大学生社会主义核心价值观内化分析

大学生的价值取向既是当今社会价值取向的"晴雨表",又是未来社会价值取向的"风向标"。对大学生社会主义核心价值观内化的阶段性演变过程进行相关的分析,具有一定的理论和现实意义。树立高度的理论自信是内化的首要前提;个人价值观的建立是内化的关键阶段;将核心价值观外化为自觉行为是内化的落脚点。

High Performance Liquid Chromatography-Electrospray Ionization-Mass Spectrometric Analysis of Bilobalide and Ginkgolides in Ginkgo biloba L. Leaves

The ginkgo terpenoids including bilobalide and ginkgolides are the main pharmaceutical components in the leaves or extracts of Ginkgo biloba L. In this paper, the analysis of bilobalide and ginkgolides in leaves of Ginkgo biloba L. by high performance liquid chromatography (HPLC)-electrospray ionization (ESI)-mass spectrometry (MS) was carried out. The separation was performed on Inertsil ODS3 column with methanol-water (36:64) as mobile phase, with 1 mL·min -1 of flow rate at 35℃. Then the mass spectrum analysis was conducted by ZMD micromass electrospray ionization (ESI)-mass spectrometer (MS). The HPLC total ion chromatogram and selected ion chromatogram (with 325, 407, 423, 439 of m/z) of the sample and ESI-/MS mass spectra of the peaks in the chromatograms were obtained. So bilobalide, ginkgolide A, B, C and J in Ginkgo biloba L. leaves were identified. The method is easy and rapid, with a good accuracy.

Effect of BSA on RAPD Analysis of Cynomorium songaricum

[Objective] The objective of the study was to study the role played by BSA in Random Amplified polymorphic DNA(RAPD).[Method]The improvement of RAPD amplification was observed by adding BSA in the analysis of Cynomorium songaricum RAPD.[Result] The result showed that in the process of Cynomorium songaricum RAPD analysis,the effect of amplification improved significantly and the dosage of Taq enzyme declined by adding BSA.The suitable concentration of BSA used in RAPD of Cynomorium songaricum Rupr was 2 μg/μl.[Conclusion]It is feasible to add BSA to improve the RAPD analysis of plants.This study has provided foundation for the application of BSA in RAPD analysis.

Catenary action of restrained steel beam against progressive collapse of steel frameworks

The changing law of internal forces during the whole deformation development process was analyzed. The process was divided into five stages based on the internal force state of the beam and the assumptions of internal force relationship of five stages were proposed. Then, the formulas for determining the midspan deflection of the steel beam under distributed load, which was restrained both in rotational and axial directions, were obtained using restraint coefficient method and rigid-plastic mechanism, thereby the deformation development process was expressed accurately in a quantified way. Priority was given to the analysis of the process from bending to tension-bending, then the final state totally depends on tension to resist the external loads, that is the problem of catenary action of the restrained beam under distributed load. Additionally, finite element analysis was carried out with soitware ABAQUS6.7 on a restrained steel beam under distributed load with different axial and rotational restraint coefficients. The accuracy of the formulas presented was verified by the results of the behavior of the restrained beams. Finally, error analysis was conducted and some formulas were corrected according to the reasons of errors. The calculated results of corrected formulas match the FEM analysis results better, thus the accuracy of these formulas is improve .

Indoor Particle Contamination in Airlaid Papermaking Workshop

An onsite testing based on eight-site air sampling was carried out in an airlaid papermaking workshop in Tianjin, China. By theoretical calculation, super absorbent polymer （SAP） size and its existent state in indoor static airflow were obtained. SAP content in the sampled air was tested through chemical analysis method and found to be 3.0-7.2 times that of the human health limit in production areas. The concentrations of total suspending particles （TSP） and respirable particles were achieved by weighing. Particles of the most concern differ for varied function areas. Particles smaller than 10μm are mostly produced in the main production process, and 73%-90% particles generated in packing areas are larger than 10μm. SAP raw material particles can easily changed to suspending form by inevitable extrusion and frication. Correlation between respirable particles and TSP agrees well with that in atmospheric environment.

Crushing analysis and multiobjective crashworthiness optimization of bitubular polygonal tubes with internal walls

In order to reduce casualties and property losses in a collision accident, thin-walled structure has been extensively used as energy absorber in crashworthiness design of train. With the help of energy absorber, collision kinetic energy can be controllably dissipated by the plastic deformation of structures. A new kind of multi-cell thin-walled structure called as bitubular polygonal tubes with internal walls(BPTIW) was constructed. The crashworthiness characteristics of BPTIWs were investigated by LS-DYNA. It can be found that the BPTIW with 12 sides has the most excellent crashworthiness characteristics. Therefore, based on response surface method(RSM) and multiobjective particle optimization(MOPSO) algorithm, the BPTIW with 12 sides was selected to optimize the dimensions of cross-sectional configuration under different constraints of energy absorption(EA) and crushing peak force(CPF). The results show that the optimal designs of BPTIW12 under different constraints present excellent crashworthiness characteristics and can be used in the practical engineering.

