Bulk anisotropic Nd-Fe-B magnets were prepared from hydrogen-disproportionation-desorption-recombination（HDDR） powders via spark plasma sintering（SPS） and subsequent hot deformation. The influence of sintering tem...Bulk anisotropic Nd-Fe-B magnets were prepared from hydrogen-disproportionation-desorption-recombination（HDDR） powders via spark plasma sintering（SPS） and subsequent hot deformation. The influence of sintering temperature on the structure and magnetic properties of the spark plasma sintered Nd-Fe-B magnets were studied. The remanence Br, intrinsic coercivity Hcj, and the maximum energy product（BH）max, of sintered Nd-Fe-B magnets first increase and then decrease with the increase of sintering temperature, TSPS, from 650 °C to 900 °C. The optimal magnetic properties can be obtained when TSPS is 800 °C. The Nd-Fe-B magnet sinter treated at 800 °C was subjected to further hot deformation. Compared with the starting HDDR powders or the SPS treated magnets, the hot-deformed magnets present more obvious anisotropy and possess much better magnetic properties due to the good c-axis texture formed in the deformation process. The anisotropic magnet deformed at 800 °C with 50% compression ratio has a microstructure consisting of well aligned and platelet-shaped Nd2Fe14 B grains without abnormal grain growth and exhibits excellent magnetic properties parallel to the pressing axis.展开更多
In order to elucidate the microstructure evolution and silicide precipitation behavior during high-temperature deformation,TiB reinforced titanium matrix composites were subjected to isothermal hot compression at 950...In order to elucidate the microstructure evolution and silicide precipitation behavior during high-temperature deformation,TiB reinforced titanium matrix composites were subjected to isothermal hot compression at 950℃,strain rate of 0.05 s^(−1) and employing different strains of 0.04,0.40,0.70 and 1.00.The results show that with the increase of strain,a decrease in the content,dynamic recrystallization of theαphase and the vertical distribution of TiB along the compression axis lead to stress stability.Meantime,continuous dynamic recrystallization reduces the orientation difference of the primaryαphase,which weakens the texture strength of the matrix.The recrystallization mechanisms are strain-induced grain boundary migration and particle stimulated nucleation by TiB.The silicide of Ti_(6)Si_(3) is mainly distributed at the interface of TiB andαphase.The precipitation of silicide is affected by element diffusion,and TiB whisker accelerates the precipitation behavior of silicide by hindering the movement of dislocations and providing nucleation particles.展开更多
The effectiveness of enhancing treatment of water with low turbidity through combined effects of permanganate oxidation, PAM aiding coagulation and sludge recycling was investigated through continuous bench scale stud...The effectiveness of enhancing treatment of water with low turbidity through combined effects of permanganate oxidation, PAM aiding coagulation and sludge recycling was investigated through continuous bench scale studies. In comparing with ferric chloride coagulation, only recycling sedimentation sludge was ineffective in enhancing treatment of water with low turbidity. PAM with recycled sludge showed positive effects, and the additional permanganate dosing exhibited the best potential of favoring coagulation, which leaded to much lower effluent turbidity and CODMa. Additionally, it was observed that the optimal permanganate dosage was 0. 4 mg/ L and the higher permanganate dosage exhibited inhibiting effects for pollutants removal. SEM analysis indicated that the floes were loosely formed and the particle diameter was critically low for ferric chloride coagulation process. Comparatively, the addition of PAM and permanganate with recycled sludge facilitated the aggregation of tinny particles onto compact PAM polymer chains, therefore contributing to the formation of compact floes with high particle diameter. The combined employment of recycled sludge, PAM and permanganate showed the best potential of favoring coagulation, mainly through synergistic effects between seeding, polymer bridging and increasing effective collision in mechanism. Additionally, the variation of Fe and Mn concentration after recycling and sedimentating units was studied for the processes, and the main species was also investigated for elements Fe and Mn. Sludge recycling and permanganate addition did not increase Fe and Mn concentration in the sedimented water.展开更多
