Preparation and properties of biodegradable bamboo powder/polycaprolactone composites

The bamboo powder/polycaprolactone composites (BPPC) were prepared by torque-rheometer to investigate the effects of recipes and processing conditions on the rheological properties of BPPC. The morphological behavior and mechanical properties of BPPC were also studied. Results showed that the optimum recipe for composite materials is composed of 70% of polycaprolactone, 30% of bamboo powder according to volume, 1.6 % of aluminate coupling agent, 1.2% of stearic acid, and 2% of paraffin to bamboo powder according to mass ratio. The optimum processing condition parameters were determined as the rotational speed at 50 r·min-1 and the temperature at 100oC for BPPC. The BPPC (containing 30 copies bamboo powder) possessed eminent interfacial compatibility and mechanical properties of BPPC.

Rheological properties of tailing paste slurry

The initial shear stress and plastic cohesion ( η ) are the most important parameters reflecting the rheological properties of the paste slurry. The rheological parameters as well as the quantitative relationship among the consumption of different fill materials were obtained through the experiment and research on these parameters. They can be used to predict the scope of the values of τ and η in production for a given ratio, which can reduce the conveying resistance of fill slurry along the pipelines and avoid the blockage of the pipelines. It is found that the rheological model of the total tailing slurry belongs to the Bingham type, which has a feature of strong internal structure and large initial shear stress. The calculation formula for the resistance loss of pipelines conforms nicely to the field test and the actual production in Jinchuan Nickel Mine.

Large-scale direct shear testing of geocell reinforced soil

The tests on the shear property of geocell reinforced soils were carried out by using large-scale direct shear equipment with shear-box-dimensions of 500 mm×500 mm×400 mm (length×width×height). Three types of specimens, silty gravel soil, geocell reinforced silty gravel soil and geocell reinforced cement stabilizing silty gravel soil were used to investigate the shear stress-displacement behavior, the shear strength and the strengthening mechanism of geocell reinforced soils. The comparisons of large-scale shear test with triaxial compression test for the same type of soil were conducted to evaluate the influences of testing method on the shear strength as well. The test results show that the unreinforced soil and geocell reinforced soil give similar nonlinear features on the behavior of shear stress and displacement. The geocell reinforced cement stabilizing soil has a quasi-elastic characteristic in the case of normal stress coming up to 1.0 GPa. The tests with the reinforcement of geocell result in an increase of 244% in cohesion, and the tests with the geocell and the cement stabilization result in an increase of 10 times in cohesion compared with the unreinforced soil. The friction angle does not change markedly. The geocell reinforcement develops a large amount of cohesion on the shear strength of soils.

Catenary action of restrained steel beam against progressive collapse of steel frameworks

The changing law of internal forces during the whole deformation development process was analyzed. The process was divided into five stages based on the internal force state of the beam and the assumptions of internal force relationship of five stages were proposed. Then, the formulas for determining the midspan deflection of the steel beam under distributed load, which was restrained both in rotational and axial directions, were obtained using restraint coefficient method and rigid-plastic mechanism, thereby the deformation development process was expressed accurately in a quantified way. Priority was given to the analysis of the process from bending to tension-bending, then the final state totally depends on tension to resist the external loads, that is the problem of catenary action of the restrained beam under distributed load. Additionally, finite element analysis was carried out with soitware ABAQUS6.7 on a restrained steel beam under distributed load with different axial and rotational restraint coefficients. The accuracy of the formulas presented was verified by the results of the behavior of the restrained beams. Finally, error analysis was conducted and some formulas were corrected according to the reasons of errors. The calculated results of corrected formulas match the FEM analysis results better, thus the accuracy of these formulas is improve .

Strength and deformation behaviors of cemented tailings backfill under triaxial compression

It is of great significance for safety reason to obtain the triaxial compressive properties of cemented tailings backfill(CTB).The influence of cement content,curing age and confining pressure on strength and deformation properties of CTB was examined and discussed.Results indicate that the triaxial compressive and deformation behavior of CTB is strongly affected by the cement content,curing age and confining pressure.The increase in cement content,curing age and confining pressure leads to a change in stress−strain behavior and an increase in the axial strain at failure and post-peak strength loss.The cohesion of CTB rises as the curing age and cement content increase.However,the enhancement in internal friction angle is trivial and negligible.It should be noted that the failure pattern of CTB samples in triaxial compression is mainly along a shear plane,the confining pressure restrains the lateral expansion and the bulging failure pattern is dominantly detected in CTB samples as curing age length and cement content increase.The results will help to better understand the triaxial mechanical and deformation behavior of CTB.

