The infrared absorption method for methane concentration detection is an ideal way to detect methane at present. However, it is difficult to spread this method due to its high cost. In this paper, by using a wideband ...The infrared absorption method for methane concentration detection is an ideal way to detect methane at present. However, it is difficult to spread this method due to its high cost. In this paper, by using a wideband infrared light emitting di- ode （LED） accompanied with a PIN photo electric diode, a low-cost methane detection system was designed. To overcome the shortcomings caused by the wide working band, a differential light path was designed. By means of a differential ratio algo- rithm, the stability and the accuracy of the system were guaranteed. Finally, the validity of the system with the proposed algo- rithm was verified by the experiment results.展开更多
We formulate a “Moore’s law” for photonic integrated circuits (PICs) and their spatial integration density using two methods. One is decomposing the integrated photonics devices of diverse types into equivalent bas...We formulate a “Moore’s law” for photonic integrated circuits (PICs) and their spatial integration density using two methods. One is decomposing the integrated photonics devices of diverse types into equivalent basic elements, which makes a comparison with the generic elements of electronic integrated circuits more meaningful. The other is making a complex compo- nent equivalent to a series of basic elements of the same functionality, which is used to calculate the integration density for func- tional components realized with different structures. The results serve as a benchmark of the evolution of PICs and we can con- clude that the density of integration measured in this way roughly increases by a factor of 2 per year. The prospects for a continued increase of spatial integration density are discussed.展开更多
General multi-protocol label switching(GMPLS) based on traffic engineering is one of the possible methods to implement all-optical network. This method implements the network with IP technique and guarantees the quali...General multi-protocol label switching(GMPLS) based on traffic engineering is one of the possible methods to implement all-optical network. This method implements the network with IP technique and guarantees the quality of service with traffic engineering. Based on the establishment of selecting schemes of optical path and methods of traffic calculation, the wavelength routing algorithm of all-optical network based on traffic engineering is presented by combining with prior route of shortest path and traffic engineering, the algorithm procedures are given, and the actual examples are introduced as well as the analysis on simulation calculation. This research results have certain significance for the achievement of optical switching technique of all-optical network.展开更多
The increasing use of color terminals for personal computers has raised a demand for video graphic adapter(VGA)-format panel displays. Since only monochrome(ZnS∶Mn) electroluminescence(EL) displays of suitable size a...The increasing use of color terminals for personal computers has raised a demand for video graphic adapter(VGA)-format panel displays. Since only monochrome(ZnS∶Mn) electroluminescence(EL) displays of suitable size and speed are available, lack of colors has to be replaced by grayscale in the first place. There are two basic driving methods to achieve grayscale in thin-film EL displays: pulse amplitude modulation(PAM) method and pulse width modulation(PWM) method. But there are serious disadvantages of the two traditional methods. For the former method, the high voltage PAM ICs are too expensive to produce the grayscale EL display in bulks and the driver integrated circuit(IC) is complex. Though the PWM method has good grayscale display quality, the hardware implementation is too complex. A new driving method with which the width and the amplitude of the pulse can be modulated and simultaneously the challenge can be solved efficaciously is presented.展开更多
After analyzing the merits and shortcomings of Fixed-Alternated Routing algorithm (FAR) and Least Loaded Routing algorithm (LLR),we propose one novel dynamic optical routing algorithm. Having considered the influences...After analyzing the merits and shortcomings of Fixed-Alternated Routing algorithm (FAR) and Least Loaded Routing algorithm (LLR),we propose one novel dynamic optical routing algorithm. Having considered the influences of path’s length and path’s congestion just like in FAR and LLR,we take into account the network resource status-amount of free wavelengths in the network. Proposed algorithm sets up connections on three possible paths according to amount of available free wave-lengths in the network,which effectively decreases the blocking probability. The National Science Foundation (NSF) network and mesh-torus network simulation results show that the performance of this algorithm is better than that of FAR and LLR.展开更多
文摘The infrared absorption method for methane concentration detection is an ideal way to detect methane at present. However, it is difficult to spread this method due to its high cost. In this paper, by using a wideband infrared light emitting di- ode （LED） accompanied with a PIN photo electric diode, a low-cost methane detection system was designed. To overcome the shortcomings caused by the wide working band, a differential light path was designed. By means of a differential ratio algo- rithm, the stability and the accuracy of the system were guaranteed. Finally, the validity of the system with the proposed algo- rithm was verified by the experiment results.
文摘We formulate a “Moore’s law” for photonic integrated circuits (PICs) and their spatial integration density using two methods. One is decomposing the integrated photonics devices of diverse types into equivalent basic elements, which makes a comparison with the generic elements of electronic integrated circuits more meaningful. The other is making a complex compo- nent equivalent to a series of basic elements of the same functionality, which is used to calculate the integration density for func- tional components realized with different structures. The results serve as a benchmark of the evolution of PICs and we can con- clude that the density of integration measured in this way roughly increases by a factor of 2 per year. The prospects for a continued increase of spatial integration density are discussed.
基金National Key Lab of Broad Band Fiber Transmission and Communication System Technology , Ministry ofEducation
文摘General multi-protocol label switching(GMPLS) based on traffic engineering is one of the possible methods to implement all-optical network. This method implements the network with IP technique and guarantees the quality of service with traffic engineering. Based on the establishment of selecting schemes of optical path and methods of traffic calculation, the wavelength routing algorithm of all-optical network based on traffic engineering is presented by combining with prior route of shortest path and traffic engineering, the algorithm procedures are given, and the actual examples are introduced as well as the analysis on simulation calculation. This research results have certain significance for the achievement of optical switching technique of all-optical network.
文摘The increasing use of color terminals for personal computers has raised a demand for video graphic adapter(VGA)-format panel displays. Since only monochrome(ZnS∶Mn) electroluminescence(EL) displays of suitable size and speed are available, lack of colors has to be replaced by grayscale in the first place. There are two basic driving methods to achieve grayscale in thin-film EL displays: pulse amplitude modulation(PAM) method and pulse width modulation(PWM) method. But there are serious disadvantages of the two traditional methods. For the former method, the high voltage PAM ICs are too expensive to produce the grayscale EL display in bulks and the driver integrated circuit(IC) is complex. Though the PWM method has good grayscale display quality, the hardware implementation is too complex. A new driving method with which the width and the amplitude of the pulse can be modulated and simultaneously the challenge can be solved efficaciously is presented.
文摘After analyzing the merits and shortcomings of Fixed-Alternated Routing algorithm (FAR) and Least Loaded Routing algorithm (LLR),we propose one novel dynamic optical routing algorithm. Having considered the influences of path’s length and path’s congestion just like in FAR and LLR,we take into account the network resource status-amount of free wavelengths in the network. Proposed algorithm sets up connections on three possible paths according to amount of available free wave-lengths in the network,which effectively decreases the blocking probability. The National Science Foundation (NSF) network and mesh-torus network simulation results show that the performance of this algorithm is better than that of FAR and LLR.