基金Project(NCET-10-0364)supported by the Program for New Century Excellent Talents in University,ChinaProject(2012ZG0006)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(51174095)supported the National Natural Science Foundation of China
文摘Bulk anisotropic Nd-Fe-B magnets were prepared from hydrogen-disproportionation-desorption-recombination（HDDR） powders via spark plasma sintering（SPS） and subsequent hot deformation. The influence of sintering temperature on the structure and magnetic properties of the spark plasma sintered Nd-Fe-B magnets were studied. The remanence Br, intrinsic coercivity Hcj, and the maximum energy product（BH）max, of sintered Nd-Fe-B magnets first increase and then decrease with the increase of sintering temperature, TSPS, from 650 °C to 900 °C. The optimal magnetic properties can be obtained when TSPS is 800 °C. The Nd-Fe-B magnet sinter treated at 800 °C was subjected to further hot deformation. Compared with the starting HDDR powders or the SPS treated magnets, the hot-deformed magnets present more obvious anisotropy and possess much better magnetic properties due to the good c-axis texture formed in the deformation process. The anisotropic magnet deformed at 800 °C with 50% compression ratio has a microstructure consisting of well aligned and platelet-shaped Nd2Fe14 B grains without abnormal grain growth and exhibits excellent magnetic properties parallel to the pressing axis.
基金financial supports from the National Natural Science Foundation of China (No. 51871184)the Natural Science Foundation of Shandong Province, China (No. ZR2019MEM037)+1 种基金the Zhoucun School-City Integration Development Plan, China (No. 2020ZCXCZH03)the School-city Integration Development Project of Zibo, China (No. 2019ZBXC022)。
文摘In order to elucidate the microstructure evolution and silicide precipitation behavior during high-temperature deformation,TiB reinforced titanium matrix composites were subjected to isothermal hot compression at 950℃,strain rate of 0.05 s^(−1) and employing different strains of 0.04,0.40,0.70 and 1.00.The results show that with the increase of strain,a decrease in the content,dynamic recrystallization of theαphase and the vertical distribution of TiB along the compression axis lead to stress stability.Meantime,continuous dynamic recrystallization reduces the orientation difference of the primaryαphase,which weakens the texture strength of the matrix.The recrystallization mechanisms are strain-induced grain boundary migration and particle stimulated nucleation by TiB.The silicide of Ti_(6)Si_(3) is mainly distributed at the interface of TiB andαphase.The precipitation of silicide is affected by element diffusion,and TiB whisker accelerates the precipitation behavior of silicide by hindering the movement of dislocations and providing nucleation particles.
基金Sponsored by the National High Technology Research and Development Program of China(Grant No.2004AA601020)
文摘The effectiveness of enhancing treatment of water with low turbidity through combined effects of permanganate oxidation, PAM aiding coagulation and sludge recycling was investigated through continuous bench scale studies. In comparing with ferric chloride coagulation, only recycling sedimentation sludge was ineffective in enhancing treatment of water with low turbidity. PAM with recycled sludge showed positive effects, and the additional permanganate dosing exhibited the best potential of favoring coagulation, which leaded to much lower effluent turbidity and CODMa. Additionally, it was observed that the optimal permanganate dosage was 0. 4 mg/ L and the higher permanganate dosage exhibited inhibiting effects for pollutants removal. SEM analysis indicated that the floes were loosely formed and the particle diameter was critically low for ferric chloride coagulation process. Comparatively, the addition of PAM and permanganate with recycled sludge facilitated the aggregation of tinny particles onto compact PAM polymer chains, therefore contributing to the formation of compact floes with high particle diameter. The combined employment of recycled sludge, PAM and permanganate showed the best potential of favoring coagulation, mainly through synergistic effects between seeding, polymer bridging and increasing effective collision in mechanism. Additionally, the variation of Fe and Mn concentration after recycling and sedimentating units was studied for the processes, and the main species was also investigated for elements Fe and Mn. Sludge recycling and permanganate addition did not increase Fe and Mn concentration in the sedimented water.
