This paper describes the development of an expert system(ES) on earth retaining structures for the selection and design.The ES retaining is an interactive menudriven system and consists of two main parts—the selectio...This paper describes the development of an expert system(ES) on earth retaining structures for the selection and design.The ES retaining is an interactive menudriven system and consists of two main parts—the selection part,selectwall and the design part.Selectwall is developed using the knowledge base and it makes a choice of the most appropriate retaining structure.The design part is developed by three independent subprograms which perform detailed design including strength,deformation,stability of the retaining structure.The calculation results are illustrated by plotting the diagram.Using this program,the design procedure of the retaining structure can be performed automatically.展开更多
To improve the separation performance of a supersonic gas separation device for the treatment of gas mixture with a single heavy component, a novel structure with shorter settlement distance was constructed and a meth...To improve the separation performance of a supersonic gas separation device for the treatment of gas mixture with a single heavy component, a novel structure with shorter settlement distance was constructed and a method of droplet enlargement was applied. A series of experiments were carried out in the improved separation device under various conditions, using air-ethanol vapor as the medium and micro water droplets as nucleation cen- ters. The effects of the inlet pressure, temperature and relative humidity, the swirling intensity, and mass flow rate of water on the separation performance were investigated. The separation was improved by increasing the inlet pressure and relative humidity. With the decrease of swirling intensity and mass flow rate of water, the separation efficiency increased first and then decreased. The inlet temperature had a slight effect on the separation. The results showed that the separation performance was effectively improved using the proposed structure and method, and the best separation in this study was obtained with the ethanol removal rate about 55% and dew point depression 27 K. The addition of water had little pollution to the air-ethanol vapor system since the water carry-over rate was within the range of -2 %-0 in most cases.展开更多
Multirate multivariable predictive control system with the sampling mechanism that adjusts the plant inputs only once but detects the plant outputs several times during a period is examined. The IMC structure of the s...Multirate multivariable predictive control system with the sampling mechanism that adjusts the plant inputs only once but detects the plant outputs several times during a period is examined. The IMC structure of the system is derived, and its robust stability and zero steady state error characteristics are analyzed. A new control algorithm is developed by adding the variation of the outputs to the index performance. The simulation results show that the method is effective and has zeros steady-state error.展开更多
This paper proposes the concept of projection curves based on the theory of CT image reconstruction to probe the internal structure of the working panel prior to formal mining of the working panel.As well as reducing ...This paper proposes the concept of projection curves based on the theory of CT image reconstruction to probe the internal structure of the working panel prior to formal mining of the working panel.As well as reducing costs,this method provides safe and efficient excavation of the working panel.According to the results of the numerical model and the actual working panel,the new method has been proven to be accurate in detecting the location of the fault that extends into the face.Concealed faults of the internal working panel,as well as the start and end points of the fault,can be detected by this method.Engineering practice has proven that the method is highly reliable,has a highly decisive impact on faults for coal mining,and can be used to guide the safe mining of the working panel.展开更多
In this paper,we firstly analyze the "3,400 travel time table "used for a long time in Xinjiang Seismological Network to obtain the velocity structure models in accord with the table by fitting. Then we fit ...In this paper,we firstly analyze the "3,400 travel time table "used for a long time in Xinjiang Seismological Network to obtain the velocity structure models in accord with the table by fitting. Then we fit the velocity of all seismic phases recorded in Xinjiang region in January 2009 ~ December 2013. Simulation analysis is done on the reliability and stability of the velocities,and a concept is proposed for building subarea crustal velocity models according to partitioning of seismic cluster regions. The crustal velocity model suitable for the Yutian area is fitted with the data of all phases of seismic events within a radius of 1°around the 2014 Yutian M_S7.3 earthquake since January 2009,and the model is applied to the relocation of the Yutian M_S7.3 earthquake and determination of focal depths of the earthquake sequence.展开更多
The base stress of the opened bottom cylinder structure differs greatly from that of the structure with a closed bottom. By investigating the inner soil pressure on the cylinder wall and the base stress of the cylinde...The base stress of the opened bottom cylinder structure differs greatly from that of the structure with a closed bottom. By investigating the inner soil pressure on the cylinder wall and the base stress of the cylinder base, which were obtained from the model experiments, the interactions among the filler inside the cylinder, subsoil and cylinder are analyzed. The adjusting mechanism of frictional resistance between the inner filler and the wall of the cylinder during the overturning of the cylinder is discussed. Based on the experimental study, a method for calculating the base stress of the opened bottom cylinder structure is proposed. Meanwhile, the formulas for calculating the effective anti-overturning ratio of the opened bottom cylinder are derived.展开更多
