Brittle pro-eutectoid cementite that forms along prior-austenite in hypereutectoid steels is deleterious to mechanical properties. The optimum process parameters which suppress the formation of pro-eutectoid cementite...Brittle pro-eutectoid cementite that forms along prior-austenite in hypereutectoid steels is deleterious to mechanical properties. The optimum process parameters which suppress the formation of pro-eutectoid cementite in hypereutectoid steels with carbon content in the range of 0.8%-1.3% in mass fraction, were investigated. Pro-eutectoid cementite formation is effectively hindered by increasing the deformation temperature and decreasing the amount of strain. Transformation at lower temperatures close to the nose of the cooling-transformation diagram also reduces the tendency of the formation of pro-eutectoid cementite. Control of prior-austenite grain size and grain boundary conditions is important. Due to larger number of nucleation sites, finer prior-austenite grain size results in the acceleration of transformation to pro-eutectoid cementite. However, large prior-austenite and straight boundaries lead to less nucleation sites of pro-eutectoid cementite. The cooling rate and carbon content should be reduced as much as possible. The transformation temperature below 660 °C and the strain of 0.5 at deformation temperature of 850 °C are suggested.展开更多
The time has come for the constitution of the Association of Southeast Asian Nations （ASEAN） economic community and many facts have been analyzed regarding this topic. This paper presents the results of the statisti...The time has come for the constitution of the Association of Southeast Asian Nations （ASEAN） economic community and many facts have been analyzed regarding this topic. This paper presents the results of the statistical analysis applied to several economic parameters which firstly show how their integration pattern adjusts with a considerable good fitting to the optimum currency area model and to its extended version by Behrens; and secondly how the 10 members of this group are moving at relatively same speed in spite of their differences, that are also inferred for ranging.展开更多
As a growing number of countries, including both developed and developing countries, have in recent yearstaken environmental regulation at different levels, a question of great concern has been raised: can the regulat...As a growing number of countries, including both developed and developing countries, have in recent yearstaken environmental regulation at different levels, a question of great concern has been raised: can the regulation alterthe existing trade volume and trade pattern, and ultimately drive pollution-intensive industries to countries with low-levelregulations or even those without regulations at all? Starting from the three different propositions concerning therelationship between environmental regulation and trade pattern, this paper applies cointegration analysis and errorcorrection model to empirically testing the relationship between environmental regulation and trade in China during theperiod of 1985-2005. Our empirical results indicate that in the short run the collection of pollution discharge fees bearsa positive impact on the export share of clean products of total exports. Thus, higher pollution discharge fees raise theratio of clean products exports to total exports. This further indicates that more stringent environmental regulationpromotes the exports of clean products. In the long run pollution discharge fees are positively correlated with the exportshare of clean products but negatively associated with their import share. Such correlations imply that environmentalregulation tends to facilitate the international specialization in line with comparative advantages.展开更多
Taking Shandong Province as the research object,this paper uses the principal component analysis method to evaluate the status of the rural human settlement in Shandong Province.It establishes the evaluation index sys...Taking Shandong Province as the research object,this paper uses the principal component analysis method to evaluate the status of the rural human settlement in Shandong Province.It establishes the evaluation index system of the rural residential environment in Shandong Province,including living environment,economy,infrastructure,public service facilities,and ecological environment,in total five comprehensive index,and 20 secondary indexes.Through measurement and sorting of rural human environment development level of Shandong Province in 2010,the 17 cities are divided into-excellent,good,ordinary,poor-four development areas and are analyzed based on the restriction factor in the development of the region.展开更多
The situation of the contemporary economic systems is based on their ability to ensure optimal response to the customer needs. There are several important groups of clients, who may determine development processes and...The situation of the contemporary economic systems is based on their ability to ensure optimal response to the customer needs. There are several important groups of clients, who may determine development processes and who are recipients of public services. They include： residents, entrepreneurs, tourists, and State Treasury. Local governments are equipped with a range of legal instruments to provide public services addressed to the selected clients. The objective of this paper is to present the application of the AHP method to assess the significance of the selected categories of public services for different groups of clients in Poland. The results allow setting priorities for future policy and adjust the tasks to the specific expectations of each group of clients. The model of assessment of public services was built using the analytic hierarchy process （AHP）. Since the 1970＇s, this multicriteria decision-support method has been used by researchers and practitioners in many areas of socioeconomic life. The case study presented in this paper involved 14 experts--public administration workers in one of the districts in Southern Poland. The survey consisted of two stages. First, they assessed--using the AHP--the influence of each group of customers on local development processes. The most important was ＂business＂ （priority 38.7%）, followed by ＂tourists＂ （29.7%）, ＂citizens＂ （26.1%）, and ＂central administration＂ （5.5%）. Second, they evaluated at the five-point Liken scale the influence of over 20 different public services with respect to different groups of clients. The results were aggregated using arithmetic mean and multiplied by the priorities of the clients. The synthesized final score indicated the most significant public activities overall, which were ＂roads＂ （4.16）, ＂transport＂ （3.93）, and ＂tourism＂ （3.84）.展开更多
A novel chain complex was synthesized and its crystal structure has been deter- mined by X-ray diffraction technique. It was found that the local coordination geometry around Cu(Ⅱ) is a distorted tetrahedron and C14H...A novel chain complex was synthesized and its crystal structure has been deter- mined by X-ray diffraction technique. It was found that the local coordination geometry around Cu(Ⅱ) is a distorted tetrahedron and C14H9CuNO3CH3OH is bridged by the carboxylate oxygen atom to form an infinite one-dimensional linear chain. The hydrogen bond exists between O(1) and solvate molecule O(4). The crystal belongs to monoclinic, space group P21 with a = 9.6650(19), b = 7.1280(14), c = 9.925(2) ? b = 98.39(3)? V = 676.4(2) 3, Z = 2, F(000) = 342 and m(MoK? = 1.629 mm-1 .展开更多
基金Project(51222405)supported by the National Science Foundation for Outstanding Young Scholars of ChinaProject(51034002)supported by the National Natural Science Foundation of China+1 种基金Project(132002)supported by the Fok Ying Tong Education Foundation,ChinaProject(N120502001)supported by the Basic Scientific Research Operation of Center University of China
文摘Brittle pro-eutectoid cementite that forms along prior-austenite in hypereutectoid steels is deleterious to mechanical properties. The optimum process parameters which suppress the formation of pro-eutectoid cementite in hypereutectoid steels with carbon content in the range of 0.8%-1.3% in mass fraction, were investigated. Pro-eutectoid cementite formation is effectively hindered by increasing the deformation temperature and decreasing the amount of strain. Transformation at lower temperatures close to the nose of the cooling-transformation diagram also reduces the tendency of the formation of pro-eutectoid cementite. Control of prior-austenite grain size and grain boundary conditions is important. Due to larger number of nucleation sites, finer prior-austenite grain size results in the acceleration of transformation to pro-eutectoid cementite. However, large prior-austenite and straight boundaries lead to less nucleation sites of pro-eutectoid cementite. The cooling rate and carbon content should be reduced as much as possible. The transformation temperature below 660 °C and the strain of 0.5 at deformation temperature of 850 °C are suggested.
