Considering the self-excited and forced vibrations in high-speed milling processes, a novel method for dynamic optimization of system stability is used to determine the cutting parameters and structural parameters by ...Considering the self-excited and forced vibrations in high-speed milling processes, a novel method for dynamic optimization of system stability is used to determine the cutting parameters and structural parameters by increasing the chatter free material removal rate （CF-MRR） and surface finish. The method is hased on the theory of the chatter stability and the semi-bandwidth of the resonant region. The objective function of the method is material removal rate（MRR）,the constraints are chatter stability and surface finish, and the optimizing variables are cutting and structural parameters. The optimization procedure is stated. The method is applied to a milling system and CF-MRR is increased 18.86%. It is shown that the influences of the chatter stability and the resonance are simultaneously considered in the dynamic optimization of the milling system for increasing CF-MRR and the surface finish.展开更多
An electromechanical nonlinear model of rotor system of electric machine is built.Respondance curves in parameter excited nonlinear vibration of this system caused by electromagnetic forces are investigated.Further mo...An electromechanical nonlinear model of rotor system of electric machine is built.Respondance curves in parameter excited nonlinear vibration of this system caused by electromagnetic forces are investigated.Further more,the analysis reveals the effects of various electromagnetic and mechanical parameters on resonances, and some valuable results are obtained.The analytical result of this paper provides electric machine with the condition of 1/2 subharmonic resonance under the electromechanical electromagnetic forces.Electromagnetic forces apparently affect the stability zone, and both linear term and nonlinear term can excite parametric resonance.The revealed dynamic phenomena provide some new theories and active methods for the fault recognition of electric machine and the defination of stability range,and the theoretical bases for qualitatively controlling the stable operating state of rotors.展开更多
The 2-dimensional equivalent model used in helicopter ground resonance analysis is convenient for its simplicity and clarity. The equivalent body mass, the stiffness and the damping are derived from the modal charaCte...The 2-dimensional equivalent model used in helicopter ground resonance analysis is convenient for its simplicity and clarity. The equivalent body mass, the stiffness and the damping are derived from the modal charaCteristics. In this paper, a 3-dimensional space model is constructed to analyse the ground resonance.There is little difference between the calculated results of the 2-dimensional equivalent model and those of the 3-dimensional space model. Hence, the 2-dimensional model is verified for the practical application. Generally, the linear lead-lag damping of the equivalent rotor blade at the modal frequency is derived from the lead-lag damper characteristics by a procedure of iteration. The transformation of the imaginary part of the complex modulus of the viscoelastic damper into a linear velocity damping is complicated in analysis. A method to use the complex modulus directly in the ground resonance analysis is derived and verified.展开更多
Sliver nanoplates were prepared through a visible light induced reduction process by a reaction between sodium citrate and silver nitrate in an aqueous solvent at room temperature. UV-Vis spectra were employed to moni...Sliver nanoplates were prepared through a visible light induced reduction process by a reaction between sodium citrate and silver nitrate in an aqueous solvent at room temperature. UV-Vis spectra were employed to monitor the growth of the silver nanoplates. The resulting spectra indicated that, at an early stage, the products were spherical particles with planar nanoparticles appearing and growing subsequently. In the last stages of the process, some spherical particles were consumed by the growth of the nanoparticles, through an Ostwald ripening mechanism. Furthermore, it was found that the addition of either Poly（Vinyl Pyrrolidone） （PVP） or excessive citrate could stabilize the colloidal system effectively, and that rigorous stirring was necessary for the anticipant products, Introduction of a large quantities of sodium hydroxide can dramatically accelerate the reactive rate of the photoreduction process.展开更多
