TM564 96021279 Ge<sub>x</sub>Si<sub>1-x</sub>/Si异质结无间距定向耦合光开关模型分析=Modeling analysis of the Ge<sub>x</sub>Si<sub>1-x</sub>/Si heterojunctionzero-gap dire...TM564 96021279 Ge<sub>x</sub>Si<sub>1-x</sub>/Si异质结无间距定向耦合光开关模型分析=Modeling analysis of the Ge<sub>x</sub>Si<sub>1-x</sub>/Si heterojunctionzero-gap directional couplerswitch[刊,中]/赵策洲,刘恩科,李国正（西安交通大学电子工程系。陕西,西安（710049））∥光学学报。一1995,15（2）。—243—247 提出一种简便可行的Ge<sub>x</sub>Si<sub>1-x</sub>异质结无间距定向耦合光开关模型分析方法。该方法采用等离子体色散效应分析了这种光开关的电学调制机理;采用异质结超注原理分析了开关的电学性质;并根据经典单脊形导理论和上述分析,设计了利用双模干涉机制工作的Ge<sub>0.05</sub>Si<sub>0.95</sub>展开更多
A polymer directional coupler （DC） electro-optic switch with push-pull electrodes and rib waveguides is designed based on the conformal transforming method, image method, coupled mode theory, and electro-optic modul...A polymer directional coupler （DC） electro-optic switch with push-pull electrodes and rib waveguides is designed based on the conformal transforming method, image method, coupled mode theory, and electro-optic modulation theory. Its structure and principle are described, the design and optimization are performed, and the characteristics are analyzed, including the coupling length, switching voltage, output power, insertion loss, and crosstalk. To realize normal switching function,the fabrication tolerance,wavelength shift, and coupling loss between a single mode fiber （SMF） and the waveguide are discussed. Simulation results show that the coupling length is 3082μm; the push-pull switching voltage is 2.14V;and the insertion loss and crosstalk are less than 1.14 and -30dB,respectively. The proposed analytical technique on waveguides and electrodes is proven to be accurate and computationally efficient when compared with the beam propa- gation method （BPM） and the experimental results.展开更多
Structure and design are proposed for a kind of novel polymer Mach-Zehnder electro-optic(EO)switch using side-coupled M series-cascaded EO microrings.Formulations are proposed to analyze its switching characteristics....Structure and design are proposed for a kind of novel polymer Mach-Zehnder electro-optic(EO)switch using side-coupled M series-cascaded EO microrings.Formulations are proposed to analyze its switching characteristics.The dependences of the device’s performances on M are thoroughly analyzed and concluded.As the increase of M from 2 to 10,the switching voltages for the 9 devices are as low as 0.84 V,0.82 V,0.52 V,0.5 V,0.37 V,0.36 V,0.29 V,0.28 V and 0.24 V,respectively;whereas the crosstalks under bar state are within-20.79--6.53 d B and those under cross state are within-20.36--5.29 d B.The analysis results indicate that a smaller M is preferred for dropping the insertion loss and crosstalk,and a larger M should be selected to increase the optical bandwidth and minimize the switching energy.Generally,due to low switching voltage,the proposed device shows potential applications in optical networks-on-chip.展开更多
基金the National Natural Science Foundation of China(No.60706011)the Doctoral Program for New Teachers of the Ministry of Education of China(No.20070183087)the State Key Development Program for Basic Research of China(No.2006CB302803)~~
文摘A polymer directional coupler （DC） electro-optic switch with push-pull electrodes and rib waveguides is designed based on the conformal transforming method, image method, coupled mode theory, and electro-optic modulation theory. Its structure and principle are described, the design and optimization are performed, and the characteristics are analyzed, including the coupling length, switching voltage, output power, insertion loss, and crosstalk. To realize normal switching function,the fabrication tolerance,wavelength shift, and coupling loss between a single mode fiber （SMF） and the waveguide are discussed. Simulation results show that the coupling length is 3082μm; the push-pull switching voltage is 2.14V;and the insertion loss and crosstalk are less than 1.14 and -30dB,respectively. The proposed analytical technique on waveguides and electrodes is proven to be accurate and computationally efficient when compared with the beam propa- gation method （BPM） and the experimental results.
基金supported by the National Natural Science Foundation of China(Nos.61107021,61177027 and 61077074)the Ministry of Education of China(Nos.20110061120052 and 20120061130008)the Science and Technology Department of Jilin Province of China(No.20130522161JH)
文摘Structure and design are proposed for a kind of novel polymer Mach-Zehnder electro-optic(EO)switch using side-coupled M series-cascaded EO microrings.Formulations are proposed to analyze its switching characteristics.The dependences of the device’s performances on M are thoroughly analyzed and concluded.As the increase of M from 2 to 10,the switching voltages for the 9 devices are as low as 0.84 V,0.82 V,0.52 V,0.5 V,0.37 V,0.36 V,0.29 V,0.28 V and 0.24 V,respectively;whereas the crosstalks under bar state are within-20.79--6.53 d B and those under cross state are within-20.36--5.29 d B.The analysis results indicate that a smaller M is preferred for dropping the insertion loss and crosstalk,and a larger M should be selected to increase the optical bandwidth and minimize the switching energy.Generally,due to low switching voltage,the proposed device shows potential applications in optical networks-on-chip.