The Application of Computer Simulation Technology in Building Design

From the simulation software selection, meteorological data collection, model, boundary conditions, calculation setting and evaluation indicators, the paper summarize simulation method of wind, light and sound, summarize three kinds of environmental. The paper study on optimization analysis method of green building from four aspects of building orientation, architectural form, architectural layout and indoor environment, and puts forward the optimization scheme of the typical simulation analysis of simple questions; provide guidance for optimizing the design of green building. Finally, ECOTECT can adapt to the current domestic engineering design and consulting on green building simulation and design requirements, and has a broad application prospect.

Research fit under the ＂China Dream＂ background Chinese Wushu industry and traditional culture

In this paper, the author uses literature data and logical analysis in the ＇,China Dream＂ background and discusses the opportunities and challenges of Chinese Wushu industry. The author points out that China＇s development should be directed to the development of the fusion of traditional Chinese culture, to help China establish an energetic, self-improvement image and the pursuit of harmony and common prosperity. The image of peaceful rise of a big country enhances China＇s international status and influence Martial Arts and Martial industrial development should focus on the rich cultural connotations, tap the cultural symbol it could develop, build martial arts industry brands through various media channels, government support and other ways to expand the widest range of consumer groups, and expand development of martial arts industry

Analysis of Internal Cooling Geometry Variations in Gas Turbine Blades

The present investigation analyzes the effects of major geometrical modifications to the interior of a convectioncooled gas turbine rotor blade. The main focus lies on the flow of the leading edge channels and the impact on theheat transfer. An experimental approach is performed with flow visualization via paint injection into water. Alsonumerical calculations are carried out in two sets, on the one hand water calculations accompanying the experimentsand on the other hand conjugate heat transfer calculations under realistic engine conditions. The latter calculationsare still ongoing delivering preliminary results.Five geometry configurations are investigated, three of them with differing turbulator arrangements in the leadingedge channels. The operating point of the base configuration is set to Re = 50,000 at the inlet while for the modifiedgeometries the pressure ratio is held constant compared to the base.Among several investigated configurations one could be identified that leads to a heat transfer enhancement inone leading edge channel 7 % larger compared to the base.

Risk analysis of new oral anticoagulants for gastrointestinal bleeding and intracranial hemorrhage in atrial fibrillation patients:a systematic review and network meta-analysis

Background： Antithrombotic therapy using new oral anticoagulants （NOACs） in patients with atrial fibril- lation （AF） has been generally shown to have a favorable risk-benefit profile. Since there has been dispute about the risks of gastrointestinal bleeding （GIB） and intracranial hemorrhage （ICH）, we sought to conduct a systematic review and network meta-analysis using Bayesian inference to analyze the risks of GIB and ICH in AF patients taking NOACs. Methods： We analyzed data from 20 randomized controlled trials of 91 671 AF patients receiving anticoagulants, antiplatelet drugs, or placebo. Bayesian network meta-analysis of two different evidence networks was performed using a binomial likelihood model, based on a network in which different agents （and doses） were treated as separate nodes. Odds ratios （ORs） and 95% confidence intervals （CIs） were modeled using Markov chain Monte Carlo methods Results： Indirect comparisons with the Bayesian model confirmed that aspirin＋clopidogrel significantly increased the risk of GIB in AF patients compared to the placebo （OR 0.33, 95% CI 0.01-0.92）. Warfarin was identified as greatly increasing the risk of ICH compared to edoxaban 30 mg （OR 3.42, 95% CI 1.22-7.24） and dabigatran 110 mg （OR 3.56, 95% CI 1.10-8.45）. We further ranked the NOACs for the lowest risk of GIB （apixaban 5 mg） and ICH （apixaban 5 mg, dabigatran 110 mg, and edoxaban 30 mg）. Conclusions： Bayesian network meta-analysis of treatment of nonvalvular AF patients with anticoagulants suggested that NOACs do not increase risks of GIB and/or ICH, compared to each other.

Relations between the BRICS： A Reflection from a Brazilian Sociological Viewpoint

The emergence of Brazil, Russia, India, China and South Africa （the BRICS） poses important challenges to social scientists in these five countries. Increasing contact among the BRICS countries is resulting in greater awareness of differences. Conflicts among them are inevitable. This paper focuses upon the relations between social actors from the BRICS countries, and is written from a Brazilian perspective. After a brief examination of the BRICS concept and a review of some contemporary challenges to sociological research and visions of globalisation, the paper will examine three distinct dimensions of relations between BRICS partners in a globalising world： supra-national organisation, economic and cultural exchanges（ Wieviorka 2008 ）. The key assumption of this paper is that it is necessary to build research agenda that can help develop sociological knowledge and provide a basis for building mutual understanding of the diverse forms of social interaction produced when actors from these countries enter into contact with each other. For example, increasingly cultural content produced in each of the BRICS is transmitted to others, the study of how such content is received and incorporated into the world views of different categories of receivers, especially youth, appears as a fertile area for study. The analysis of emergent conflicts is also an area to which sociological analysis can make an important contribution. As the BRICS develop, meaningful dialogue becomes both a value and a necessity. The aim of the paper is to structure a research agenda for the new times.