Stress distribution and fatigue life of built-up sleeved backup roll

The advantage of built-up sleeved backup roll was described. Based on the stress distribution analysis and simulation for the built-up sleeved backup roll by using finite element method, the effects of roll sleeve thickness and shrink range on the stress-strain field were studied. Finally, based on the methodology and strategy of the fatigue analysis, fatigue life of backup roll was estimated by using the stress-strain data obtained through finite element simulation. The results show that roll sleeve thickness and shrink range have a great influence on sleeve stress distribution of built-up sleeved roll. Under the circumstance of ensuring transferring enough torque, the shrink range should be kept small. However, thicker roll sleeve has longer roll service life when the shrink range is constant.

Neuron system shock superimposed response based on catastrophe dynamics

With the rapid development of computer science and artificial intelligence technology, the complexity and intelligence of the neural network models constructed by people have been greatly improved. When the complex neuron system is subjected to the impact of ＂catastrophic＂, its original characteristics may be changed, and the consequences are difficult to predict. Catastrophe dynamics mainly studies the source of the sudden violent change of nature and human society and its evolution. The impact of the system can be divided into endogenous and exogenous shocks. In this article, catastrophe theory is used to study the neuron system. Based on the mean field model of Hurst and Sornette, introducing the weight parameters, mathematical models are constructed to study the response characteristics of the neuron system in face of exogenous shocks, endogenous shocks, and integrated shocks. The time characteristics of the shock response of the neuron system are discussed too, such as the instantaneous and long-term response of the system in face of shocks, the different response forms according to the weight or linear superposition, and the influence of adjusting parameters on the neuron system. The research result shows that the authoritarian coefficient and weight coefficient have a very important influence on the response of neuron system; By adjusting the two coefficients, the purpose of disaster prevention, self-healing protection and response reducing can be well achieved.

China-Japan Security Relations and China＇s Countermeasures

Security relations are crucial in China-Japan relations. Since the"nationalization"of the Diaoyu Islands by Japan in 2012, mutual trust between China and Japan has been declining, and bilateral security relations have reached a low point. China-Japan security relations are typified by ongoing dispute over the Diaoyu Islands, lack of mutual trust exacerbated by various actions by Japan, and the delay of China-Japan security dialogues. The evolution of China-Japan security relations derived from the Diaoyu Islands dispute is clearly beyond the scope of the dispute itself, with deep-rooted internal and external factors. In the near future,China-Japan security relations will face more challenges than opportunities. China should take measures, including enhancing mutual trust in politics and security between the two countries, to impose necessary pressure on Japan to change course, to win over neighboring countries so as to avoid pretext for Japan's intervention in regional issues,and to strengthen interpersonal communication and understanding between people of the two countries in order to stabilize security relations.

Spatio-temporal Variation of Wind Erosion in Inner Mongolia of China Between 2001 and 2010

Using Geographic Information System(GIS), based on wind speed, precipitation, topographic, soil, vegetation coverage and land use data of Inner Mongolia between 2001 and 2010, we applied the revised wind erosion equation(RWEQ) model to simulate wind erosion intensity. The results showed that an area of approximately 47.8 × 10~4 km^2 experienced wind erosion in 2010, 23.2% of this erosion could be rated as severe, and 46.0% as moderate. Both the area and the intensity of wind erosion had decreased from 2001 to 2010, the wind erosion area reduced 10.1%, and wind erosion intensity decreased by 29.4%. Precipitation, wind speed, population size and urbanization in rural areas, and gross domestic product of primary industry(GDP1) were the main factors influencing wind erosion. Overall, these factors accounted for 88.8% of the wind erosion. These results indicated that the decrease in wind erosion over the past decade related to the increase in precipitation and the decrease in the number of windy days, while modest urban development and optimization of the economic structure might partially reduced the level of ecological pressure, highlighting the importance of human activities in controlling wind erosion.

High-Speed Geometric Quantum Computation with Trapped Thermal Ions via Vibrational Mode Decay

We utilize the general displacement operator proposed recently [C.Y. Chen, et al., Phys. Rev. A 74 （2006） 032328] to investigate a high-speed geometric quantum computation via vibrational mode decay of two trapped thermal ions. We find that, under some special conditions, the geometric phase gating is somewhat faster in the heating case than in the ideal case. We also investigate analytically the influence from the vibrational mode heating on the fidelity and the success probability of the implementation.