This paper is on control system design for visual based indoor inspection by the model helicopters. For the indoor inspection system for large structures, there are some cases where it is difficult for htunans to work...This paper is on control system design for visual based indoor inspection by the model helicopters. For the indoor inspection system for large structures, there are some cases where it is difficult for htunans to work with. This paper introduces indoor inspection helicopter system with only inspection camera and prism for position sensing as payload. The control system is designed to help the operator of the inspection system to control the helicopter to designated position without much practice. The cases of the control by experienced and novice operators are compared and results show that the system has feasibility for indoor inspection system to be used by any kind of users.展开更多
We model the interior of Europa using a method by which we set three layers of Europa and the composition of each layer in advance. Comparing the calculated mass and radius related to each model with the data derived ...We model the interior of Europa using a method by which we set three layers of Europa and the composition of each layer in advance. Comparing the calculated mass and radius related to each model with the data derived by the observations, we propose three possible internal structure models for Europa. All models are assumed to be differentiated into a metallic core, a (Mg,Fe)2SiO4 silicate mantle and an outer water shell. The only difference amongst these models are the composition of the core. The core of Model I is composed of Fe, while Model II composed of FeS, and the two models are based on the inferences provided by Europa's external gravitational field. Model III has a core which consists of Fe-FeS alloy, similar to that of Earth's outer core. Model I has a Fe core with a radius of 431 km, a (Mg,Fe)2SiO4 mantle with 999 km and a water shell with 132 km. Model II has a 777 km FeS core, a 619 km (Mg,Fe)2SiO4 mantle and a 167 km water shell. Model III has a 571 km Fe0.8(FeS)0.2 core, a 832 km (Mg,Fe)2SiO4 mantle and a 166 km water shell. In all three models, the density range and the radius of each layer is consistent with those deduced by Anderson et al.展开更多
Based on the characteristics of the internal structure of closed-cell aluminum foam, this paper attempts to illus- trate the process of reconstructing the internal structures of closed-cell aluminum foam in Monte-Carl...Based on the characteristics of the internal structure of closed-cell aluminum foam, this paper attempts to illus- trate the process of reconstructing the internal structures of closed-cell aluminum foam in Monte-Carlo method and the fractal characteristics of the reconstructed model. Furthermore, Binary Array Method is proposed by analyzing the reconstructed model and the thermal conductivity model of closed-cell aluminum foam is established. At the same time, the thermal conductivity of the foam materials with different porosity is calculated by Binary Array Method, and the calculated value coincides with the experimental results in the reference, which proves the correctness of these methods.展开更多
文摘This paper describes the development of an expert system(ES) on earth retaining structures for the selection and design.The ES retaining is an interactive menudriven system and consists of two main parts—the selection part,selectwall and the design part.Selectwall is developed using the knowledge base and it makes a choice of the most appropriate retaining structure.The design part is developed by three independent subprograms which perform detailed design including strength,deformation,stability of the retaining structure.The calculation results are illustrated by plotting the diagram.Using this program,the design procedure of the retaining structure can be performed automatically.
基金Supported by the Natural Science Foundation of Liaoning Province, China （20052193） and Ph.D. Programs Foundation of Ministry of Education o f China （20070141045）.
文摘To improve the separation performance of a supersonic gas separation device for the treatment of gas mixture with a single heavy component, a novel structure with shorter settlement distance was constructed and a method of droplet enlargement was applied. A series of experiments were carried out in the improved separation device under various conditions, using air-ethanol vapor as the medium and micro water droplets as nucleation cen- ters. The effects of the inlet pressure, temperature and relative humidity, the swirling intensity, and mass flow rate of water on the separation performance were investigated. The separation was improved by increasing the inlet pressure and relative humidity. With the decrease of swirling intensity and mass flow rate of water, the separation efficiency increased first and then decreased. The inlet temperature had a slight effect on the separation. The results showed that the separation performance was effectively improved using the proposed structure and method, and the best separation in this study was obtained with the ethanol removal rate about 55% and dew point depression 27 K. The addition of water had little pollution to the air-ethanol vapor system since the water carry-over rate was within the range of -2 %-0 in most cases.
文摘Multirate multivariable predictive control system with the sampling mechanism that adjusts the plant inputs only once but detects the plant outputs several times during a period is examined. The IMC structure of the system is derived, and its robust stability and zero steady state error characteristics are analyzed. A new control algorithm is developed by adding the variation of the outputs to the index performance. The simulation results show that the method is effective and has zeros steady-state error.
