闯出一条阳关道——上海海关通关变革记

二十年前的今天，时代伟人邓小平在社会主义中国的发展蓝图上写下遒劲的四个大字：“改革开放”。历史，在这一瞬间，把中国推到了震惊世界的转折点上。发展，发展！炎黄子孙，鼓劲加油。工、农、商、学、兵，人人想变；东、西、南、北、中，处处求变。坐落在黄浦江畔的上...

A new rhombohedral phase and its 48 variants inβtitanium alloy

A new rhombohedral phase(termed R′)in a solution-aging-treated titanium alloy(Ti-4.5Al-6.5Mo-2Cr-2Nb-1V-1Sn-1Zr,wt.%)was identified.Its accurate Bravais lattice parameters were determined by a novel unit cell reconstruction method based on conventional selected-area electron diffraction(SAED)technique.The orientation relationship between R'phase and BCC phase was revealed.The results show that the R′phase is found to have 48crystallographically equivalent variants,resulting in rather complicated SAED patterns with high-order reflections.A series of in-situ SAED patterns were taken along both low-and high-index zone axes,and all weak and strong reflections arising from the 48 variants were properly explained and directly assigned with self-consistent Miller indices,confirming the presence of the rhombohedral phase.Additionally,some criteria were also proposed for evaluating the indexed results,which together with the Bravais lattice reconstruction method shed light on the microstructure characterization of even unknown phases in other alloys.

Effect of flow stress—strain relation on forming limit of 5754O aluminum alloy

A modified Swift type flow stress—strain relation was presented in order to describe the uniaxial tension test curve reasonably. The FLD-strain （forming limit diagram made up of limit strain） of 5754O aluminum alloy sheet was calculated based on the two flow stress—strain relations using Yld2000-2d yield function. By comparing the theoretical and experimental results, it is found that the calculated FLD-strain based on the modified Swift flow stress—strain relation can reasonably describe the experimental results. However, though the common Voce flow stress—strain relation can describe the deformation behavior during homogenous deformation phase accurately, the FLD-strain calculated based on it is obviously lower than the experimental result. It is concluded that the higher the hardening rate of sheet metal is, the higher the forming limit is. A method for determining the reasonable flow stress—strain relation is recommended for describing the material behavior during inhomogenous phase and the forming limit of sheet metal.

Molecular dynamics study on temperature and strain rate dependences of mechanical tensile properties of ultrathin nickel nanowires

Based on the EAM potential, a molecular dynamics study on the tensile properties of ultrathin nickel nanowires in the （100〉 orientation with diameters of 3.94, 4.95 and 5.99 nm was presented at different temperatures and strain rates. The temperature and strain rate dependences of tensile properties were investigated. The simulation results show that the elastic modulus and the yield strength are gradually decreasing with the increase of temperature, while with the increase of the strain rate, the stress--strain curves fluctuate more intensely and the ultrathin nickel nanowires rupture at one smaller and smaller strain. At an ideal temperature of 0.01 K, the yield strength of the nanowires drops rapidly with the increase of strain rate, and at other temperatures the strain rate has a little influence on the elastic modulus and the yield strength. Finally, the effects of size on the tensile properties of ultrathin nickel nanowires were briefly discussed.

Intelligent method to develop constitutive relationship of Ti-6Al-2Zr-1Mo-1V alloy

The isothermal compression tests were carried out in the Thermecmastor-Z thermo-simulator at temperatures of 800, 850, 900, 950, 1000 and 1050 ℃ and the strain rates of 0.01, 0.1, 1 and 10 s-1. The influence of deformation temperature and strain rate on the flow stress of Ti-6Al-2Zr-IMo-IV alloy was studied. Based on the experimental data sets, the high temperature deformation behavior of Ti-6A1-2Zr-IMo-IV alloy was presented using the intelligent method of artificial neural network （ANN）. The results indicate that the predicted flow stress values by ANN model is quite consistent with the experimental results, which implies that the artificial neural network is an effective tool for studying the hot deformation behavior of the present alloy. In addition, the development of graphical user interface is implemented using Visual Basic programming language.

