脉冲传感器的发展及其应用

传感器是人类获取各种信息的有利工具,它相当于人的"五官"且是"五官"的延伸。而今,传感器正在向小型化,集成化和智能化方向发展。在我国现代化建设中,传感器使用日益广泛,在国民经济各个领域中发挥着越来越重要的作用。文章介绍脉冲传感器系统,阐述其主要参数标定方法,研究脉冲传感器的使用以及发展。

Contribution of Adventitious Roots to Water Use Strategy of Juniperus sabina in a Semiarid Area of China

duniperus sabina Linnaeus, an evergreen shrub with prostrate life form, can effectively prevent sand moving and is an important tree species for reforestation in semiarid areas of China. It has laterally distributed adventitious roots and a deeply distributed main root system. To detect water movement between the main root system and adventitious roots, we adopted heat pulse sensors using the Heat Ratio Method, a high precision method for measuring low sap flow rates. Two sensors were implanted in each individual in the stem between the main root system and adventitious roots, and another two in lateral stems distal to all the roots. Positive sap flows during nighttime, even under saturated air moisture conditions, were detected only between the main root system and adventitious roots under drought conditions, and the rate of flow increased as drought progressed and decreased or disappeared after rain events. The results demonstrated the existence of water movement from the main root system to adventitious roots, and combined with the high contribution of nighttime sap flow to transpiration （11%-16%） the results indicate that it also involves the process of hydraulic lift, a water movement from moist subsoil to dry surface soils. Integrated water use strategy between the main root system and adventitious roots via the process of hydraulic lift of soil water maximizes water acquisition efficiency from both subsoil water and water from rain pulses on the soil surface; this increases survivability in the water-limited environment of semiarid areas.

PULSE CUMULATING METHOD FOR MULTI-TARGETS' JOINT AZIMUTH-ELEVATION FREQUENCY-DELAY ESTIMATION

The Directions of Arrivals （DOAs）, speeds and distances of targets are all required for array signal processing. Based on the periodic phase shift of coherent pulse sequence waveform, a new estimation of multi-targets＇ 2-Dimentional （2-D） DOA angle, Doppler frequency shift and relative time-delay is proposed. Based on a virtual sensor array constructed by pulse cumulating, the estinaations of azimuth, elevation, Doppler frequency shift and time-delay can be obtained simultaneously, and the least number of pulses could be two. This method is computationally efficient even in heavier noised environment, and all estimations are automatically paired in calculation process with no used to any plane sensor array and deal with many spectrum searching. Further more, this algorithm can be targets at the same time only by few sensors. The targets number that can deal with simultaneously is several times to the sensor number, which is the upper limit for normal algorithms such as ESPRIT and MUSIC. These characteristics would be very useful, especially, for aerial systems. Simulations demonstrate the capabilities of this method efficiently.

Advanced Irrigation Engineering： Precision and Precise

Irrigation advances in precision irrigation （PI） or site specific irrigation （SSI） have been considerable in research; however, commercialization lags. SSI/PI has applications when soil texture variability affects soil water holding capacity or when crop yield or biotic stresses （insects or diseases） are spatially variable. SSI/PI uses variable rate application technologies, mainly with center-pivots or lateral-move or linear irrigation machines, to match crop needs or soil water holding constraints. Variable rate applications are achieved by variable nozzle flow rates, pulsing nozzle flows, or multiple nozzles on separate submains. Newer center pivot and linear machines are controlled by on-board microprocessor systems that can be integrated with supervisory control and data acquisition controllers for both communication and control of the variable rate application for specific sets of nozzles or individual nozzles for management zones. Communication for center pivot or linear controllers typically uses radio telemetry, wireless interact links, or cellular telephones. Precision irrigation has limited utility without precise irrigation scheduling （temporally and spatially）. Plant or soil sensors are used to initiate or complete an irrigation event. Automated weather stations provide site information for determining the irrigation requirement using crop models or simpler reference evapotranspiration （ET）, data to be used with crop coefficients. Remote sensing is being used to measure crop water status or crop development from spectral reflectance. Near-surface remote sensing with sensors mounted on moving irrigation systems provide critical spatial integration from point weather networks and feedback on crop ET and irrigation controls in advanced automated systems for SSI/PI.

The Representation of a Broadband Vector Field

Compared to a scalar pressure sensor, a vector sensor can provide a higher signal-to-noise ratio （SNR） signal and more detailed intbrmation on the sound field. Study on vector sensors and their applications have become a hot topic. Research on the representation of a vector field is highly relevant for extending the scope of vector sensor technology. This paper discusses the range-frequency distribution of the vector field due to a broadband acoustic source moving in a shallow-water waveguide as the self noise of a surface ship, and the vector extension of the waveguide impulse response measured over a limited frequency range using an active source of known waveform. From theory analysis and numerical simulation, the range-frequency representation of a vector field exhibits an interference structure qualitatively similar to that of the corresponding pressure field but, being quantitatively different, provides additional information on the waveguide, especially through the vertical component. For the range-frequency representation, physical quantities that can better exhibit the interference characteristics of the wavegaide are the products of pressure and particle velocity and of the pressure and pressure gradient. An image processing method to effectively detect and isolate the individual striations from an interference structure was reviewed briefly. The representation of the vector impulse response was discussed according to two different measurement systems, also known as particle velocity and pressure gradient. The vector impulse response representation can not only provide additional information from pressure only but even more than that of the range-frequency representation.

Ionic effects on the transport characteristics of nanowire-based FETs in a liquid environment

For the development of ultra-sensitive electrical bio/chemical sensors based on nanowire field effect transistors （FETs）, the influence of the ions in the solution on the electron transport has to be understood. For this purpose we establish a simulation platform for nanowire FETs in the liquid environment by implementing the modified Poisson-Boltzmann model into Landauer transport theory. We investigate the changes of the electric potential and the transport characteristics due to the ions. The reduction of sensitivity of the sensors due to the screening effect from the electrolyte could be successfully reproduced. We also fabricated silicon nanowire Schottky-barrier FETs and our model could capture the observed reduction of the current with increasing ionic concentration. This shows that our simulation platform can be used to interpret ongoing experiments, to design nanowire FETs, and it also gives insight into controversial issues such as whether ions in the buffer solution affect the transport characteristics or not.

Fiber Optic Interrogation Systems for Hypervelocity and Low Velocity Impact Studies

The aim of this project was to develop non-contact fiber optic based displacement sensors to operate in the harsh environment of a ＂light gas gun＂ （LGG）, which can ＂fire＂ small particles at velocities ranging from 1 km/s-8.4km/s. The LGG is used extensively for research in aerospace to analyze the effects of high speed impacts on materials. Ideally the measurement should be made close to the center of the impact to minimize corruption of the data from edge effects and survive the impact. We chose to develop a non-contact ＂pseudo＂ confocal intensity sensor, which demonstrated resolution comparable with conventional polyvinylidene fluoride （PVDF） sensors combined with high survivability and low cost. A second sensor was developed based on ＂fiber Bragg gratings＂ （FBG） to enable a more detailed analysis of the effects of the impact, although requiring contact with the target the low weight and very small contact area of the FBG had minimal effect on the dynamics of the target. The FBG was mounted either on the surface of the target or tangentially between a fixed location. The output signals from the FBG were interrogated in time by a new method. Measurements were made on carbon fiber composite plates in the LGG and on low velocity impact tests. The particle momentum for the low velocity impact tests was chosen to be similar to that of the particles used in the LGG.