Agricultural sustainability relates directly to maintaining or enhancing soil quality. Soil quality studies in Canada during the 1980 s showed that loss of soil organic matter (SOM) and soil aggregate stability was st...Agricultural sustainability relates directly to maintaining or enhancing soil quality. Soil quality studies in Canada during the 1980 s showed that loss of soil organic matter (SOM) and soil aggregate stability was standard features of non-sustainable land management in agroecosystems. In this study total soil organic carbon (SOC), particulate organic matter (POM), POM-C as a percentage of total SOC, and aggregate stability were determined for three cultivated fields and three adjacent grassland fields to a…展开更多
Electromagnetic and mechanical forces are main reasons of oscillations in hydro-generators.The oscillation is fairly complicated as to the coupling of them.Using the method of multiple scales in nonlinear oscillations...Electromagnetic and mechanical forces are main reasons of oscillations in hydro-generators.The oscillation is fairly complicated as to the coupling of them.Using the method of multiple scales in nonlinear oscillations,instabilities of hydro-generator rotors caused by the unbalanced magnetic pull,which comes from the eccentricity of the rotor,are discussed.Considering nonlinear properties of the unbalanced magnetic pull,the super-harmonic resonance phenomena are observed as the critical rotating speed of rotors is close to twice of the operating speed.This is verified by a model experiment,and should be considered during the design of hydro-generator rotors.展开更多
The authors examined the thermal change in the aroma profile of myrrh. The fresh odor of raw myrrh and its hexane extract depended on the amount of （E）-13-ocimene. Myrrh was extracted with hexane to avoid inducing c...The authors examined the thermal change in the aroma profile of myrrh. The fresh odor of raw myrrh and its hexane extract depended on the amount of （E）-13-ocimene. Myrrh was extracted with hexane to avoid inducing changes in the constituents and odor. The main constituent, （E）-L3-ocimene （group A; low boiling point）, and the other constituents （group B; high boiling point） of the hexane extract were separated by bulb-to-bulb distillation. The constituents of groups A and B were analyzed over time by nuclear magnetic resonance analysis and the odors were evaluated. Myrrh＇s odor depended on both the amount of thermally unstable （E）-[3-ocimene, which contributed to the fresh odor, and the constituents of group B （thermally stable）, which contributed to the myrrh-like odor. Six compounds （c^-santalene, （Z）-a-bisabolene, c^-bergamotene, （E）-ct-santalal, c^-photosantalol and campherenol） were isolated from group B. No individual group B component had a myrrh-like odor, although the combined odor of group B was myrrh like. The authors demonstrated that the aroma profile of myrrh depends on the thermal instability of （E）-^-ocimene and a combination of six thermally stable terpenes with similar molecular structures.展开更多
基金Supported by the National Key Basic Research Program of China("973"Project)(2009CB724401)the China Postdoctoral Science Foundation(20070420208)the Postdoctoral Innovation Foundation of Shandong Province(200702023)~~
文摘Considering the self-excited and forced vibrations in high-speed milling processes, a novel method for dynamic optimization of system stability is used to determine the cutting parameters and structural parameters by increasing the chatter free material removal rate （CF-MRR） and surface finish. The method is hased on the theory of the chatter stability and the semi-bandwidth of the resonant region. The objective function of the method is material removal rate（MRR）,the constraints are chatter stability and surface finish, and the optimizing variables are cutting and structural parameters. The optimization procedure is stated. The method is applied to a milling system and CF-MRR is increased 18.86%. It is shown that the influences of the chatter stability and the resonance are simultaneously considered in the dynamic optimization of the milling system for increasing CF-MRR and the surface finish.
文摘An electromechanical nonlinear model of rotor system of electric machine is built.Respondance curves in parameter excited nonlinear vibration of this system caused by electromagnetic forces are investigated.Further more,the analysis reveals the effects of various electromagnetic and mechanical parameters on resonances, and some valuable results are obtained.The analytical result of this paper provides electric machine with the condition of 1/2 subharmonic resonance under the electromechanical electromagnetic forces.Electromagnetic forces apparently affect the stability zone, and both linear term and nonlinear term can excite parametric resonance.The revealed dynamic phenomena provide some new theories and active methods for the fault recognition of electric machine and the defination of stability range,and the theoretical bases for qualitatively controlling the stable operating state of rotors.