基金supported by the National Natural Science Foundation of China general Projects(No.51174193)the Youth Fund Project of the National Natural Science Foundation of China(No.51004102)the National High Technology Research and Development Program of China(No.2012AA062101)
文摘This paper proposes the concept of projection curves based on the theory of CT image reconstruction to probe the internal structure of the working panel prior to formal mining of the working panel.As well as reducing costs,this method provides safe and efficient excavation of the working panel.According to the results of the numerical model and the actual working panel,the new method has been proven to be accurate in detecting the location of the fault that extends into the face.Concealed faults of the internal working panel,as well as the start and end points of the fault,can be detected by this method.Engineering practice has proven that the method is highly reliable,has a highly decisive impact on faults for coal mining,and can be used to guide the safe mining of the working panel.
基金sponsored by the Special Fund of Department of Earthquake Monitoring and Prediction,CEA(1309010)Earthquake Science Foundation of Earthquake Administration of Xinjiang Uygur Autonomous Region(201207)+1 种基金the Special Training Project for Key Young Personnel of Seismic Monitoring Network of China(20130201)the Spark Program of Earthquake Science and Technology of China in 2014(XH13007)
文摘In this paper,we firstly analyze the "3,400 travel time table "used for a long time in Xinjiang Seismological Network to obtain the velocity structure models in accord with the table by fitting. Then we fit the velocity of all seismic phases recorded in Xinjiang region in January 2009 ~ December 2013. Simulation analysis is done on the reliability and stability of the velocities,and a concept is proposed for building subarea crustal velocity models according to partitioning of seismic cluster regions. The crustal velocity model suitable for the Yutian area is fitted with the data of all phases of seismic events within a radius of 1°around the 2014 Yutian M_S7.3 earthquake since January 2009,and the model is applied to the relocation of the Yutian M_S7.3 earthquake and determination of focal depths of the earthquake sequence.
文摘The base stress of the opened bottom cylinder structure differs greatly from that of the structure with a closed bottom. By investigating the inner soil pressure on the cylinder wall and the base stress of the cylinder base, which were obtained from the model experiments, the interactions among the filler inside the cylinder, subsoil and cylinder are analyzed. The adjusting mechanism of frictional resistance between the inner filler and the wall of the cylinder during the overturning of the cylinder is discussed. Based on the experimental study, a method for calculating the base stress of the opened bottom cylinder structure is proposed. Meanwhile, the formulas for calculating the effective anti-overturning ratio of the opened bottom cylinder are derived.
文摘This paper is on control system design for visual based indoor inspection by the model helicopters. For the indoor inspection system for large structures, there are some cases where it is difficult for htunans to work with. This paper introduces indoor inspection helicopter system with only inspection camera and prism for position sensing as payload. The control system is designed to help the operator of the inspection system to control the helicopter to designated position without much practice. The cases of the control by experienced and novice operators are compared and results show that the system has feasibility for indoor inspection system to be used by any kind of users.
基金supported by the National Natural Science Foundation of China(Grant Nos. 10973044 and 10833001)the Natural Science Foundation of Jiangsu Provincethe Foundation of Minor Planets of Purple Mountain Observatory
文摘We model the interior of Europa using a method by which we set three layers of Europa and the composition of each layer in advance. Comparing the calculated mass and radius related to each model with the data derived by the observations, we propose three possible internal structure models for Europa. All models are assumed to be differentiated into a metallic core, a (Mg,Fe)2SiO4 silicate mantle and an outer water shell. The only difference amongst these models are the composition of the core. The core of Model I is composed of Fe, while Model II composed of FeS, and the two models are based on the inferences provided by Europa's external gravitational field. Model III has a core which consists of Fe-FeS alloy, similar to that of Earth's outer core. Model I has a Fe core with a radius of 431 km, a (Mg,Fe)2SiO4 mantle with 999 km and a water shell with 132 km. Model II has a 777 km FeS core, a 619 km (Mg,Fe)2SiO4 mantle and a 167 km water shell. Model III has a 571 km Fe0.8(FeS)0.2 core, a 832 km (Mg,Fe)2SiO4 mantle and a 166 km water shell. In all three models, the density range and the radius of each layer is consistent with those deduced by Anderson et al.
文摘Based on the characteristics of the internal structure of closed-cell aluminum foam, this paper attempts to illus- trate the process of reconstructing the internal structures of closed-cell aluminum foam in Monte-Carlo method and the fractal characteristics of the reconstructed model. Furthermore, Binary Array Method is proposed by analyzing the reconstructed model and the thermal conductivity model of closed-cell aluminum foam is established. At the same time, the thermal conductivity of the foam materials with different porosity is calculated by Binary Array Method, and the calculated value coincides with the experimental results in the reference, which proves the correctness of these methods.
