In order to perfectly reflect the dynamic corrosion of reinforced concrete (RC) cover in practical engineering,an analytic model of non-uniform corrosion induced cracking was presented based on the elastic-plastic fra...In order to perfectly reflect the dynamic corrosion of reinforced concrete (RC) cover in practical engineering,an analytic model of non-uniform corrosion induced cracking was presented based on the elastic-plastic fracture mechanics theory.Comparisons with the published experimental data show that the predictions given by the present model are in good agreement with the results both for natural exposed experiments and short-time indoor tests (the best difference is about 2.7%).Also it obviously provides much better precision than those models under the assumption of uniform corrosion (the maximal improved precision is about 48%).Therefore,it is pointed out that the so-called uniform corrosion models to describe the cover cracking of RC should be adopted cautiously.Finally,the influences of thickness of local rusty layer around the reinforcing steel bar on the critical corrosion-induced crack indexes were investigated.It is found that the thickness of local rusty layer has great effect on the critical mass loss of reinforcing steel,threshold expansion pressure,and time to cover cracking.For local rusty layer thickness with a size of a=0.5 mm,the time to cover cracking will increase by about one times when a/b (a,semi-minor axis;b,semi-major axis) changes from 0.1 to 1 mm.展开更多
Shanghai Changjiang Tunnel, 15 m in diameter, is one of the world＇s largest shield-driven tunnels in diameter. Tongji University has recently carried out a test on the full-scale three-ring lining structure of Changj...Shanghai Changjiang Tunnel, 15 m in diameter, is one of the world＇s largest shield-driven tunnels in diameter. Tongji University has recently carried out a test on the full-scale three-ring lining structure of Changjiang Tunnel. This paper introduces the testing processes, including loading apparatuses, test contents, test cases, etc., and makes comparison with other shield lining structure tests conducted before, and finally gives some evaluations on the design of the tunnel.展开更多
This paper presents an analog circuit built-in-test （BIT） structure based on boundary scan and realizes the BI＇I. It predigests the test process and improves the test precision by taking the rectangular pulse as st...This paper presents an analog circuit built-in-test （BIT） structure based on boundary scan and realizes the BI＇I. It predigests the test process and improves the test precision by taking the rectangular pulse as stimulator and analog switch as auxiliary bridge. The experiment of uA741 shows that the design is feasible. Compared with the traditional test method, it is better regarding reliability and measurability of the analog circuit system.展开更多
As one of the world well-known high-stakes tests, CET-4 （College English Test Band 4） changed from being generally accepted to being widely questioned in the past 25 years. In spite of a series of reforms of CET-4, ...As one of the world well-known high-stakes tests, CET-4 （College English Test Band 4） changed from being generally accepted to being widely questioned in the past 25 years. In spite of a series of reforms of CET-4, the negative impact of CET-4 remains intense. Three main reasons are probed into here. Firstly, the objective of CET-4 is ambiguous. Secondly, the test objective does not accord with teaching objective. Finally, test contents do not match well with the practical language use. To improve the present passive state of CET-4, some suggestions are given.展开更多
Power consumption in test mode is much higher than that in normal mode,which is prone to causing circuit damage and reducing the yield of chips.To reduce the power dissipation efficiently,a modified linear feedback sh...Power consumption in test mode is much higher than that in normal mode,which is prone to causing circuit damage and reducing the yield of chips.To reduce the power dissipation efficiently,a modified linear feedback shift register(LFSR)is designed to decrease switching activity dramatically during the generation of address sequences for memory built-in self-test(MBIST).The address models are generated by a blend of two address generators with an optimized address partition and two distinct controlled clock signals.An address generator circuit for MBIST of 64 k×32 static random access memory(SRAM)is designed to illustrate the proposed scheme.Experimental results show that when the address bus size is 16 bits,compared with the traditional LFSR,the proposed LFSR can reduce the switching activity and dynamic power by 71.1%and 68.2%,respectively,with low area overhead.展开更多
基金Project(50925829) supported by the National Science Fund for Distinguished Young Scholars of ChinaProject(50908148) supported by the National Natural Science Foundation of ChinaProjects(2009-K4-23,2010-11-33) supported by the Research of Ministry of Housing and Urban Rural Development of China
文摘In order to perfectly reflect the dynamic corrosion of reinforced concrete (RC) cover in practical engineering,an analytic model of non-uniform corrosion induced cracking was presented based on the elastic-plastic fracture mechanics theory.Comparisons with the published experimental data show that the predictions given by the present model are in good agreement with the results both for natural exposed experiments and short-time indoor tests (the best difference is about 2.7%).Also it obviously provides much better precision than those models under the assumption of uniform corrosion (the maximal improved precision is about 48%).Therefore,it is pointed out that the so-called uniform corrosion models to describe the cover cracking of RC should be adopted cautiously.Finally,the influences of thickness of local rusty layer around the reinforcing steel bar on the critical corrosion-induced crack indexes were investigated.It is found that the thickness of local rusty layer has great effect on the critical mass loss of reinforcing steel,threshold expansion pressure,and time to cover cracking.For local rusty layer thickness with a size of a=0.5 mm,the time to cover cracking will increase by about one times when a/b (a,semi-minor axis;b,semi-major axis) changes from 0.1 to 1 mm.
文摘Shanghai Changjiang Tunnel, 15 m in diameter, is one of the world＇s largest shield-driven tunnels in diameter. Tongji University has recently carried out a test on the full-scale three-ring lining structure of Changjiang Tunnel. This paper introduces the testing processes, including loading apparatuses, test contents, test cases, etc., and makes comparison with other shield lining structure tests conducted before, and finally gives some evaluations on the design of the tunnel.
文摘This paper presents an analog circuit built-in-test （BIT） structure based on boundary scan and realizes the BI＇I. It predigests the test process and improves the test precision by taking the rectangular pulse as stimulator and analog switch as auxiliary bridge. The experiment of uA741 shows that the design is feasible. Compared with the traditional test method, it is better regarding reliability and measurability of the analog circuit system.
文摘As one of the world well-known high-stakes tests, CET-4 （College English Test Band 4） changed from being generally accepted to being widely questioned in the past 25 years. In spite of a series of reforms of CET-4, the negative impact of CET-4 remains intense. Three main reasons are probed into here. Firstly, the objective of CET-4 is ambiguous. Secondly, the test objective does not accord with teaching objective. Finally, test contents do not match well with the practical language use. To improve the present passive state of CET-4, some suggestions are given.
基金Foundation items:Fundamental Research Funds for the Central Universities(No.JUSRP51510)Primary Research&Development Plan of Jiangsu Province(No.BE2019003-2)。
文摘Power consumption in test mode is much higher than that in normal mode,which is prone to causing circuit damage and reducing the yield of chips.To reduce the power dissipation efficiently,a modified linear feedback shift register(LFSR)is designed to decrease switching activity dramatically during the generation of address sequences for memory built-in self-test(MBIST).The address models are generated by a blend of two address generators with an optimized address partition and two distinct controlled clock signals.An address generator circuit for MBIST of 64 k×32 static random access memory(SRAM)is designed to illustrate the proposed scheme.Experimental results show that when the address bus size is 16 bits,compared with the traditional LFSR,the proposed LFSR can reduce the switching activity and dynamic power by 71.1%and 68.2%,respectively,with low area overhead.
