期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
激光干涉仪测微冲量原理 被引量:6
1
作者 王广宇 金星 叶继飞 《推进技术》 EI CAS CSCD 北大核心 2007年第5期530-533,共4页
对激光干涉仪测量微冲量的原理进行了初步研究,将激光与靶材相互作用产生的微冲量转化为冲击摆的微幅振动,通过激光干涉仪辨识此振动以获得冲量。激光干涉仪可分辨出λ/8的微振动,为精确测量微冲量提供了可靠的保证。理论分析表明,研究... 对激光干涉仪测量微冲量的原理进行了初步研究,将激光与靶材相互作用产生的微冲量转化为冲击摆的微幅振动,通过激光干涉仪辨识此振动以获得冲量。激光干涉仪可分辨出λ/8的微振动,为精确测量微冲量提供了可靠的保证。理论分析表明,研究工作对在作用力时间不可忽略条件下精确测量10-4N.s量级以下的微冲量具有意义。 展开更多
关键词 激光等离子体 推力器 激光干涉仪 ^微冲量测量^+ ^冲击摆^+
下载PDF
Application of Charpy Impact Absorbed Energy to the Safety Assessment Based on SINTAP
2
作者 王东坡 邓彩艳 +1 位作者 张玉凤 霍立兴 《Transactions of Tianjin University》 EI CAS 2006年第2期116-120,共5页
The European Structural Integrity Assessment Procedure(SINTAP) was applied to the assessment of welded joints of the API 5L X65 pipeline steel with an assumed embedded flaw and surface flaw at the weld toe. At defau... The European Structural Integrity Assessment Procedure(SINTAP) was applied to the assessment of welded joints of the API 5L X65 pipeline steel with an assumed embedded flaw and surface flaw at the weld toe. At default level( level 0), the assessment point was established by esti- mating fracture toughness value K1c conservatively from Charpy energy test data. At the same time, the analysis level 1 (basic level)was applied based on the fracture toughness CTOD. Then the two assessment levels were compared. The assessment results show that all assessment points are located within the failure lines of analysis levels 0 and 1. So the welded joint of the pipeline is safe. It can be concluded that the assessment based on Charpy absorbed energy is practicable when other fracture toughness data are not available, or cannot be easily obtained. The results are conservative. 展开更多
关键词 failure assessment diagram Charpy impact energy CTOD safety assessment
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部