硅基波导光栅耦合器件的测试与分析

本文利用光纤-波导测试系统对微纳光子器件-亚波长光栅耦合器和波导进行测试;该测试系统具有50nm的调节精度,x、y和z三方向六轴自由度,并且能够控制信号光的入射角度;该系统包括:可调谐激光器、偏振控制器、拉锥光纤、微动调整平台、显微系统、红外相机和光功率计等;通过手动微调和精确对位,能够对微纳器件的耦合效率和插入损耗等性能进行测试;硅基波导光栅耦合器件的测试与分析对微纳光电子器件的设计具有一定的指导意义,能够广泛应用于光通信和光信息处理领域。

INFORMATION FUSION TECHNOLOGY FOR FSINS/DR/BEIDOU DOUBLE-STAR IN LAND FIGHTING-VEHICLE

The fiber strapdown inertial navigation system （FSINS）/dead reckoning （DR）/Beidou double-star integrated navigation scheme is proposed aiming at the need of land fighting-vehicle independence positioning. The measurement information fusion technology is studied by introducing the FSINS/DR/Beidou double-star integrated scheme. Several specific methods for the information fusion are discussed, and a Kalman filter is designed for the information fusion. Experimental results show that the design of the integrated scheme can improve the positioning accuracy of the navigation system.

A High-Efficiency Fiber-to-Waveguide Coupler with Low Polarization Dependence Using a Diluted Waveguide in InP Substrate with a 1.55μm Wavelength

We propose a fiber-to-waveguide coupler for side-illuminated p-i-n photodiodes to obtain high responsivity and low polarization dependence that is grown on InP substrate and is suitable for surface hybrid integration in low cost modules. The fiber-to-waveguide coupler is based on a diluted waveguide,which is composed of ten periods of undoped 120nm InP/80nm InGaAsP （1.05μm bandgap） multiple layers. Using the semi-vectorial three dimensional beam propagation method （BPM） with the central difference scheme,the coupling efficiency of fiber-to-waveguide under different conditions is simulated and studied,and the optimized conditions for fiber-to-waveguide coupling are obtained. For TE-like and TM-like modes,the calculated maximum coupling efficiency is higher than 94% and 92% ,respectively. The calculated polarization dependence is less than 0. ldB,showing good polarization independence.

Invited Paper: The Audacity of Fiber-Wireless(FiWi) Networks: Revisited for Clouds and Cloudlets

There is a growing awareness among industry players of reaping the benefits of mobile-cloud convergence by extending today's unmodified cloud to a decentralized two-level cloud-cloudlet architecture based on emerging mobile-edge computing(MEC) capabilities. In light of future 5G mobile networks moving toward decentralization based on cloudlets, intelligent base stations, and MEC, the inherent distributed processing and storage capabilities of radio-and-fiber(R&F) networks may be exploited for new applications, e.g., cognitive assistance, augmented reality, or cloud robotics. In this paper, we first revisit fiber-wireless(Fi Wi) networks in the context of conventional clouds and emerging cloudlets, thereby highlighting the limitations of conventional radio-overfiber(Ro F) networks such as China Mobile's centralized cloud radio access network(C-RAN) to meet the aforementioned trends. Furthermore, we pay close attention to the specific design challenges of data center networks and revisit our switchless arrayedwaveguide grating(AWG) based network with efficient support of east-west flows and enhanced scalability.

Progress of Si-based Optoelectronic Devices

Si-based optoelectronics is becoming a very active research area due to its potential applications to optical communications.One of the major goals of this study is to realize all-Si optoelectronic integrated circuit.This is due to the fact that Si-based optoelectronic technology can be compatible with Si microelectronic technology.If Si-based optoelectronic devices and integrated circuits can be achieved,it will lead to a new informational technological revolution.In the article,the current developments of this exciting field are mainly reviewed in the recent years.The involved contents are the realization of various Si-based optoelectronic devices,such as light-emitting diodes,optical waveguides devices,Si photonic bandgap crystals,and Si laser,etc.Finally,the developed tendency of all-Si optoelectronic integrated technology are predicted in the near future.

