Background:This prospective study explored the effects of endurance running(ER) in minimal versus standard running shoes on the foot’s superficial layer intrinsic muscles and the function of the longitudinal arch.Our...Background:This prospective study explored the effects of endurance running(ER) in minimal versus standard running shoes on the foot’s superficial layer intrinsic muscles and the function of the longitudinal arch.Our hypothesis was that running in minimal shoes would cause hypertrophy in these muscles and lead to higher,stronger,stiffer arches.Methods:The hypothesis was tested using a sample of 33 healthy runners randomized into two groups,a control group shod in traditional running footwear and an experimental group shod in minimal support footwear,whose feet were scanned in an MRI before and after a 12-week training regime.Running kinematics as well as arch stiffness and height were also assessed before and after the treatment period.Results:Analysis of anatomical cross-sectional areas and muscle volumes indicate that the flexor digitomm brevis muscle became larger in both groups by 11%and 21%,respectively,but only the minimally shod runners had significant areal and volumetric increases of the abductor digiti minimi of 18%and 22%,respectively,and significantly increased longitudinal arch stiffness(60%).Conclusion:These results suggest that endurance running in minimal support footwear with 4 mm offset or less makes greater use of the springlike function of the longitudinal arch,thus leading to greater demands on the intrinsic muscles that support the arch,thereby strengthening the foot.展开更多
Objective: To compare the antihypertensive effects of tuina at Taichong (LR 3), Neiguan (PC 6) and Qiaogong (Extra) to screen the best tuina protocol for primary hypertension due to liver-fire flaming-up. Methods: A t...Objective: To compare the antihypertensive effects of tuina at Taichong (LR 3), Neiguan (PC 6) and Qiaogong (Extra) to screen the best tuina protocol for primary hypertension due to liver-fire flaming-up. Methods: A total of 102 patients with primary hypertension due to liver-fire flaming-up were randomly divided into a Taichong (LR 3) group, a Neiguan (PC 6) group and a Qiaogong (Extra) group according to the random number table, with 34 cases in each group. Patients in the three groups received 4-week tuina treatment with the corresponding acupoint respectively. The blood pressure was recorded by ben chtop mercury sphygmoma no meter before tuina, immediately after tuina treatment, 30 min and 60 min after tuina treatment with the patient in a supine position in a quiet treatment room. The total effective rate was observed. Results: The systolic and diastolic blood pressures of the three groups all decreased after treatment (all P<0.05). The decrease of systolic and diastolic blood pressure at different time points after treatment in the Qiaogong (Extra) group and the Taichong (LR 3) group were better than those in the Neiguan (PC 6) group (all P<0.05). Qiaogong (Extra) group had the highest total effective rate though there was no statistical differenee in the total effective rate among the three groups (P>0.05). Con elusion: Treati ng primary hypertensi on due to liver-fire flami ng-up with tuina at Taich ong (LR 3), Neigua n (PC 6) and Qiaogong (Extra) can reduce systolic and diastolic blood pressure respectively, among which Qiaogong (Extra) has the highest total effective rate.展开更多
Objectives： To explore the clinical fea- tures of traumatic atlantoaxial instability combined with subaxial cervical spinal cord injury （CSCI）, and to analyze the feasibility, indication and therapeutic effects of ...Objectives： To explore the clinical fea- tures of traumatic atlantoaxial instability combined with subaxial cervical spinal cord injury （CSCI）, and to analyze the feasibility, indication and therapeutic effects of anterior-posterior approach in such cases. Methods： From March 2004 to September 2009, 16 cases with this trauma were admitted and surgically treated in our department. Before surgery, skull traction was performed. Posterior atlantoaxial pedicle screw internal fixation and bone graft fusion were conducted to manage traumatic atlantoaxial instability. As for subaxial CSCI, anterior cervical corpectomy or discectomy decompression, bone grafting and internal fixation with steel plates were applied. Results： All operations were successful. The average operation time was 3 hours and operative blood loss 400 ml. Satisfactory reduction of both the upper and lower cervical spine and complete decompression were achieved. All patients were followed up for 12 to 36 months. Their clinical symptoms were improved by various levels. The Japanese Orthopaedic Association （JOA） scores ranged from 10（improvement