Case studies on testing with compositional metamorphic relations

Some metamorphic relations （MR） are not good at detecting faults in metamorphic testing. In this paper, the method of making compositional MR （CMR） based on the speculative law of proposition logic is presented. This method constructs new MRs by composing existing MRs in a pairwise way. Because CMR contains all the advantages of the MRs that form it, its fault detection performance is wonderful. On the other hand, the number of relations will decrease greatly after composing, so a program can be tested with much fewer test cases when CMRs are used. In order to research the characteristics of a CMR, two case studies are analyzed. The experimental results show that the CMR＇s performance is mostly determined by the central MRs forming it and the sequence of composition. Testing efficiency is improved greatly when CMRs are used.

Assessment of Genetic Variability and Inter-specific Relationships among Four Species of Groupers (Genus Epinephelus) from South China Sea Using Microsatellite Markers

[Objective] The study aimed to evaluate the genetic variability and interspecific relationships among four species of groupers from South China Sea, including E. fario, E. merra, E. malabaricus and E. coioides. [Method] Twenty one mircosatellite loci of groupers were selected from GenBank and eight high polymorphic loci were used to further genetic analysis. [Result] The mean number of alleles per locus （A）, effective number of alleles （Ne）, mean polymorphism information content （PIC）, observed heterozygosity （Ho） and expected heterozygosity （He） were 4.38±1.60, 3.69±0.86, 0.69±0.08, 0.67±0.08, 0.72±0.06 in E. malabaricus; 3.88±1.13, 3.55±1.04, 0.66±0.10, 0.68±0.21, 0.70±0.08 in E.coioides; 6.00±1.07, 4.68±0.65, 0.78±0.03, 0.73±0.25, 0.79±0.03 in E. fario; 5.50±1.07, 4.58±0.80, 0.76±0.05, 0.75±0.18, 0.78±0.04 in E. merra, respectively. [Conclusion] We compared the values above, the order of the genetic variability among these grouper species was E. fario E. merra E. malabaricus E. coioides. We found that the level of genetic variability of these groupers species was relatively higher than that of other marine fish, so their genetic status was good. In addition, the analyisis of genetic relationship showed that E. malabaricus and E. coioides was the closest and it was the farthest between E. merra and E. coioides.

ZERO-CURRENT AND ZERO-VOLTAGE SWITCHING PWM BOOST FULL-BRIDGE CON VERTER

This paper proposes a zer o current and zero voltage switching (ZCZVS) PWM Boost full bridge (FB) conve rter. With series inductors, the leading switches can realize zero current swit ching (ZCS) in a wide load range using the energy of the output capacitor. Ma king use of parasitic capacitors of the lagging switches and parallel auxiliary i nductance with the primary winding of the transformer, the lagging switches can realize zero voltage switching (ZVS) under any load. Compared with the ZCS PWM Boost FB converter, the new converter has no current duty cycle loss. Operat ional principle and parameter design are analyzed. Experimental results verify the effectiveness of the proposed converter.

The Content Variations of Main Nutrients in Storage Root Expanding Stages of Sweet Potato and Their Mutual Relationships

[Objective] The content variations of the main nutrients in storage root during expanding stages and their mutual relationships in orange-fleshed sweet pota-to （Ipomoea Batatas（L.） Lam） were studied in this paper. [Method] The dynamics of main nutritional ingredients in orange-fleshed sweet potato-variety at 40, 70, 100 and 125 days after transplanting were investigated, and these traits included the 6- carotene content, Fe content, Zn content, starch content, protein content, glucose content, fructose content, and sucrose content. The relationships among these nutri- ents were analyzed during whole developing stage. [Result] B-carotene content in the whole growth period showed straightly increasing firstly, and then decreasing trend, which was unimodal fluctuation curve. The variation tendency of protein con- tent was gently decreasing firstly and then ascending. The dynamics of starch con- tent was similar to l^carotene content, while the fluctuation was stable. The chang- ing curve of carbohydrate was opposite to starch, showing decreasing firstly and then ascending. Fe content was decreasing all the whole developing stage, falling fast and then slowing down. Moreover, Zn content was plummeting. The sucrose content in fresh storage root had significantly negative correlation with β-carotene content, and had positive correlation with fructose content. Starch content had significantly negative correlation with fructose content, and had positive correlation with Zn content. [Conclusion] These research conclusions could guide the variety to har- vest at suitable time, so as to achieve the aim of micronutrition improvement.

