期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
带内冷孔直槽丝锥的设计与应用
1
作者 刘海涛 孟漪 杨仕成 《金属加工(冷加工)》 2023年第12期55-58,共4页
灰铸铁HT280材料柴油发动机缸体螺纹孔具有难加工的特性。为有效改善直槽丝锥在加工缸体螺纹孔时出现易磨损、易烂牙、使用寿命短和表面粗糙度值高等问题,设计了一款带内冷孔的直槽丝锥,对丝锥关键参数进行了设计,并做了切削寿命试验。... 灰铸铁HT280材料柴油发动机缸体螺纹孔具有难加工的特性。为有效改善直槽丝锥在加工缸体螺纹孔时出现易磨损、易烂牙、使用寿命短和表面粗糙度值高等问题,设计了一款带内冷孔的直槽丝锥,对丝锥关键参数进行了设计,并做了切削寿命试验。试验结果表明:带内冷孔的直槽丝锥在加工灰铸铁HT280材料柴油发动机缸体螺纹孔时,能有效解决丝锥易磨损、易烂牙、使用寿命短和表面粗糙度值高等问题。 展开更多
关键词 灰铸铁 直槽丝锥 槽形 内冷孔
下载PDF
可转位浅孔钻螺旋内冷孔的加工工艺
2
作者 孟漪 姚佳维 《工具技术》 北大核心 2022年第7期119-121,共3页
可转位浅孔钻的刀杆采用螺旋内冷孔设计,通过对螺旋内冷孔加工工艺展开讨论,采用高频加热扭制成型工艺对刀杆进行加工,实现带螺旋内冷孔浅孔钻刀杆的小批量生产。
关键词 螺旋槽 内冷孔 高频加热 扭制工艺
下载PDF
基于CFD的直槽钻冷却通道流场仿真分析
3
作者 左小陈 邓小野 曾滔 《制造技术与机床》 北大核心 2018年第5期101-105,共5页
建立了直槽钻冷却通道流场的CFD仿真模型,对不同油孔结构直槽钻加工的冷却效果进行了数值模拟和试验验证。结果表明:在一定条件下,内冷孔孔径越大,油孔圆心连线与前刀面夹角越小的结构冷却效果越好,反之,冷却效果越差。
关键词 直槽钻 CFD 内冷孔
下载PDF
Cooling of Superheated Refrigerants Flowing inside Tubes Filled with Porous Media: Study of Heat Transfer and Pressure Drop, Carbon Dioxide Case Study 被引量:1
4
作者 M. Hammad A.S. Alshqirate M. Tarawneh 《Journal of Energy and Power Engineering》 2011年第9期802-810,共9页
In this work an experimental study combined with an analytical investigation for cooling superheated Carbon Dioxide (CO2) gas were carried out. This work is intended to be part of the super critical Gustav Lorentzen... In this work an experimental study combined with an analytical investigation for cooling superheated Carbon Dioxide (CO2) gas were carried out. This work is intended to be part of the super critical Gustav Lorentzen refrigeration cycle of CO2. Experimental and analytical works concentrated on heat transfer and pressure drop for single phase flow during gas cooling inside tubes filled with porous media. Analytical empirical correlations were formulated for the coefficient of convectional heat transfer and for the pressure drop. A comparison between experimental results and that obtained by developed correlations were carried out, and a comparison between these results and literature published ones were carried out too. The results of this research showed that for cooling process the proposed correlations were proved to be acceptably accurate for pressure drop with difference from experimental results of 2%, while for convective heat transfer the difference from experimental results reached about 3%. More than 90% agreement with literature results was obtained. This work can enhance the calculations of heat flux and pressure drop of gases flow inside porous media filled tubes, and can help in the design procedure of heat exchangers and cooling processes. 展开更多
关键词 COOLING porous media convection heat transfer pressure drop R744.
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部