大机组起停车状态在线监测方法研究

在大机组起停车过程中，影响转子动力行为的因素众多，工况难以把握．为此，基于信息熵提出了一个机组起停车过程转子运行状态的评估指标，并在此基础上，为实现机组运行故障早期预诊的目的，进而基于Ｊ散度及多参数评估理论，提出了信号频谱结构分布散度的概念，以描述实测信号与机组典型故障信号间的伪空间距离，从而实现了机组运行故障的初步预诊．上述方法计算简捷，在线实现能力强，评估、预诊结果可靠，可适用于机组起停车等任何机组变工况运行过程．

Impact of correlated private signals on continuous-time insider trading

A model of continuous-time insider trading in which a risk-neutral in-sider possesses two imperfect correlated signals of a risky asset is studied.By conditional expectation theory and filtering theory,we first establish three lemmas:normal corre-lation,equivalent pricing and equivalent profit,which can guarantee to turn our model into a model with insider knowing full information.Then we investigate the impact of the two correlated signals on the market equilibrium consisting of optimal insider trading strategy and semi-strong pricing rule.It shows that in the equilibrium,(1)the market depth is constant over time;(2)if the two noisy signals are not linerly correlated,then all private information of the insider is incorporated into prices in the end while the whole information on the asset value can not incorporated into prices in the end;(3)if the two noisy signals are linear correlated such that the insider can infer the whole information of the asset value,then our model turns into a model with insider knowing full information;(4)if the two noisy signals are the same then the total ex ant profit of the insider is increasing with the noise decreasing,while down to O as the noise going up to infinity;(5)if the two noisy signals are not linear correlated then with one noisy signal fixed,the total ex ante profit of the insider is single-peaked with a unique minimum with respect to the other noisy signal value,and furthermore as the noisy value going to O it gets its maximum,the profit in the case that the real value is observed.

Alignment Techniques in Total Knee Arthroplasty:Where do We Stand Today?

Achieving optimal alignment in total knee arthroplasty(TKA) is a critical factor in ensuring optimal outcomes and long-term implant survival. Traditionally, mechanical alignment has been favored to achieve neutral postoperative joint alignment. However, contemporary approaches, such as kinematic alignments and hybrid techniques including adjusted mechanical, restricted kinematic, inverse kinematic, and functional alignments, are gaining attention for their ability to restore native joint kinematics and anatomical alignment, potentially leading to enhanced functional outcomes and greater patient satisfaction. The ongoing debate on optimal alignment strategies considers the following factors: long-term implant durability, functional improvement, and resolution of individual anatomical variations. Furthermore, advancements of computer-navigated and robotic-assisted surgery have augmented the precision in implant positioning and objective measurements of soft tissue balance. Despite ongoing debates on balancing implant longevity and functional outcomes, there is an increasing advocacy for personalized alignment strategies that are tailored to individual anatomical variations. This review evaluates the spectrum of various alignment techniques in TKA, including mechanical alignment, patient-specific kinematic approaches, and emerging hybrid methods. Each technique is scrutinized based on its fundamental principles, procedural techniques, inherent advantages, and potential limitations, while identifying significant clinical gaps that underscore the need for further investigation.

The Application of Pearson Correlational Analysis Method in Air Quality Analysis of Beijing-Tianjin-Hebei Region

Based on the analysis of monitoring data on six pollution indexes of SO2, NO2, CO, O3, PM10 and PM2.5 from 53 monitoring points in 7 cities, including Beijing, Tianjin, Shijiazhuang, etc., from April 8 of 2014 to July 23 of 2014, this article adopted Pearson correlation coefficient method to determine the relevance among each pollutant of these cities with the help of SPSS. The results showed that such three leading indexes as SO2, PM10 and PM2.5 had strong correlation in Beijing, Tianjin and main cities of Hebei. Finally, some suggestions and preventive measures for the cooperative governance of air pollution in Beijing-Tianjin-Hebei Region were put forward, hoping this can help them.

