters, the responsivity of the silicon photodetector will be 0.48 A/W at 650 nm.展开更多
The transmission delay of photogenerated carriers in a CMOS-process-compatible double photodiode (DPD) is analyzed by using device simulation.The DPD small signal equivalent circuit model which includes transmission d...The transmission delay of photogenerated carriers in a CMOS-process-compatible double photodiode (DPD) is analyzed by using device simulation.The DPD small signal equivalent circuit model which includes transmission delay of photogenerated carriers is given.From analysis on the frequency domain of the circuit model the device has two poles.One has the relationship with junction capacitance and the DPD’s load,the other with the depth and the doping concentration of the N-well in the DPD.Different depth of the N-well and different area of the DPDs with bandwidth were compared.The analysis results are important to design the high speed DPDs.展开更多
This paper proposes the financial index of payback period analysis in order to evaluate the economic performance of lighting system. Conventional designs and proposed optimal design using the Energy Conversation Promo...This paper proposes the financial index of payback period analysis in order to evaluate the economic performance of lighting system. Conventional designs and proposed optimal design using the Energy Conversation Promotion Act (No. 2) B.E. 2550 of Ministry of Energy (Section--The Type or Size of Building Standards and Rules and Procedures, Building Design for Energy Conservation, Act B.E. 2552) are compared based on illumination standard for office building in term of energy consumption, return of investment and environmental impact. Firstly, the Type or Size of Building Standards and Rule and Procedures, Building Design for Energy Conservation, Act B.E. 2552 is reviewed and compared with the conventional designs of lighting system for office building. Next, the lifetime energy consumption of fluorescent lamp T5 with electronic ballast, fluorescent lamp T8 with standard ballast and fluorescent lamp T8 with electronic ballast are simulated using DIALux software program in three sizes office buildings. Then, the payback period and CO2 emission of lighting system for selected office building are simulated by various scenarios, which the analytical results show are the optimal lighting system for office building under the present situation. Finally, the optimal design of lighting system for designated office building in Thailand will be discussed with respect to the energy performance with environmental friendly.展开更多
文摘Two kinds of monolithically fabricated circuits are demonstrated in GaAs-based material systems using resonant tunneling diodes(RTD) and metal-semiconductor-metal photo detectors(MSM PD). The electronic characteristics of these fabricated RTD devices,MSM devices,and integrated circuits are tested at room temperature. The results show that the current peak-to-valley ratio is 4,and the photocurrent at 5V is enhanced by a factor of nearly 9,from 2 to about 18μA by use of recessed electrodes. The working theory and logical functions of the circuits are validated.
文摘The theoretical spectral response formula of the N+-N-I-P+ silicon photodetector with high/low emission junction is given. At the same time, considering the process requirements, the optimum structure parameters of silicon photodetector are obtained by numerical calculation and simulation. Under the condition of these optimum structure parameters, the responsivity of the silicon photodetector will be 0.48 A/W at 650 nm.
文摘The transmission delay of photogenerated carriers in a CMOS-process-compatible double photodiode (DPD) is analyzed by using device simulation.The DPD small signal equivalent circuit model which includes transmission delay of photogenerated carriers is given.From analysis on the frequency domain of the circuit model the device has two poles.One has the relationship with junction capacitance and the DPD’s load,the other with the depth and the doping concentration of the N-well in the DPD.Different depth of the N-well and different area of the DPDs with bandwidth were compared.The analysis results are important to design the high speed DPDs.
文摘This paper proposes the financial index of payback period analysis in order to evaluate the economic performance of lighting system. Conventional designs and proposed optimal design using the Energy Conversation Promotion Act (No. 2) B.E. 2550 of Ministry of Energy (Section--The Type or Size of Building Standards and Rules and Procedures, Building Design for Energy Conservation, Act B.E. 2552) are compared based on illumination standard for office building in term of energy consumption, return of investment and environmental impact. Firstly, the Type or Size of Building Standards and Rule and Procedures, Building Design for Energy Conservation, Act B.E. 2552 is reviewed and compared with the conventional designs of lighting system for office building. Next, the lifetime energy consumption of fluorescent lamp T5 with electronic ballast, fluorescent lamp T8 with standard ballast and fluorescent lamp T8 with electronic ballast are simulated using DIALux software program in three sizes office buildings. Then, the payback period and CO2 emission of lighting system for selected office building are simulated by various scenarios, which the analytical results show are the optimal lighting system for office building under the present situation. Finally, the optimal design of lighting system for designated office building in Thailand will be discussed with respect to the energy performance with environmental friendly.