rate=70.10%）. X-rays, spiral CT and MRI confirmed normal cervical alignments, complete decompression and fine implants＇ position. There was no breakage or loosening of screws, nor exodus of titanium mesh or implanted bone blocks. The grafted bone achieved fusion 3-6 months postoperatively and no atlantoaxial instability was observed. Conclusions： Traumatic atlantoaxial instability may combine with subaxial CSCI, misdiagnosis of which should be especially alerted and avoided. For severe cases, one stage anterior-posterior approach to decompress the upper and lower cervical spine, together with reposition, bone grafting and fusion, as well as internal fixation can immediately restore the normal alignments and stability of the cervical spine and effectively improve the spinal nervous function, thus being an ideal approach.展开更多
Objective: To investigate appropriate ways for screw placement of pedicle of vertebral arch in the horizontal plane. Methods: Fifteen preserved thoracolumbar spine specimens (T 11 L 5) were used and divided into three...Objective: To investigate appropriate ways for screw placement of pedicle of vertebral arch in the horizontal plane. Methods: Fifteen preserved thoracolumbar spine specimens (T 11 L 5) were used and divided into three groups at random. Firstly four anatomic parameters indicating screw positions in the horizontal plane were measured. Secondly the methods of Roy camille, Magerl, and authors’segmental differences were used to place successively the screws of the pedicles with 5 mm, 6 mm, and 7 mm in diameter. Coincidences between the drilling point, drilling direction and pedicle axis, and ruptures of the pedicle as well as the length of the screw in the vertebral body were observed. Results: Four anatomic parameters at various segments showed significant differences (P < 0.05 ). The drilling point by the Roy camille’s method deviated medial to pedicle axis in most segments, and its drilling direction did not coincide well with most E angles of the pedicles. The drilling point by Magerl’s method coincided relatively well with pedicle axis in lumbar vertebrae, but there were still some differences between its drilling direction and E angles of the pedicles. The method of segmental differences coincided the best with the pedicle axis. The lengths of screw in the vertebra were relatively long by both Magerl and segmental difference methods. When 5 mm diametral screw was used by the three methods, the rupture rate was very low. When 6 mm and 7 mm diametral screws were placed, the rupture rate was accordingly increased. Of the three methods, Roy camilles method showed a relatively high rupture rate, while the method of segmental differences a comparatively low rupture rate. Various degrees of rupture of the pedicle of vertebral arch were found at the juncture of the thoracic and lumbar vertebrae when 6 mm or 7 mm diametral screws was used by any screw placement method. In contrast, the rupture was seldom seen at the lower lumbar vertebrae when 7 mm diametral screws were used.Conclusions: The segmental difference method is proved to have the anatomic safety and screw biomechanical stability. It is appropriate to choose different diametral screws, different drilling points and directions according to different segments of the vertebra.展开更多
基金supported by the Charles Phelps Taft Research Center at the University of Cincinnati
文摘Background:This prospective study explored the effects of endurance running(ER) in minimal versus standard running shoes on the foot’s superficial layer intrinsic muscles and the function of the longitudinal arch.Our hypothesis was that running in minimal shoes would cause hypertrophy in these muscles and lead to higher,stronger,stiffer arches.Methods:The hypothesis was tested using a sample of 33 healthy runners randomized into two groups,a control group shod in traditional running footwear and an experimental group shod in minimal support footwear,whose feet were scanned in an MRI before and after a 12-week training regime.Running kinematics as well as arch stiffness and height were also assessed before and after the treatment period.Results:Analysis of anatomical cross-sectional areas and muscle volumes indicate that the flexor digitomm brevis muscle became larger in both groups by 11%and 21%,respectively,but only the minimally shod runners had significant areal and volumetric increases of the abductor digiti minimi of 18%and 22%,respectively,and significantly increased longitudinal arch stiffness(60%).Conclusion:These results suggest that endurance running in minimal support footwear with 4 mm offset or less makes greater use of the springlike function of the longitudinal arch,thus leading to greater demands on the intrinsic muscles that support the arch,thereby strengthening the foot.