Triplexers Based on SOI Flattop AWGs

Triplexers are designed based on SOl flattop arrayed waveguide gratings （AWGs）. Three wavelengths （1310, 1490,and 1550nm） operate at three diffraction orders of AWGs. Simulation shows that the 3dB bandwidth,crosstalk, and loss are 6nm,less than -40dB, and 5dB, respectively. The output optical fields of the device fabricated in our laboratory are clear and show a good triplexing function.

AN OPTICAL FIBER SENSOR TECHNIQUE BASED ON SLIGHT DISTURBANCE RADIATION LOSS OF STOCHASTIC WALL

This paper presents an optical sensor technique used in the damage evaluation which is formed by structurally integrated fiber optic reticulate sensors embedded in the composite materials. The fibers are processed by chemical method and their outsides are peeled to form particles of irregular distribution and they differ in size, so the slight disturbance range of stochastic wall are formed in fibers. According to the characteristics of power loss of waveguide mode caused by slight disturbance of stochastic wall and radiative mode transmission, the range of slight disturbance of stochastic wall may be served as the sensitive range of the sensor. On the basis of theory of slight disturbance of stochastic wall of planar optical waveguide, the relation between the corrosion time and the opposite power loss by experiments is investigated. In this paper, the measurement results of object of SIFORS are also presented. The results show that the optical sensor technique may be used in the damage evaluation of an aircraft.

Automated visual position detection and adjustment for optical waveguide chips and optical fiber arrays

The alignment coupling between optical waveguide chips and optical fiber arrays is the basis of the alignment coupling of planar optical waveguide devices, and the precise position detection with angle and spacing adjustments is one of the key steps of alignment coupling. A methodology for position detection, and angle and spacing adjustment was proposed for optical waveguide chips and optical fiber arrays based on machine vision. The experimental results show angle detection precision levels higher than 0.05°, line detection precision levels higher than 0.1 μm, and detection time less than 2 s. Therefore, the system developed herein meets the precise requirements necessary for position detection, and angle and spacing adjustments for optical waveguide chips and optical fiber arrays.

Realization of Tapered Waveguide by Stretching the Rod Waveguide

By stretching the rod waveguide with different velocities in opposite directions,the tapered waveguide can be fabricated.In condition of taking no account of volume expansion caused by heating and under the assumptions of volume conservation,the rod waveguide can be stretched freely in the heated region without being stretched outside of the heated region. A model,which shows the relation of the transition shape and the two factors,that is the ratio of two velocity and the heated region length,is presented for the shape of the taper transition through mathematic deduction.Based on this model,a desired tapered waveguide can be fabricated.The tapered waveguide are widely used for fabricating tapered fiber couplers and sensors.In addition,the conclusion can be used for fabricating fused fiber coupler.

Progress in Terahertz Waveguides

This paper summarizes the recent progress in Terahertz(THz) waveguides. Many THz waveguides of various sorts have been presented and examined, including dielectric THz waveguides, metal THz waveguides, THz fiber and photonic crystal THz waveguides. Their advantages and limitations are stated, and the perspective of research on Terahertz waveguides is discussed.

Propagation of Solitary Pulses in Optical Fibers with Both Self-Steepening and Quintic Nonlinear Effects

Pulse dynamics and stability in optical fibers in the presence of both self-steepening and quintic nonlinear effects are analyzed. Propagating profiles of the quintic derivative nonlinear Schr¨odinger model are isolated via two invariants of motion. The resulting canonical equation admits exact periodic propagating patterns in terms of the Jacobi elliptic functions, and solitary pulses are recovered in the long wave limit, i.e. degenerate cases of periodic profiles where each pulse is widely separated from the adjacent ones. Two families of such exact wave profiles are identified. The first one has a precise constraint concerning the magnitude of self-steepening and quintic nonlinear effects, while the second one permits more freedom. The reduction to the well established temporal soliton in an optical fiber waveguide in the absence of self-steepening and quintic nonlinearity is demonstrated explicitly. Numerical simulations are performed to identify regimes of parameter values where robust propagation patterns exist.