The Phylogenetic Relationships among Four Subspecies of the Genus Locusta Based on Sequences of Three Subunit of Cytochrome Oxidase

[Objective] The aim was to explore the phylogenetic relationships among four subspecies of the genus Locusta.[Method] The sequences of three subunits of cytochrome oxidase of Locusta migratoria tibetensis and Locusta migratoria manilensis were amplified and sequenced（COⅠ 1 539 bp,COⅡ 684 bp,CO Ⅲ 792 bp,with the total of 3 015 bp）.The corresponding sequenses of Locusta migratoria migratoria and Locusta migratoria migratorioides were obtained from GenBank and constructed a multiple alignment.Phylogenic trees of four subspecies of L.migratoria were constructed by Neighbor-Joining,Maximum-parsimony and Bayesian,respectively.[Result] The average content of A ＋ T in three subunits of four subspecies was 69.57%;the third site of codon showed the highest A ＋ T content,and the COⅠ had the highest A ＋ T content（87.6%）;The nucleotide substitution mainly occurred at the third site of codon,and the nucleotide replacement rate of CO Ⅱ was the highest.The second site of codon was conservative,so the replacement rate was in the range of 5.9%-15%.The start codon of COⅠ was CCG or ACG.Genetic distances among four subspecies were ranged from 0.001 to 0.076.The relationship between L.m.tibetensis and Locusta migratoria manilensis was the closest,followed by L.m.migratorioides and L.m.migratorioides,while the genetic distance between L.m.tibetensis and L.m.migratorioides was the largest.[Conclusion] The phylogenetic relationships among four subspecies of Locusta migratoria is L.m.tibetensis,L.m.manilensis,L.m.migratoria,L.m.migratorioides.

Research on large-scale cascading failure of power systems using synergistic effect

This paper discusses the primary causes from the point of synergistic effects to improve power system vulnerability in the power system planning and safety operation. Based on the vulnerability conception in the complex network theory the vulnerability of the power system can be evaluated by the minimum load loss rate when considering power supply ability.Consequently according to the synergistic effect theory the critical line of the power system is defined by its influence on failure set vulnerability in N-k contingencies.The cascading failure modes are proposed based on the criterion whether the acceptable load curtailment level is below a preset value.Significant conclusions are revealed by results of IEEE 39 case analysis weak points of power networks and heavy load condition are the main causes of large-scale cascading failures damaging synergistic effects can result in partial failure developed into large-scale cascading failures vulnerable lines of power systems can directly lead the partial failure to deteriorate into a large blackout while less vulnerable lines can cause a large-scale cascading failure.

Support vector machine for prediction of siRNA silencing efficacy

In order to assist the design of short interfering ribonucleic acids （siRNA）, 573 non-redundant siRNAs were collected from published literatures and the relationship between siRNAs sequences and RNA interference （RNAi） effect is analyzed by a support vector machine （SVM） based algorithm relied on a basebase correlation （BBC） feature. The results show that the proposed algorithm has the highest area under curve （AUC） value （0. 73） of the receive operating characteristic （ROC） curve and the greatest r value （0. 43） of the Pearson＇s correlation coefficient. This indicates that the proposed algorithm is better than the published algorithms on the collected datasets and that more attention should be paid to the base-base correlation information in future siRNA design.

Vector Correlations and Product Rotational Alignments of Reactions Ca+RBr→CaBr+R(R=CH_(3),C_(2) H_(5) and n-C_(3) H_(7))

The quasiclassical trajectory method is used to study the vector correlations of the reactions Ca＋RBr （R=CH3, C2H5 and n-C3H7Br） and the rotational alignment of product CaBr. The product rotational alignment parameters at different collision energies and the vector correlations between the reagent and product are numerically calculated. The vector correlations are described by using the angle distribution functions P（θr）, P（φr）, P（θr, φr） and the polarization-dependent differential cross sections （PDDCSs）. The peak values of P（θr） of the product CaBr from Ca＋CH3Br are larger than those from Ca＋C2H5Br and Ca＋n-C3H7Br. The peak of P（θr） at φr= 3π/2 is apparently stronger than that at φr= x/2 for the three reactions Ca＋RBr. The calculation results show that the rotational angular momentum of the product CaBr is not only aligned, but also oriented along the direction which is perpendicular to the scattering plane.The product CaBr molecules are strongly scattered forward. The orientation and alignment of the product angular momentum will affect the scattering direction of the product molecules to varying degrees.

