The special character of a PCF which is used as a gas or liquid sensor is discussed. The field distribution is analyzed when the solid core PCF is injected with different medium that has different relative dielectric ...The special character of a PCF which is used as a gas or liquid sensor is discussed. The field distribution is analyzed when the solid core PCF is injected with different medium that has different relative dielectric constant （or refractive index）. And the experiential formulas of the relation between refractive index of some kinds of liquid and their concentration are given, in order to measure the concentration of the relative liquid. At the same time, the effect of propagation constant on PCF sensor character is also discussed. Furthermore, the photonic medium relative dielectric constant, when it is injected with . band-gap （PBG） of PCF （PBG-PCF） is calculated at different different medium. That is the principle basis for this kind of PCF sensors.展开更多
Theoretically and experimentally, the effects of temperature on the weak principal axis of twisted optical fiber loop are analyzed, and the results show that the location of the pair of weak principal axis will drift ...Theoretically and experimentally, the effects of temperature on the weak principal axis of twisted optical fiber loop are analyzed, and the results show that the location of the pair of weak principal axis will drift with temperature change, which will deteriorate the stability of system when applied to sensor system. In this paper, the influence of phase drift of weak principal axis on the performance of optical fiber current sensor is mainly predicted theoretically. Our research results will provide a beneficial reference for improving optical fiber sensor system.展开更多
Abstract: The current measuring principle, the hardware structure and the software functions of a high voltage breaker current monitoring and fault diagnosis system are introduced. A simple algorithm for calculating t...Abstract: The current measuring principle, the hardware structure and the software functions of a high voltage breaker current monitoring and fault diagnosis system are introduced. A simple algorithm for calculating the current effective value is given. The cut - off characteristics of the breaker are classified. This system can provide a foundation for reasonably determining the breaker service period.展开更多
Based on the theory of thermal radiation,a contact type optical fiber pyrometer applied in IC engine is put forward.It is composed of three parts:a blackbody probe,optical system,electrical process system.The key tech...Based on the theory of thermal radiation,a contact type optical fiber pyrometer applied in IC engine is put forward.It is composed of three parts:a blackbody probe,optical system,electrical process system.The key technology of design is discussed.Experiment is given to prove that the pyrometer has much higher responsive speed,distinguishability and much longer running life than other pyrometers.展开更多
A practical optical fiber differential pressure sensor is presented at first. Then the techniques of light source feedback, set up of reference channel, proportional measurement and other methods to improve the stabil...A practical optical fiber differential pressure sensor is presented at first. Then the techniques of light source feedback, set up of reference channel, proportional measurement and other methods to improve the stability of the system as well as to reduce the interference with same nature are emphatically discussed. Finally, the experiment results of the developed instrument are given.展开更多
The ratio measurement by means of the sensing optical fiber and the reference fiber with different beginning positions, and the technique to improve the stability of the sensor are first described. Then the ability to...The ratio measurement by means of the sensing optical fiber and the reference fiber with different beginning positions, and the technique to improve the stability of the sensor are first described. Then the ability to restrain and compensate the interference of the same nature through the double channel ratio measurement is illustrated. Finally, the performance of sensor and its engineering design are discussed.展开更多
On the basis of analysis on the temperature monitoring methods for high voltage devices, a new type of fiber optic sensor structure with reference channel is given. And the operation principle of fiber optic sensor is...On the basis of analysis on the temperature monitoring methods for high voltage devices, a new type of fiber optic sensor structure with reference channel is given. And the operation principle of fiber optic sensor is analysed at large based on the absorption of semiconductor chip. The mathematical model of both devices and the whole system are also given. It is proved by the experiment that this mathematical model is reliable.展开更多
The paper has presented the impact on the line protection performance with the introduction of MUs （merging units） in the process bus level. The paper begins with the introduction on modem digital substation structu...The paper has presented the impact on the line protection performance with the introduction of MUs （merging units） in the process bus level. The paper begins with the introduction on modem digital substation structure and process bus. Then, the paper describes the performances of different sensors such as CTs （current transformers）, CVTs （capacitive voltage transformers）, FOCS （fiber optical current transducers） and FOVS （fiber optical voltage transducers）. With the use of above transducers together with MUs, the performance of distance protection function and line differential protection function have been investigated and presented. Finally, conclusions based on the study are presented in the paper.展开更多