DESIGN OF A NOVEL NONLINEAR DISORETE-TIME CONTROLMETHOD FOR SWITOHING OONVERTERS

Based on the high frequency and large signal discrete-time model for switching converters,a nonlinear discrete-time control method is designed on the principle of dynamic programming. In one switch period the optimal duty ratio is got in accordance with a minimum error of the output voltage,then the duty ratio is checked and regulated with the energy function in order to make the global performance best. In thisway the complete objective function is obtained. Based on the objective function,the fast and accurate control effect is accomplished.

A NOVEL PHASE SHIFTED ZERO VOLTAGE SWITCHED PWM CONVERTER

Phase shifted converter realizes zero voltage switching (ZVS) with the use of leakage inductance of the main transformer, however, the realization of ZVS for lagging bridge leg is difficult. This paper proposes a current enhanced principle, and based on the principle, a novel phase shifted converter is proposed, which adds an auxi liary resonant net to the conventional full bridge converter to help the lagging bridge leg to realize ZVS. The principle and the design of the novel converter are analyzed, and the simulational and experimental results verify the principle.

A Novel Regulation Technique and Its Application to Design of Embedded SC DC-DC Converters

An optimized design of the monolithic switched capacitor DC-DC converter is presented.The general topologic circuit and its basic operating principles are discussed theoretically.Circuit equivalent resistance regulation method is proposed as a feasible method to design the on-chip converters.N-channel MOSFETs,instead of Schottky diodes,are used as the diodes in the converters because of their processing compatibility in monolithic fabrication.One more manufacture step,however,is expected to adjust the threshold voltage of the MOSFETs for improving output characteristics of the converters.As an example,a step-up switched-capacitor converter is fabricated in a 2μm p-well double-poly single-metal CMOS technology with breakdown voltage of 15V.Test results indicate that a single sampling cell with 0.4mm 2 of die size can deliver energy up to 0.63mW at 5V output under the condition of 3V input.Efficiency of the tested sample is 68% at 9.8MHz switching frequency...

Rugged Resonant Pole and Its Applications in Soft-Switching Converter

The soft switching operation principle and operation performance of rugged resonant pole (RRP) is given. The applications of RRP in soft switching DC DC converter and soft switching inverter are discussed in detail. RRP can constitute buck boost soft switching DC DC converter and isolated soft switching DC DC converter with the automatic limitation performance of output power. Partial series resonant DC DC converter with RRP can realize the zero voltage/zero current switching of power devices. RR...

变卖资产——企业筹资新渠道

目前,一些企业普遍感到筹资困难,认为发行股票、债券受条件限制;靠内部积累又不能满足需要,以致企业资金主要来源靠银行贷款,在扩大企业理财自主权之后,企业可以在保证国有资产保值增值的条件下,自主使用和处置资产,包括变卖、转让和抵押。资产变卖可拓宽企业的筹资渠道,在一定程度上缓解企业资金紧缺的矛盾。

Soft-switching PWM boost full-bridge converter

This paper proposes a family of PWM modulation strategies for boostfull-bridge (FB) converters. The modulation strategies can be classified into two kinds according tothe turn-on sequence of the diagonal switches. The concept of leading switches and lagging switchesis introduced to realize soft-switching. According to the soft-switching realized by the leadingswitches and the lagging switches, two kinds of soft-switching techniques for PWM boost FBconverters yield: zero-current-switching (ZCS) and zero-current and zero-voltage-switching (ZCZVS).Simulation results verify the analysis.

Dynamic Analysis on Organic Matter and Nitrogen Pollution of Dongchang Lake

The aim was to explore dynamic changes of organic matter and nitrogen pol ution in Dongchang Lake. [Method] Monitoring data, including BOD5, CODCr, NH3-N and TN, of Dongchang Lake were chosen for analysis during 2002-2011. [Result] Water quality of the six lake districts showed deteriorating in monitor-ing period, and TN was the dominant pol ution factor; BOD5/CODCr ratio was low, suggesting biodegradability of organic pol utant in the lake was lower. NH3/TN ratio was higher, indicating NH3-N was a major factor causing nitrogen exceeding in 2010. In addition, correlations between BOD5 and CODCr and between NH3-N and TN in the lake districts maintained at a significant level. [Conclusion] The research provides references for improving water in Dongchang Lake.