文摘Objective: To compare the antihypertensive effects of tuina at Taichong (LR 3), Neiguan (PC 6) and Qiaogong (Extra) to screen the best tuina protocol for primary hypertension due to liver-fire flaming-up. Methods: A total of 102 patients with primary hypertension due to liver-fire flaming-up were randomly divided into a Taichong (LR 3) group, a Neiguan (PC 6) group and a Qiaogong (Extra) group according to the random number table, with 34 cases in each group. Patients in the three groups received 4-week tuina treatment with the corresponding acupoint respectively. The blood pressure was recorded by ben chtop mercury sphygmoma no meter before tuina, immediately after tuina treatment, 30 min and 60 min after tuina treatment with the patient in a supine position in a quiet treatment room. The total effective rate was observed. Results: The systolic and diastolic blood pressures of the three groups all decreased after treatment (all P<0.05). The decrease of systolic and diastolic blood pressure at different time points after treatment in the Qiaogong (Extra) group and the Taichong (LR 3) group were better than those in the Neiguan (PC 6) group (all P<0.05). Qiaogong (Extra) group had the highest total effective rate though there was no statistical differenee in the total effective rate among the three groups (P>0.05). Con elusion: Treati ng primary hypertensi on due to liver-fire flami ng-up with tuina at Taich ong (LR 3), Neigua n (PC 6) and Qiaogong (Extra) can reduce systolic and diastolic blood pressure respectively, among which Qiaogong (Extra) has the highest total effective rate.
文摘Objectives： To explore the clinical fea- tures of traumatic atlantoaxial instability combined with subaxial cervical spinal cord injury （CSCI）, and to analyze the feasibility, indication and therapeutic effects of anterior-posterior approach in such cases. Methods： From March 2004 to September 2009, 16 cases with this trauma were admitted and surgically treated in our department. Before surgery, skull traction was performed. Posterior atlantoaxial pedicle screw internal fixation and bone graft fusion were conducted to manage traumatic atlantoaxial instability. As for subaxial CSCI, anterior cervical corpectomy or discectomy decompression, bone grafting and internal fixation with steel plates were applied. Results： All operations were successful. The average operation time was 3 hours and operative blood loss 400 ml. Satisfactory reduction of both the upper and lower cervical spine and complete decompression were achieved. All patients were followed up for 12 to 36 months. Their clinical symptoms were improved by various levels. The Japanese Orthopaedic Association （JOA） scores ranged from 10（improvement rate=70.10%）. X-rays, spiral CT and MRI confirmed normal cervical alignments, complete decompression and fine implants＇ position. There was no breakage or loosening of screws, nor exodus of titanium mesh or implanted bone blocks. The grafted bone achieved fusion 3-6 months postoperatively and no atlantoaxial instability was observed. Conclusions： Traumatic atlantoaxial instability may combine with subaxial CSCI, misdiagnosis of which should be especially alerted and avoided. For severe cases, one stage anterior-posterior approach to decompress the upper and lower cervical spine, together with reposition, bone grafting and fusion, as well as internal fixation can immediately restore the normal alignments and stability of the cervical spine and effectively improve the spinal nervous function, thus being an ideal approach.
文摘Objective: To investigate appropriate ways for screw placement of pedicle of vertebral arch in the horizontal plane. Methods: Fifteen preserved thoracolumbar spine specimens (T 11 L 5) were used and divided into three groups at random. Firstly four anatomic parameters indicating screw positions in the horizontal plane were measured. Secondly the methods of Roy camille, Magerl, and authors’segmental differences were used to place successively the screws of the pedicles with 5 mm, 6 mm, and 7 mm in diameter. Coincidences between the drilling point, drilling direction and pedicle axis, and ruptures of the pedicle as well as the length of the screw in the vertebral body were observed. Results: Four anatomic parameters at various segments showed significant differences (P < 0.05 ). The drilling point by the Roy camille’s method deviated medial to pedicle axis in most segments, and its drilling direction did not coincide well with most E angles of the pedicles. The drilling point by Magerl’s method coincided relatively well with pedicle axis in lumbar vertebrae, but there were still some differences between its drilling direction and E angles of the pedicles. The method of segmental differences coincided the best with the pedicle axis. The lengths of screw in the vertebra were relatively long by both Magerl and segmental difference methods. When 5 mm diametral screw was used by the three methods, the rupture rate was very low. When 6 mm and 7 mm diametral screws were placed, the rupture rate was accordingly increased. Of the three methods, Roy camilles method showed a relatively high rupture rate, while the method of segmental differences a comparatively low rupture rate. Various degrees of rupture of the pedicle of vertebral arch were found at the juncture of the thoracic and lumbar vertebrae when 6 mm or 7 mm diametral screws was used by any screw placement method. In contrast, the rupture was seldom seen at the lower lumbar vertebrae when 7 mm diametral screws were used.Conclusions: The segmental difference method is proved to have the anatomic safety and screw biomechanical stability. It is appropriate to choose different diametral screws, different drilling points and directions according to different segments of the vertebra.