The paper systematically describes the theoretical research on Cerenkov effect of REB in optical fibres. The analytical expressions for light generation ,collection efficiency ,electron incident angle .the Cerenkov ra...The paper systematically describes the theoretical research on Cerenkov effect of REB in optical fibres. The analytical expressions for light generation ,collection efficiency ,electron incident angle .the Cerenkov radiation sensitivity of the optical fibre to the current density of the REB stream.and the response of the sensitivity to both electron energy and electron incident angles are given. The typical sensor system for REB measurement is presented. The dynamic range and bandwidth are quantitatively analyzed. The calculation results are illustrated,展开更多
This paper presents the testing results of three types of fire detectors： electrical heat sensing cable, optical fiber Raman temperature sensing detector, and optical fiber Bragg grating （FBG） temperature sensing d...This paper presents the testing results of three types of fire detectors： electrical heat sensing cable, optical fiber Raman temperature sensing detector, and optical fiber Bragg grating （FBG） temperature sensing detector, in two simulated fire scenes in a cable tunnel. In the small-scale fire with limited thermal radiation and no flame, the fire alarm only comes from the heat sensors which directly contact with the heat source. In the large-scale fire with about 5 ℃/min temperature rising speed within a 3-m span, the fire alarm response time of the fiber Raman sensor and FBG sensors was about 30 seconds. The test results can be further used for formulating regulation for early fire detection in cable tunnels.展开更多
In this paper, a partial discharge detection system is proposed using an optical fiber Fabry-Perot(FP) interferometric sensor, which is fabricated by photolithography. SU-8 photoresist is employed due to its low Young...In this paper, a partial discharge detection system is proposed using an optical fiber Fabry-Perot(FP) interferometric sensor, which is fabricated by photolithography. SU-8 photoresist is employed due to its low Young's modulus and potentially high sensitivity for ultrasound detection. The FP cavity is formed by coating the fiber end face with two layers of SU-8 so that the cavity can be controlled by the thickness of the middle layer of SU-8. Static pressure measurement experiments are done to estimate the sensing performance. The results show that the SU-8 based sensor has a sensitivity of 154.8 nm/kP a, which is much higher than that of silica based sensor under the same condition. Moreover, the sensor is demonstrated successfully to detect ultrasound from electrode discharge.展开更多
The power transformer is the most important equipment of the high voltage power grid, however, some traditional methods of online partial discharge monitoring have some limitations. Based on many advantages of the opt...The power transformer is the most important equipment of the high voltage power grid, however, some traditional methods of online partial discharge monitoring have some limitations. Based on many advantages of the optical fiber sensing technology, we have done some research on fiber optics Fabry-Perot （FP） sensing which can be useful for the transformer on online partial discharge monitoring. This research aimed at improving the reliability of power system safety monitoring. We have done some work as follows： designing a set for fiber optics FP sensor preparation, according to the fabrication procedure strictly making out the sensors, building a reasonable signal demodulation system for fiber optics FP sensing, doing a preliminary analysis about online partial discharge signal monitoring, including the research on different discharge intensities with the same measuring distance and different measuring distances with the same discharge intensity, and then making a detailed analysis of the experimental results.展开更多
文摘The special character of a PCF which is used as a gas or liquid sensor is discussed. The field distribution is analyzed when the solid core PCF is injected with different medium that has different relative dielectric constant （or refractive index）. And the experiential formulas of the relation between refractive index of some kinds of liquid and their concentration are given, in order to measure the concentration of the relative liquid. At the same time, the effect of propagation constant on PCF sensor character is also discussed. Furthermore, the photonic medium relative dielectric constant, when it is injected with . band-gap （PBG） of PCF （PBG-PCF） is calculated at different different medium. That is the principle basis for this kind of PCF sensors.
文摘Theoretically and experimentally, the effects of temperature on the weak principal axis of twisted optical fiber loop are analyzed, and the results show that the location of the pair of weak principal axis will drift with temperature change, which will deteriorate the stability of system when applied to sensor system. In this paper, the influence of phase drift of weak principal axis on the performance of optical fiber current sensor is mainly predicted theoretically. Our research results will provide a beneficial reference for improving optical fiber sensor system.
文摘Abstract: The current measuring principle, the hardware structure and the software functions of a high voltage breaker current monitoring and fault diagnosis system are introduced. A simple algorithm for calculating the current effective value is given. The cut - off characteristics of the breaker are classified. This system can provide a foundation for reasonably determining the breaker service period.
文摘Based on the theory of thermal radiation,a contact type optical fiber pyrometer applied in IC engine is put forward.It is composed of three parts:a blackbody probe,optical system,electrical process system.The key technology of design is discussed.Experiment is given to prove that the pyrometer has much higher responsive speed,distinguishability and much longer running life than other pyrometers.
