This work illustrates the steady state, two dimensional natural convective flow and heat transfer features in square enclosure containing heated hexagonal block maintained either at constant wall temperature(CWT) or u...This work illustrates the steady state, two dimensional natural convective flow and heat transfer features in square enclosure containing heated hexagonal block maintained either at constant wall temperature(CWT) or uniform heat flux(UHF) thermal conditions. Governing equations(mass, momentum and energy) are solved by using finite volume method(FVM) with 3rd order accurate QUICK discretization scheme and SIMPLE algorithm for range of field pertinent parameters such as, Grashof number(10~3≤ Gr ≤ 10~6), Prandtl number(1 ≤ Pr ≤ 100) and power law index(0.5 ≤ n ≤ 1.5). The analysis of momentum and heat transfer characteristics are delineated by evolution of streamlines, isotherms, variation of average Nusselt number value and Colburn factor for natural convection(j_(nH)). A remarkable change is observed on fluid flow and thermal distribution pattern in cavity for both thermal conditions. Nusselt number shows linear variation with Grashof and Prandtl numbers; while rate of heat transfer by convection decreases for power law index value. Higher heat transfer rate can be achieved by using uniform heat flux condition. A Nusselt number correlation is developed for possible utilization in engineering/scientific design purpose.展开更多
As a solid lubricant, silver-palladium (Ag-Pd) alloy coating was investigated for the application to high temperature stud bolt. A glue layer nickel (Ni) film was deposited on the surface of the hex bolt sample and th...As a solid lubricant, silver-palladium (Ag-Pd) alloy coating was investigated for the application to high temperature stud bolt. A glue layer nickel (Ni) film was deposited on the surface of the hex bolt sample and then Ag-Pd alloy coating was performed on it using ion plating method. The friction coefficient of Ag-Pd alloy film coated bolt was lower than that of N-5000 oil coated bolt by the result of axial force measurement. The cyclic test of heat treatment was conducted to evaluate the durability of Ag-Pd alloy film coated bolt. In a cycle, sample was assembled into the block using torque wrench, followed by heating and disassembling. It was not successful to disassemble the N-5000 oil coated bolt from the block after only one cycle. However, the Ag-Pd alloy film coated bolt was able to be disassembled softly till 12 cycles.展开更多
Here we report the discovery of the first ternary molybdenum pnictide based superconductor K2Mo3As3. Polycrystalline samples were synthesized by the conventional solid state reaction method. X-ray diffrac- tion analys...Here we report the discovery of the first ternary molybdenum pnictide based superconductor K2Mo3As3. Polycrystalline samples were synthesized by the conventional solid state reaction method. X-ray diffrac- tion analysis reveals a quasi-one-dimensional hexagonal crystal structure with （Mo3As3）2 linear chains separated by K^＋ ions, similar as previously reported K2Cr3As3, with the space group of P-6m2 （No. 187） and the refined lattice parameters a = 10.145（5） A and c = 4.453（8） A. Electrical resistivity, magnetic susceptibility, and heat capacity measurements exhibit bulk superconductivity with the onset Tc at 10.4 K in K2Mo3As3 which is higher than the isostructural Cr-based superconductors. Being the same group VIB transition elements and with similar structural motifs, these Cr and Mo based superconductors may share some common underlying origins for the occurrence of superconductivity and need more investigations to uncover the electron pairing within a quasi-one-dimensional chain structure.展开更多
By citrate sol-gel auto-combustion method,the nanophase M-type planar hexagonal ferrite is prepared.The transmission electron microscopy(TEM),X-ray diffraction(XRD) and thermal analysis are used to study the grain siz...By citrate sol-gel auto-combustion method,the nanophase M-type planar hexagonal ferrite is prepared.The transmission electron microscopy(TEM),X-ray diffraction(XRD) and thermal analysis are used to study the grain size,phase composition,microstructure and crystallization process.The results show that the nanophase M-type Sr-ferrite prepared by this method is single,and its grain size is smaller than 100 nm.Moreover,most of the grains present hexagonal sheet shape.Tests are carried out for its attenuation to 1.06 mm laser.It is found that the extinction capability of the nanophase M-type Sr-ferrite smoke is good,and its mass extinction coefficient is 1.628 m2/g.展开更多
