Basing on a viewpoint of all sided water producing system,a comprehensive analysis of the operation status and the relationship between each working unit in water producing system,including coagulation,sedimentation...Basing on a viewpoint of all sided water producing system,a comprehensive analysis of the operation status and the relationship between each working unit in water producing system,including coagulation,sedimentation and filtration etc.was made.By investigating the influence of backwashing consumption,the amount of sludge ejected from sedimentation tank and coagulant ratio upon the cost,the cost effective function of the system was presented.Afterwards,the solution was found out and the corresponding computer program was developed.When applied with real world data,it proved that this method significantly reduced the water producing cost.展开更多
In this paper, a novel unmanned aerial vehicle(UAV)-enabled full duplex decode-and-forward(DF) technique is used in mobile relaying system. Compared with conventional static relaying, mobile relaying provides more deg...In this paper, a novel unmanned aerial vehicle(UAV)-enabled full duplex decode-and-forward(DF) technique is used in mobile relaying system. Compared with conventional static relaying, mobile relaying provides more degree of freedom for experiencing better channel conditions and further improving the system reliable performance. The source and relay transmit power as well as relay trajectory are jointly optimized for sum outage probability minimization in mobile relaying system. Due to the non-convex nature of the original problem, block coordinate decent optimization techniques are employed to decompose it into two sub-problems, which leads to an efficient iterative algorithm. Specifically, for the pre-determined relay trajectory, the optimal transmit power of source and relay are obtained by solving Karush-Kuhn-Tucker(KKT) conditions. For the given source/relay power allocation, the optimal UAV trajectory is obtained by solving dual problem. Based on the two steps, an iterative algorithm is proposed to jointly optimize source/relay power allocation and UAV trajectory alternately. Numerical results show the performance gain of our proposed scheme.展开更多
For an energy-efficient induction machine, the life-cycle cost (LCC) usually is the most important index to the consumer. With this target, the optimization design of a motor is a complex nonlinear problem with constr...For an energy-efficient induction machine, the life-cycle cost (LCC) usually is the most important index to the consumer. With this target, the optimization design of a motor is a complex nonlinear problem with constraints. To solve the problem, the authors introduce a united random algorithm. At first, the problem is divided into two parts, the optimal rotor slots and the optimization of other dimensions. Before optimizing the rotor slots with genetic algorithm ( GA), the second part is solved with TABU algorithm to simplify the problem. The numerical results showed that this method is better than the method using a traditional algorithm.展开更多
It is an emerging realistic problem on how to promote a high level of technology in the coal industry, find new upgrading powers and create new competitive advantages, which are also the core problems to efficient tra...It is an emerging realistic problem on how to promote a high level of technology in the coal industry, find new upgrading powers and create new competitive advantages, which are also the core problems to efficient transformation pattern of economic growth for coal industry in the ''twelfth five-year'' period, involving the key to China's energy supply and energy security. Through field surveys and inductive analyses, analyzing of the content of upgrading the coal industry as an entry point, this paper analyzes the sustainable development mechanisms for the coal industry from the aspects of work force, power, methods, goals, and so on; and puts forward corresponding developmental modes according to the mechanisms which can improve resource recovery and mineral resources utilization rates by putting them into practice.展开更多
文摘Basing on a viewpoint of all sided water producing system,a comprehensive analysis of the operation status and the relationship between each working unit in water producing system,including coagulation,sedimentation and filtration etc.was made.By investigating the influence of backwashing consumption,the amount of sludge ejected from sedimentation tank and coagulant ratio upon the cost,the cost effective function of the system was presented.Afterwards,the solution was found out and the corresponding computer program was developed.When applied with real world data,it proved that this method significantly reduced the water producing cost.
基金supported by National High Technology Project of China 2015AA01A703Scientific and Technological Key Project of Henan Province under Grant 182102210449the National Natural Science Foundation of China under Grants 61372101 and 61671144
文摘In this paper, a novel unmanned aerial vehicle(UAV)-enabled full duplex decode-and-forward(DF) technique is used in mobile relaying system. Compared with conventional static relaying, mobile relaying provides more degree of freedom for experiencing better channel conditions and further improving the system reliable performance. The source and relay transmit power as well as relay trajectory are jointly optimized for sum outage probability minimization in mobile relaying system. Due to the non-convex nature of the original problem, block coordinate decent optimization techniques are employed to decompose it into two sub-problems, which leads to an efficient iterative algorithm. Specifically, for the pre-determined relay trajectory, the optimal transmit power of source and relay are obtained by solving Karush-Kuhn-Tucker(KKT) conditions. For the given source/relay power allocation, the optimal UAV trajectory is obtained by solving dual problem. Based on the two steps, an iterative algorithm is proposed to jointly optimize source/relay power allocation and UAV trajectory alternately. Numerical results show the performance gain of our proposed scheme.
文摘For an energy-efficient induction machine, the life-cycle cost (LCC) usually is the most important index to the consumer. With this target, the optimization design of a motor is a complex nonlinear problem with constraints. To solve the problem, the authors introduce a united random algorithm. At first, the problem is divided into two parts, the optimal rotor slots and the optimization of other dimensions. Before optimizing the rotor slots with genetic algorithm ( GA), the second part is solved with TABU algorithm to simplify the problem. The numerical results showed that this method is better than the method using a traditional algorithm.
文摘It is an emerging realistic problem on how to promote a high level of technology in the coal industry, find new upgrading powers and create new competitive advantages, which are also the core problems to efficient transformation pattern of economic growth for coal industry in the ''twelfth five-year'' period, involving the key to China's energy supply and energy security. Through field surveys and inductive analyses, analyzing of the content of upgrading the coal industry as an entry point, this paper analyzes the sustainable development mechanisms for the coal industry from the aspects of work force, power, methods, goals, and so on; and puts forward corresponding developmental modes according to the mechanisms which can improve resource recovery and mineral resources utilization rates by putting them into practice.