文摘A practical optical fiber differential pressure sensor is presented at first. Then the techniques of light source feedback, set up of reference channel, proportional measurement and other methods to improve the stability of the system as well as to reduce the interference with same nature are emphatically discussed. Finally, the experiment results of the developed instrument are given.
文摘The ratio measurement by means of the sensing optical fiber and the reference fiber with different beginning positions, and the technique to improve the stability of the sensor are first described. Then the ability to restrain and compensate the interference of the same nature through the double channel ratio measurement is illustrated. Finally, the performance of sensor and its engineering design are discussed.
文摘On the basis of analysis on the temperature monitoring methods for high voltage devices, a new type of fiber optic sensor structure with reference channel is given. And the operation principle of fiber optic sensor is analysed at large based on the absorption of semiconductor chip. The mathematical model of both devices and the whole system are also given. It is proved by the experiment that this mathematical model is reliable.
文摘The paper has presented the impact on the line protection performance with the introduction of MUs （merging units） in the process bus level. The paper begins with the introduction on modem digital substation structure and process bus. Then, the paper describes the performances of different sensors such as CTs （current transformers）, CVTs （capacitive voltage transformers）, FOCS （fiber optical current transducers） and FOVS （fiber optical voltage transducers）. With the use of above transducers together with MUs, the performance of distance protection function and line differential protection function have been investigated and presented. Finally, conclusions based on the study are presented in the paper.
文摘The paper systematically describes the theoretical research on Cerenkov effect of REB in optical fibres. The analytical expressions for light generation ,collection efficiency ,electron incident angle .the Cerenkov radiation sensitivity of the optical fibre to the current density of the REB stream.and the response of the sensitivity to both electron energy and electron incident angles are given. The typical sensor system for REB measurement is presented. The dynamic range and bandwidth are quantitatively analyzed. The calculation results are illustrated,
基金This work was supported by the Chinese National Science Foundation under Grant 51275373 and the Chinese Fundamental Research Funds for the Central University under Grant 2012-IV -019.
文摘This paper presents the testing results of three types of fire detectors： electrical heat sensing cable, optical fiber Raman temperature sensing detector, and optical fiber Bragg grating （FBG） temperature sensing detector, in two simulated fire scenes in a cable tunnel. In the small-scale fire with limited thermal radiation and no flame, the fire alarm only comes from the heat sensors which directly contact with the heat source. In the large-scale fire with about 5 ℃/min temperature rising speed within a 3-m span, the fire alarm response time of the fiber Raman sensor and FBG sensors was about 30 seconds. The test results can be further used for formulating regulation for early fire detection in cable tunnels.
基金supported by the National Basic Research Program of China(No.2012CB723405)the Science and Technology Commission of Shanghai Municipality(Nos.13510500300,14DZ1201403 and 14511105602)
文摘In this paper, a partial discharge detection system is proposed using an optical fiber Fabry-Perot(FP) interferometric sensor, which is fabricated by photolithography. SU-8 photoresist is employed due to its low Young's modulus and potentially high sensitivity for ultrasound detection. The FP cavity is formed by coating the fiber end face with two layers of SU-8 so that the cavity can be controlled by the thickness of the middle layer of SU-8. Static pressure measurement experiments are done to estimate the sensing performance. The results show that the SU-8 based sensor has a sensitivity of 154.8 nm/kP a, which is much higher than that of silica based sensor under the same condition. Moreover, the sensor is demonstrated successfully to detect ultrasound from electrode discharge.
基金This work was supported by the National Natural Science Foundation of China （Grant No. 51275373） and the Key Project of National Natural Science Foundation of China （Grant No. 50830230）.
文摘The power transformer is the most important equipment of the high voltage power grid, however, some traditional methods of online partial discharge monitoring have some limitations. Based on many advantages of the optical fiber sensing technology, we have done some research on fiber optics Fabry-Perot （FP） sensing which can be useful for the transformer on online partial discharge monitoring. This research aimed at improving the reliability of power system safety monitoring. We have done some work as follows： designing a set for fiber optics FP sensor preparation, according to the fabrication procedure strictly making out the sensors, building a reasonable signal demodulation system for fiber optics FP sensing, doing a preliminary analysis about online partial discharge signal monitoring, including the research on different discharge intensities with the same measuring distance and different measuring distances with the same discharge intensity, and then making a detailed analysis of the experimental results.