The Gravity Field Variation Caused by Inner Core Super Rotation

Due to the super rotation of the Earth＇s inner core, the tilted figure axis of the inner core would progress with respect to the mantle and thus cause the variation of the Earth＇s external gravity field. This paper improves the present model of the gravity field variation caused by the inner core super rotation. Under the assumption that the inner core is a stratifying ellipsoid whose density function is fitted out from PREM and the super rotation rate is 0.27-0.53°/yr, calculations show that the global temporal variations on the Earth＇s surface have a maximum value of about 0.79-1.54×10^3 pGal and a global average intensity of about 0.45-0.89×10^ 3 μGal in the whole year of 2007, which is beyond the accuracy of the present gravimetry and even the super conducting gravimeter data. However, both the gravity variations at Beijing and Wuhan vary like sine variables with maximal variations around 0.33 pGal and 0.29 pGal, respectively, in one cycle. Thus, continuous gravity measurements for one or two decades might be able to detect the differential motion of the inner core.

Theoretical and simulation research of hydrodynamic instabilities in inertial-confinement fusion implosions

Inertial fusion energy （IFE） has been considered a promising, nearly inexhaustible source of sustainable carbon-free power for the world＇s energy future. It has long been recognized that the control of hydrodynamic instabilities is of critical importance for ignition and high-gain in the inertial-confinement fusion （ICF） hot-spot ignition scheme. In this mini-review, we summarize the progress of theoretical and simulation research of hydrodynamic instabilities in the ICF central hot-spot implosion in our group over the past decade. In order to obtain sufficient understanding of the growth of hydrodynamic instabilities in ICF, we first decompose the problem into different stages according to the implosion physics processes. The decomposed essential physics pro- cesses that are associated with ICF implosions, such as Rayleigh-Taylor instability （RTI）, Richtmyer-Meshkov instability （RMI）, Kelvin-Helmholtz instability （KHI）, convergent geometry effects, as well as perturbation feed-through are reviewed. Analyti- cal models in planar, cylindrical, and spherical geometries have been established to study different physical aspects, including density-gradient, interface-coupling, geometry, and convergent effects. The influence of ablation in the presence of preheating on the RTI has been extensively studied by numerical simulations. The KHI considering the ablation effect has been discussed in detail for the first time. A series of single-mode ablative RTI experiments has been performed on the Shenguang-II laser facility. The theoretical and simulation research provides us the physical insights of linear and weakly nonlinear growths, and nonlinear evolutions of the hydrodynamic instabilities in ICF implosions, which has directly supported the research of ICF ignition target design. The ICF hot-spot ignition implosion design that uses several controlling features, based on our current understanding of hydrodynamic instabilities, to address shell implosion stability, has been briefly described, several of which are novel.

Intratree Variability of Cleavage Resistance of Chinese Fir from Plantation

This paper studied the variation of cleavage resistance of Chinese fir wood from plantation. Six trees of 36 years old were investigated, and the cleavage resistance properties for 672 samples made of the trees were tested. The samples were cut from the sapwood and heartwood at different directions (south and north) and heights (1.3, 3.3, 5.3 and 7.3 m) of the trees. The result showed that: tangential cleavage resistance was higher than radial one, and cleavage resistance of sapwood was higher than that of heartwood, but there was no significant difference in cleavage resistances between sections of the north and the south of the trees. There was a little variation in cleavage resistance between the radial and tangential from butt to top log, which shows a little decrease with the height from 1.3 to 5.3 m , but a rise in the top of the trees.

Explaining variation in productivity requires intraspecific variability in plant height among communities

While recent studies have shown the importance of intraspecific trait variation in the processes of community assembly,we still know little about the contributions of intraspecific trait variability to ecosystem functions.Here,we conducted a functional group removal experiment in an alpine meadow in Qinghai-Tibetan Plateau over 4 years to investigate the relative importance of inter-and intraspecific variability in plant height for productivity.We split total variability in plant height within each of 75 manipulated communities into interspecific variability(TV_(inter))and intraspecific variability within a community(ITV_(within)).Community-weighted mean height among communities was decomposed into fixed community-weighted mean(CWM_(fixed))and intraspecific variability among communities(ITV_(among)).We constructed a series of generalized additive mixed models and piecewise structural equation modeling to determine how trait variability(i.e.TV_(inter),ITV_(within),CWM_(fixed) and ITV_(among))indirectly mediated the changes in productivity in response to functional group removal.Community productivity was not only affected directly by treatment manipulations,but also increased with both inter-and intraspecific variability(i.e.CWM_(fixed) and ITV_(among))in plant height indirectly.This suggests that both the‘selection effect’and a‘shade-avoidance syndrome’can incur higher CWM_(fixed) and ITV_(among),and may simultaneously operate to regulate productivity.Our findings provide new evidence that,besides interspecific variability,intraspecific trait variability in plant height also plays a role in maintaining net primary productivity.