Polymerization Mechanism of α-Linear Olefin

The density functional theory on the level of B3LYP/6-31G was empolyed to study the chain growth mechanism in polymerization process of α-linear olefin in TiCl3/AlEt2Cl catalytic system to synthesize drag reduction agent. Full parameter optimization without symmetry restrictions for reactants, products, the possible transition states, and intermediates was calculated. Vibration frequency was analyzed for all of stagnation points on the potential energy surface at the same theoretical level. The internal reaction coordinate was calculated from the transition states to reactants and products respectively. The results showed as flloes： （i） Coordination compounds were formed on the optimum configuration of TiCl3/AlEt2Cl.（ii） The transition states were formed. The energy di？erence between transition states and the coordination compounds was 40.687 kJ/mol. （iii） Double bond opened and Ti-C（4） bond fractured, and the polymerization was completed. The calculation results also showed that the chain growth mechanism did not essentially change with the increase of carbon atom number of α-linear olefin. From the relationship between polymerization activation energy and carbon atom number of the α-linear olefin, it can be seen that the α-linear olefin monomers with 6-10 carbon atoms had low activation energy and wide range. It was optimum to synthesize drag reduction agent by polymerization.

Variation of microfibril angle and its correlation to wood properties in poplars

The microfibril angle of seven poplar clones was determined by using X-ray diffraction technique. Microfibril angle, wood basic density, fiber length, fiber width and cellulose content were assessed for every growth ring at breast height for all sample trees. Significant variation in microfibril angle was observed among growth rings. Mean microfibril angle (MFA) at breast height varied from 7.8?to 28?between growth rings with cambial age and showed a consistent pith-to-bark trend of decline an-gles. Analysis of variance also indicated that there were significant differences in wood basic density, fiber length, fiber width and cellulose content between the growth rings, which had an increasing tendency from pith to bark. Correlations between MFA and examined wood properties were predominantly large and significant negative (?0.01), and the coefficients were -0.660 for cellulose content, -0.586 for fiber length, -0.516 for fiber width and -0.450 for wood basic density, respectively. Regression analysis with linear and curve estimation indicated that a quadratic function showed the largest R2 and the least standard error for describing the relationships between microfibril angle and measured wood properties, and the correlation coefficients were over -0.45 (n=125). The results from this study suggested that microfibril angle would be a good characteristic for improvement in the future breeding program of poplars.

A Novel Sampling Switch Suitable for Low-Voltage Analog-to-Digital Converters

A novel, highly linear sampling switch suitable for low-voltage operation is proposed. This switch not only eliminates the nonlinearity introduced by gate-source voltage variation, but also reduces the nonlinearity resuiting from threshold voltage variation, which has not been accomplished in earlier low-voltage sampling switches. This is achieved by adopting a replica transistor with the same threshold voltage as the sampling transistor. The effectiveness of this technique is demonstrated by a prototype design of a sampling switch in 0. 35μm. The proposed sampling switch achieves a spurious free dynamic range of 111dB for a 0. 2MHz, 1.2Vp-p input signal, sampled at a rate of 2MS/s,about 18dB over the Bootstrapped switch. Also, the on-resistance variation is reduced by 90%. This method is especially useful for low-voltage, high resolution ADCs, which is a hot topic today.

Automobile light control system based on CAN bus and contactless switch

In order to solve the complex wiring and low reliability of conventional light control system,an automobile contactless switch light system is designed combined with Hall element and controller area network （CAN） bus technology.The processing system of electromagnetic compatibility controlled by CAN bus is improved to reduce the electromagnetic interference from the controller and other sources of interference.With Freescale＇s high-performance single-chip MC9S08DZ60 and CAN transceiver TJA1050,the overall circuit design and software design are presented.The test results show that the designed light control system is feasible.

Transient Characteristics of a Nonlinear GaAs Photoconductive Semiconductor Switch

The transient resistance,voltage,and power of a nonlinear GaAs photoconductive semiconductor switch （PCSS） are presented by the finite difference formula to deal with the experiment data, based on the conversation of energy in the switch circuit. This method resolves the problem of directly measuring the transient characteristics of PCSS in nonlinear mode. The curve of transient voltage shows that the average electric field of PCSS in the lock-on period is always higher than the Gunn threshold,and increases monotonically. By comparing the transient power curves of the PCSS and the electrical source,it is demonstrated directly that the power shortage leads to the PCSS from the lock-on state into the selfturnoff state,so a controllable turnoff of the PCSS in lock-on by changing the distribution of the circuit power is predicted.