文摘The 2-dimensional equivalent model used in helicopter ground resonance analysis is convenient for its simplicity and clarity. The equivalent body mass, the stiffness and the damping are derived from the modal charaCteristics. In this paper, a 3-dimensional space model is constructed to analyse the ground resonance.There is little difference between the calculated results of the 2-dimensional equivalent model and those of the 3-dimensional space model. Hence, the 2-dimensional model is verified for the practical application. Generally, the linear lead-lag damping of the equivalent rotor blade at the modal frequency is derived from the lead-lag damper characteristics by a procedure of iteration. The transformation of the imaginary part of the complex modulus of the viscoelastic damper into a linear velocity damping is complicated in analysis. A method to use the complex modulus directly in the ground resonance analysis is derived and verified.
文摘Sliver nanoplates were prepared through a visible light induced reduction process by a reaction between sodium citrate and silver nitrate in an aqueous solvent at room temperature. UV-Vis spectra were employed to monitor the growth of the silver nanoplates. The resulting spectra indicated that, at an early stage, the products were spherical particles with planar nanoparticles appearing and growing subsequently. In the last stages of the process, some spherical particles were consumed by the growth of the nanoparticles, through an Ostwald ripening mechanism. Furthermore, it was found that the addition of either Poly（Vinyl Pyrrolidone） （PVP） or excessive citrate could stabilize the colloidal system effectively, and that rigorous stirring was necessary for the anticipant products, Introduction of a large quantities of sodium hydroxide can dramatically accelerate the reactive rate of the photoreduction process.
基金Project supported by the USDA-NRCS National Employee Development Center, USA the Chinese Academy of Sciences for the Hundred Talents Program, and the Federal Hatch Program, USA (No.MAS00860)
文摘Agricultural sustainability relates directly to maintaining or enhancing soil quality. Soil quality studies in Canada during the 1980 s showed that loss of soil organic matter (SOM) and soil aggregate stability was standard features of non-sustainable land management in agroecosystems. In this study total soil organic carbon (SOC), particulate organic matter (POM), POM-C as a percentage of total SOC, and aggregate stability were determined for three cultivated fields and three adjacent grassland fields to a…
基金Sponsored by the National Natural Science Foundation of China(Grant No.59493700),Key Project of the National Tenth-Five Year Research Programme of China(Grant No.ZZ01-01-04-03).
文摘Electromagnetic and mechanical forces are main reasons of oscillations in hydro-generators.The oscillation is fairly complicated as to the coupling of them.Using the method of multiple scales in nonlinear oscillations,instabilities of hydro-generator rotors caused by the unbalanced magnetic pull,which comes from the eccentricity of the rotor,are discussed.Considering nonlinear properties of the unbalanced magnetic pull,the super-harmonic resonance phenomena are observed as the critical rotating speed of rotors is close to twice of the operating speed.This is verified by a model experiment,and should be considered during the design of hydro-generator rotors.
文摘The authors examined the thermal change in the aroma profile of myrrh. The fresh odor of raw myrrh and its hexane extract depended on the amount of （E）-13-ocimene. Myrrh was extracted with hexane to avoid inducing changes in the constituents and odor. The main constituent, （E）-L3-ocimene （group A; low boiling point）, and the other constituents （group B; high boiling point） of the hexane extract were separated by bulb-to-bulb distillation. The constituents of groups A and B were analyzed over time by nuclear magnetic resonance analysis and the odors were evaluated. Myrrh＇s odor depended on both the amount of thermally unstable （E）-[3-ocimene, which contributed to the fresh odor, and the constituents of group B （thermally stable）, which contributed to the myrrh-like odor. Six compounds （c^-santalene, （Z）-a-bisabolene, c^-bergamotene, （E）-ct-santalal, c^-photosantalol and campherenol） were isolated from group B. No individual group B component had a myrrh-like odor, although the combined odor of group B was myrrh like. The authors demonstrated that the aroma profile of myrrh depends on the thermal instability of （E）-^-ocimene and a combination of six thermally stable terpenes with similar molecular structures.