文摘This work illustrates the steady state, two dimensional natural convective flow and heat transfer features in square enclosure containing heated hexagonal block maintained either at constant wall temperature(CWT) or uniform heat flux(UHF) thermal conditions. Governing equations(mass, momentum and energy) are solved by using finite volume method(FVM) with 3rd order accurate QUICK discretization scheme and SIMPLE algorithm for range of field pertinent parameters such as, Grashof number(10~3≤ Gr ≤ 10~6), Prandtl number(1 ≤ Pr ≤ 100) and power law index(0.5 ≤ n ≤ 1.5). The analysis of momentum and heat transfer characteristics are delineated by evolution of streamlines, isotherms, variation of average Nusselt number value and Colburn factor for natural convection(j_(nH)). A remarkable change is observed on fluid flow and thermal distribution pattern in cavity for both thermal conditions. Nusselt number shows linear variation with Grashof and Prandtl numbers; while rate of heat transfer by convection decreases for power law index value. Higher heat transfer rate can be achieved by using uniform heat flux condition. A Nusselt number correlation is developed for possible utilization in engineering/scientific design purpose.
基金the research fund of the Korea Institute of Materials Science, a subsidiary branch of the Korea Institute of Machinery and Materialssupported by a grant from the Fundamental R&D Program for Core Technology of Materials funded by the Ministry of Knowledge Economy, Republic of Korea
文摘As a solid lubricant, silver-palladium (Ag-Pd) alloy coating was investigated for the application to high temperature stud bolt. A glue layer nickel (Ni) film was deposited on the surface of the hex bolt sample and then Ag-Pd alloy coating was performed on it using ion plating method. The friction coefficient of Ag-Pd alloy film coated bolt was lower than that of N-5000 oil coated bolt by the result of axial force measurement. The cyclic test of heat treatment was conducted to evaluate the durability of Ag-Pd alloy film coated bolt. In a cycle, sample was assembled into the block using torque wrench, followed by heating and disassembling. It was not successful to disassemble the N-5000 oil coated bolt from the block after only one cycle. However, the Ag-Pd alloy film coated bolt was able to be disassembled softly till 12 cycles.
基金supported by the National Natural Science Foundation of China(11474339 and 11774402)the National Basic Research Program of China(973 Program,2016YFA0300301)the Youth Innovation Promotion Association of the Chinese Academy of Sciences
文摘Here we report the discovery of the first ternary molybdenum pnictide based superconductor K2Mo3As3. Polycrystalline samples were synthesized by the conventional solid state reaction method. X-ray diffrac- tion analysis reveals a quasi-one-dimensional hexagonal crystal structure with （Mo3As3）2 linear chains separated by K^＋ ions, similar as previously reported K2Cr3As3, with the space group of P-6m2 （No. 187） and the refined lattice parameters a = 10.145（5） A and c = 4.453（8） A. Electrical resistivity, magnetic susceptibility, and heat capacity measurements exhibit bulk superconductivity with the onset Tc at 10.4 K in K2Mo3As3 which is higher than the isostructural Cr-based superconductors. Being the same group VIB transition elements and with similar structural motifs, these Cr and Mo based superconductors may share some common underlying origins for the occurrence of superconductivity and need more investigations to uncover the electron pairing within a quasi-one-dimensional chain structure.
文摘By citrate sol-gel auto-combustion method,the nanophase M-type planar hexagonal ferrite is prepared.The transmission electron microscopy(TEM),X-ray diffraction(XRD) and thermal analysis are used to study the grain size,phase composition,microstructure and crystallization process.The results show that the nanophase M-type Sr-ferrite prepared by this method is single,and its grain size is smaller than 100 nm.Moreover,most of the grains present hexagonal sheet shape.Tests are carried out for its attenuation to 1.06 mm laser.It is found that the extinction capability of the nanophase M-type Sr-ferrite smoke is good,and its mass extinction coefficient is 1.628 m2/g.
