纳秒激光脉冲诱导硅表面微结构

利用Nd:YAG纳秒激光脉冲,在能量密度为1～10 J/cm2范围内辐照单晶硅,形成了表面锥形微结构,在SF6气氛和空气环境下均形成了锥形尖峰表面微结构。SF6气氛下产生的锥形尖峰顶端都有小球,部分锥形上还有二次尖峰形成,空气中纳秒激光诱导的锥形尖峰微结构顶端和边缘有由液滴固化形成的粒状物质,不同于利用准分子纳秒激光诱导的细长须状结构和飞秒激光辐照下产生的具有表面枝蔓状纳米结构的锥形微结构。实验结果表明,这种尖峰微结构的形成与辐照激光的波长和脉冲持续时间有关。对空气中微构造硅的辐射反射的初步研究表明,在500～2 400 nm范围内的光辐射反射率不高于20%。

一种快速检测提取高速铁路图像的方法研究

根据高速铁路路基的较高光辐射反射率,提出了一种基于数学形态学的图像二值化检测方法。计算机仿真证明,该方法能快速提取出高速铁路图像。

Investigation of Vacuum Ultraviolet Photoionization of Methylcyclohexane in Energy Region of 9-15.5 eV

Vacuum ultraviolet(VUV)photoionization and photodissociation of methylcyclohexane have been studied utilizing a reflectron time-of-flight mass spectrometer(RTOF-MS)with synchrotron radiation source.Photoionization efficiency curves(PIEs)of molecule ion C7H14^+ and fragment ions C7H13^+,C6H11^+,C6H10+,C5H10^+,C5H9^+,C4H8^+,C4H7^+,and C3H5^+ were observed.The ionization energy of methylcyclohexane was measured to be(9.80±0.03)eV,and appearance energies of fragment ions were determined from the PIEs.Optimized structures of transitional states,intermediates and product ions were characterized at the B3LYP/6-31G(d)level and the energies were calculated using G3B3 method.Formation channels of dominating fragment ions were proposed.Intramolecular hydrogen migrations and carbon ring-opening were the foremost processes in fragmentation pathways of methylcyclohexane.

Design of fiber-optic collector for spectrometer based on curved mirror

To enlarge the detection range of traditional fiber-optic spectrometer,two rotating parabolic mirrors were first used in the design of fiber-optic collector for spectrometer,which can extend the detection range of spectrometer from centimeter-scale to50m,as a super-low altitude remote sensing detector under passive lighting conditions.According to the performance requirements of fiber-spectrometer for optical collector,this study deduced the calculation formulae of design size of parabolic optical collector applied to different sensitivity spectrometers,different detection targets,different detection ranges and different weathers.Based on the calculation results,the model of fiber-optic collector with a diameter of16mm and a height of7.8mm was designed by ZEMAX.And then,TracePro,a light simulation software,was applied to ray tracing.The simulation results of optical radiation magnification agrees well with theoretical value,and the relative error is less than0.78%.This optical collector can effectively extend the detection range of spectrometer and expand its application fields and scopes.Compared with traditional refractive optical collector,it has several advantages of compact structure,low weight and low cost.

Estimating Fraction of Photosynthetically Active Radiation of Corn with Vegetation Indices and Neural Network from Hyperspectral Data

The fraction of photosynthetically active radiation （FPAR） is a key variable in the assessment of vegetation productivity and land ecosystem carbon cycles. Based on ground-measured corn hyperspectral reflectance and FPAR data over Northeast China, the correlations between corn-canopy FPAR and hyperspectral reflectance were analyzed, and the FPAR estimation performances using vegetation index （VI） and neural network （NN） methods with different two-band-combination hyperspectral reflectance were investigated. The results indicated that the corn-canopy FPAR retained almost a constant value in an entire day. The negative correlations between FPAR and visible and shortwave infrared reflectance （SWIR） bands are stronger than the positive correlations between FPAR and near-infrared band re- flectance （NIR）. For the six VIs, the normalized difference vegetation index （NDVI） and simple ratio （SR） performed best for estimating corn FPAR （the maximum R2 of 0.8849 and 0.8852, respectively）. However, the NN method esti- mated results （the maximum Rz is 0.9417） were obviously better than all of the VIs. For NN method, the two-band combinations showing the best corn FPAR estimation performances were from the NIR and visible bands; for VIs, however, they were from the SWIR and NIR bands. As for both the methods, the SWIR band performed exceptionally well for corn FPAR estimation. This may be attributable to the fact that the reflectance of the SWIR band were strongly controlled by leaf water content, which is a key component of corn photosynthesis and greatly affects the absorption of photosynthetically active radiation （APAR）, and makes further impact on corn-canopy FPAR.

Laser Cleaning of Mirror Surface for Optical Diagnostic Systems of the International Thermonuclear Experimental Reactor

The development of cleaning optics and deposition-mitigating techniques is a key factor in the construction and operation of optical diagnostics in ITER. The cleaning of optical surface by pulsed radiation from a fiber laser is an effective method that can recover optical properties of the mirror surface. The possibility of cleaning metallic mirrors from films with complex composition by pulsed radiation from a fiber laser has been experimentally researched. It has been shown that the high initial reflection characteristics of optical elements can be recovered by choosing regimes of radiation effect on the deposited surface. Efficient cleaning is ensured by radiation with the power density of less than 107 W/cm2. At this relatively low power density, pollutions are removed in a solid phase and the thermal effect on the mirror is insignificant. Preliminary experiments of the metal mirrors cleaning by fiber laser radiation have demonstrated the possibility of hardware implementation techniques.

Theoretical analysis of radiation-balanced double clad fiber laser

In this letter,a theoretical model of radiation-balanced double clad fiber laser is presented.The characteristic of the laser with Yb doped double clad fiber is analyzed numerically.It is concluded that high output laser power can be obtained by selecting output coupling mirror with lower reflectivity,improving Yb doped concentration and choosing fiber length. This result can help us to design radiation balanced fiber laser.