Response of Ecosystem Service Value Based on Land Use Changes and Analysis of its Driving Factors in Typical Hilly Region with Red Soil

The contribution rate of ecosystem service value variation was used to analyze the effects of land use changes on the changes of ecosystem service value in Xingguo County during 1996-2005.Grey integrated correlation was employed to explore the contribution level of the indicators such as total population,urbanization level,proportion of primary industry and investment of social fixed assets on ecosystem service value,and the correlation analysis was also carried out.The results showed that the ecosystem service value in Xingguo County during 1996-2005 mainly was woodland,and the decrease of woodland area was the major reason for the sustained reduction of ecosystem service value.With the further increase of market demand and the incentives of local government,the garden area rapidly increased during 2001-2005,and the influence degree of garden towards the changes of ecosystem service value was only second to woodland,ranking No.2.Four socio-economic indicators had different correlation degree with ecosystem service value during the different research periods.Total population,urbanization level and proportion of primary industry had high correlation degree with ecosystem service value,whereas the influence degree of various socio-economic indicators on ecosystem service value was equal with each other day by day.Urbanization level,investment of social fixed assets and total population had significant negative correlation with ecosystem service value,while the proportion of primary industry had positive correlation with ecosystem service value.

Impact analysis of supplier relationship on supply chain resilience using biological cellular resilience theory

A supply chain resilience model is established based on the biological cellular resilience theory to analyze the impact of the supplier relationship on supply chain resilience. A scenario where the market demand is changed suddenly by some undesired events is considered. The results reveal that enhancing collaboration with a more resilient supplier can significantly improve supply chain resilience and reduce supply chain losses. It is also found that enhancing the supplier relationship can significantly benefit supply chain resilience if the collaborative intensity is relatively low, and it has less effect if supply chain members have already collaborated closely. Thus, enhancing the supplier relationship to a limited intensity is a relatively effective and economic method to strengthen supply chain resilience.

Research on 1-3 Orthogonal Anisotropic Piezoelectric Composite Material Sensors-

Piezoelectric composite material (PCM) is an important branch of modernsensor and actuator materials with wide applications in smart structures. In this paper, based onpiezoelectric ceramic, composite and experimental mechanics theories, a kind of 1-3 orthogonalanisotropic PCM (OAPCM) sensor is developed, and the sensing principle is analyzed to describesensor behaviors. In order to determine strain and stress on isotropic or orthogonal anisotropiccomponent surface, the relationships between strain and stress are established. The experimentalresearch on 1-3 OAPCM sensor is carried out in uniaxial and biaxial stress states. The results showthat 1-3 OAPCM sensors offer orthotropic properties of piezoelectricity, and sensing equations canbe used for strain or stress measurement with good accuracy.

Analysis of Genetic Variation and Population Structure of Starch Synthesis-related Genes in Indica Rice Cultivars

In this study, 34 molecular markers of starch synthesis-related genes were used to evaluate the genetic variation and population structure of 87 indica rice cultivars from different countries and regions. The results showed that a total of 80 alleles were amplified using 34 primer pairs, with an average of 2.5 alleles per locus. The allele number varied from 2 to 6 among various cultivars. Shannon＇s diversity index of molecular markers varied from 0.303 to 0.796, with an average of 0.539. Polymorphism information content （PIC） varied from 0.084 to 0.658, with an average of 0.295. The genetic similarity coefficients of 87 indica rice cultivars ranged from 0.265 to 0.990, indicating significant genetic differences of starch synthesis-related genes among different cultivars, but the variation frequency of alleles varied among different cultivars. Population structure analysis showed that these 87 indica rice cultivars were divided into three categories. Genetic differences were small within the same category but great among different categories. Moreover, indica rice cultivars with simple genetic components accounted for 39.1% and those with complex genetic background accounted for 60.9%. This study may not only provide theoretical basis for genetic improvement of rice starch quality, but also lay a solid foundation for subsequent association analysis of rice quality-related traits.