文摘The time has come for the constitution of the Association of Southeast Asian Nations （ASEAN） economic community and many facts have been analyzed regarding this topic. This paper presents the results of the statistical analysis applied to several economic parameters which firstly show how their integration pattern adjusts with a considerable good fitting to the optimum currency area model and to its extended version by Behrens; and secondly how the 10 members of this group are moving at relatively same speed in spite of their differences, that are also inferred for ranging.
文摘As a growing number of countries, including both developed and developing countries, have in recent yearstaken environmental regulation at different levels, a question of great concern has been raised: can the regulation alterthe existing trade volume and trade pattern, and ultimately drive pollution-intensive industries to countries with low-levelregulations or even those without regulations at all? Starting from the three different propositions concerning therelationship between environmental regulation and trade pattern, this paper applies cointegration analysis and errorcorrection model to empirically testing the relationship between environmental regulation and trade in China during theperiod of 1985-2005. Our empirical results indicate that in the short run the collection of pollution discharge fees bearsa positive impact on the export share of clean products of total exports. Thus, higher pollution discharge fees raise theratio of clean products exports to total exports. This further indicates that more stringent environmental regulationpromotes the exports of clean products. In the long run pollution discharge fees are positively correlated with the exportshare of clean products but negatively associated with their import share. Such correlations imply that environmentalregulation tends to facilitate the international specialization in line with comparative advantages.
基金founded by the Social Science Planning and Research Project of Shandong Province (Grant No.09CJGZ45)
文摘Taking Shandong Province as the research object,this paper uses the principal component analysis method to evaluate the status of the rural human settlement in Shandong Province.It establishes the evaluation index system of the rural residential environment in Shandong Province,including living environment,economy,infrastructure,public service facilities,and ecological environment,in total five comprehensive index,and 20 secondary indexes.Through measurement and sorting of rural human environment development level of Shandong Province in 2010,the 17 cities are divided into-excellent,good,ordinary,poor-four development areas and are analyzed based on the restriction factor in the development of the region.
文摘The situation of the contemporary economic systems is based on their ability to ensure optimal response to the customer needs. There are several important groups of clients, who may determine development processes and who are recipients of public services. They include： residents, entrepreneurs, tourists, and State Treasury. Local governments are equipped with a range of legal instruments to provide public services addressed to the selected clients. The objective of this paper is to present the application of the AHP method to assess the significance of the selected categories of public services for different groups of clients in Poland. The results allow setting priorities for future policy and adjust the tasks to the specific expectations of each group of clients. The model of assessment of public services was built using the analytic hierarchy process （AHP）. Since the 1970＇s, this multicriteria decision-support method has been used by researchers and practitioners in many areas of socioeconomic life. The case study presented in this paper involved 14 experts--public administration workers in one of the districts in Southern Poland. The survey consisted of two stages. First, they assessed--using the AHP--the influence of each group of customers on local development processes. The most important was ＂business＂ （priority 38.7%）, followed by ＂tourists＂ （29.7%）, ＂citizens＂ （26.1%）, and ＂central administration＂ （5.5%）. Second, they evaluated at the five-point Liken scale the influence of over 20 different public services with respect to different groups of clients. The results were aggregated using arithmetic mean and multiplied by the priorities of the clients. The synthesized final score indicated the most significant public activities overall, which were ＂roads＂ （4.16）, ＂transport＂ （3.93）, and ＂tourism＂ （3.84）.
文摘A novel chain complex was synthesized and its crystal structure has been deter- mined by X-ray diffraction technique. It was found that the local coordination geometry around Cu(Ⅱ) is a distorted tetrahedron and C14H9CuNO3CH3OH is bridged by the carboxylate oxygen atom to form an infinite one-dimensional linear chain. The hydrogen bond exists between O(1) and solvate molecule O(4). The crystal belongs to monoclinic, space group P21 with a = 9.6650(19), b = 7.1280(14), c = 9.925(2) ? b = 98.39(3)? V = 676.4(2) 3, Z = 2, F(000) = 342 and m(MoK? = 1.629 mm-1 .