Decentralized Control Based on FNNSMC for Interconnected Uncertain Nonlinear Systems

A new type controller, fuzzy neural networks sliding mode controller (FNNSMC), is developed for a class of large scale systems with unknown bounds of high order interconnections and disturbances. Although sliding mode control is simple and insensitive to uncertainties and disturbances, there are two main problems in the sliding mode controller (SMC): control input chattering and the assumption of known bounds of uncertainties and disturbances. The FNNSMC, which incorporates the fuzzy neural networks (FNN) and the SMC, can eliminate the chattering by using the continuous output of the FNN to replace the discontinuous sign term in the SMC. The bounds of uncertainties and disturbances are also not required in the FNNSMC design. The simulation results show that the FNNSMC has more robustness than the SMC.

Molecular dynamics study on temperature and strain rate dependences of mechanical tensile properties of ultrathin nickel nanowires

Based on the EAM potential, a molecular dynamics study on the tensile properties of ultrathin nickel nanowires in the （100〉 orientation with diameters of 3.94, 4.95 and 5.99 nm was presented at different temperatures and strain rates. The temperature and strain rate dependences of tensile properties were investigated. The simulation results show that the elastic modulus and the yield strength are gradually decreasing with the increase of temperature, while with the increase of the strain rate, the stress--strain curves fluctuate more intensely and the ultrathin nickel nanowires rupture at one smaller and smaller strain. At an ideal temperature of 0.01 K, the yield strength of the nanowires drops rapidly with the increase of strain rate, and at other temperatures the strain rate has a little influence on the elastic modulus and the yield strength. Finally, the effects of size on the tensile properties of ultrathin nickel nanowires were briefly discussed.

A Decorrelating DOA Estimation Based on the Principal Eigenvector for CDMA Frequency-Selective Fading Channels

A novel decorrelating DOA estimation algorithm of multipath signals for CDMA frequency selective fading channels based only on the principal eigenvector of its corresponding covariance matrix is proposed. The proposed algorithm has the advantages that the DOAs of the multipath signals can be estimated independently and all the other resolved multipath signal interference is eliminated. Simulation results show that this algorithm estimates the DOAs of multipath signals efficiently and accurately.

Isotopic Effects on Stereodynamics for Ca＋HCI, Ca＋DCI, and Ca＋TCl Reactions

The vector correlations in Ca＋HCl, Ca＋DCl, and Ca＋TCl reactions have been investigated by means of the quasi-classical trajectory calculations on PES constructed by means of multireference configuration interaction. The distributions of P（θr）, P（Фr） and the PDDCSs of （2π/σ）（dσ00/dωt）, （2π/σ）（dσ20/dωt）, （2π/σ）（dσ22＋/dωt）, （2π/σ）（dσ21-/dωt） have been calculated based on the surface. The remarkable isotopic effects in the reactions are observed, and the mechanism which may be ascribed to different mass factors is discussed.

宁波|看不懂城市发展逻辑，你就输了

知乎上曾看到一个高赞帖:假如我爷爷或太爷爷当年去北京奋斗,那我现在就不是苦逼'北漂'了,而是坐拥好几套房的北京爷们了.网友们纷纷跟帖做白日梦:假如我爷爷当年参加了红军的话;假如我爹当年钻深圳'二关线'狗洞去关内的话……

DESIGN OF A NOVEL NONLINEAR DISORETE-TIME CONTROLMETHOD FOR SWITOHING OONVERTERS

Based on the high frequency and large signal discrete-time model for switching converters,a nonlinear discrete-time control method is designed on the principle of dynamic programming. In one switch period the optimal duty ratio is got in accordance with a minimum error of the output voltage,then the duty ratio is checked and regulated with the energy function in order to make the global performance best. In thisway the complete objective function is obtained. Based on the objective function,the fast and accurate control effect is accomplished.

Nonlinear Auto-Companding Method for Behavioral Modeling of Switched-Current Circuits

A wavelet collocation method with nonlinear auto companding is proposed for behavioral modeling of switched current circuits.The companding function is automatically constructed according to the initial error distribution obtained through approximating the input output function of the SI circuit by conventional wavelet collocation method.In practical applications,the proposed method is a general purpose approach,by which both the small signal effect and the large signal effect are modeled in a unified formulation to ease the process of modeling and simulation.Compared with the published modeling approaches,the proposed nonlinear auto companding method works more efficiently not only in controlling the error distribution but also in reducing the modeling errors.To demonstrate the promising features of the proposed method,several SI circuits are employed as examples to be modeled and simulated.