变量柱塞泵“卡盘”新工艺及冷冲模

该文中零件"卡盘"属于粉末冶金模压件,由于该零件形状复杂、尺寸及位置度要求高,在国内生产该产品,一是价格高,二是精度达不到要求。为此,在工艺上用机加材料(氮化钢)替代粉末冶金模压件,而在机加件上的"9-R13+0.4"弧形缺口在底部的残余料无法去除,通过设计制造冷冲模,解决了该难题,并保证了卡盘的尺寸精度及位置度要求,为后续的新品研发开辟了一条新的工艺途径。

A Study on Modelling Surface Finish in Electrical Discharge Machining Tablet Shape Punches Using Response Surface Methodology

This paper introduces a study on modelling surface finish in EDM （Electrical Discharge Machining） of tablet shape punches when using copper as electrode material. In this study, 27 experiments were performed based on BBD （Box-Behnken Design） and the work-piece material was 9CrSi steel. The input process parameters were the current, the pulse on time, the pulse off time and the voltage. The effects of the input parameters on the surface finish were evaluated by analysing variance. Besides, from the results of the experiments, a regression equation for determining the surface roughness is introduced. Also, the optimum input parameter values were found in order to get the minimum surface roughness.

High-Speed Numeral Filter in Impulse Voltage Measurement

Since the CPU of embed system has some limitation in operating speed, a new filter was put forward which implemented mountain template convolution by performing rectangle template convolution two times. It can obtain time and frequency localization with computational complexity greatly reduced. This algorithm was applied to lightning waveforms (include chopped waveforms) parameter calculation. It simplifies the computation and the results pretreated by this algorithm are in accord with IEC1083-2 completely. It was applied in embed system successfully. Its capability in frequency restraining was researched. The validity of the algorithm was proved in theory when processing lightning waves. The standard sources and the processing results are consistent completely.

Initiation and evolution of the South China Sea: an overview

Different models have been proposed for the formation and tectonic evolution of the South China Sea （SCS）, including extrusion of the Indochina Peninsula, backarc extension, two-stage opening, proto-SCS dragging, extension induced by a mantle plume, and integrated models that combine diverse factors. Among these, the extrusion model has gained the most attention. Based on simplified physical experiments, this model proposes that collision between the Indian and Eurasian Plates resulted in extrusion of the Indochina Peninsula, which in turn led to opening of the SCS. The extrusion of the Indochina Peninsula, however, should have led to preferential open- ing in the west side of the SCS, which is contrary to observations. Extensional models propose that the SCS was a backarc basin, rifted off the South China Block. Most of the backarc extension models, however, are not compatible with observations in terms of either age or subduction direction. The two-stage extension model is based on extensional basins surrounding the SCS. Recent dating results indeed show two-stage opening in the SCS, but the Southwest Subbasin of the SCS is much younger, which contradicts the two-stage extension model. Here we pro- pose a refined backarc extension model. There was a wide Neotethys Ocean between the Australian and Eurasian Plates before the Indian-Eurasian collision. The ocean floorstarted to subduct northward at ~ 125 Ma, causing backarc extension along the southem margin of the Eurasian Plate and the formation of the proto-SCS. The Neotethys sub- duction regime changed due to ridge subduction in the Late Cretaceous, resulting in fold-belts, uplifting, erosion, and widespread unconformities. It may also have led to the subduction of the proto-SCS. Flat subduction of the ridge may have reached further north and resulted in another backarc extension that formed the SCS. The rollback of the fiat subducting slab might have occurred ~ 90 Ma ago; the second backarc extension may have initiated between 50 and 45 Ma. The opening of the Southwest Subbasin is roughly simultaneous with a ridge jump in the East Sub- basin, which implies major tectonic changes in the sur- rounding regions, likely related to major changes in the extrusion of the Indochina Peninsula.

Research of multi-channel impulse noise detection algorithms based on template

Attenuating the undesired audio noise generated by impulse noise,such as shot and scream of brakes,is specially useful for real-time audio recording of TV or broadcasting live report.On the basis of impulse noise detection algorithms based on template,this paper improves the method of establishing the template by using multiple microphones to pick up noise corrupted signals and impulse noises in the environment.The universal of thresholds is found and a detection algorithm with slope as the characteristic is proposed by comparing a variety of feature extraction algorithms.The proposed algorithm gets a significant improvement in testing speed and accuracy,which means it is suitable for real-time processing of audio signals.

A New Model of Lithosphere Deformation Beneath the Okinawa Trough Based on Gravity Data

The Ryukyu trench-arc system can be divided into two types according to its subduction model. The normal subduction in the northern part of the Philippine Sea plate creates a hinge sedimentary wedge with large deformation at the collision front, while the oblique subduction in the southern part gives rise to a smaller accretion with small deformation than that in the northern part. The mechanisms that cause the distinction between these two types have been analysed and calculated by using gravity data based on the lithosphere rheology and the stress state of the lithosphere in the subduction boundary. The two types of subduction model are associated with the internal extension in the southern Okinawa Trough and the small extension in the northern part. The difference of the stress state between the two types of subduction model is also manifested in other tectonic features, such as topography, volcanic activity and crust movement. Modeling bathymetric and gravity data from this area suggests that the oblique subduction of low angle, together with smooth geometry of the overlying plate crust, results in small stress released on the south of the trench by the subduction plate. The intraplate faults in the southern Okinawa Trough behind the trench stand in surplus intensive stress. On the other hand, the normal subduction of high angle, together with strong undulation geometry of the overlying crust, results in more intensive stress released in the northern Ryukyu Trench than that in the south. The intraplate faults in the northern Okinawa Trough behind the northern Ryukyu Trench stand in small stress.

预防精密冲压模具经年变寸的方法

提出了预防精密模具及零件的"经年变寸"的方法及最佳热处理工艺。具体工艺方法和工艺参数是:模板线切割后先做一次650℃去应力退火;然后在真空炉中经过650℃和850℃预热,1 010℃加热,高压气淬;随后立即在-196℃深冷一次;接着250℃回火两次,最后200℃回火一次。生产实践证明,经过上述工艺处理的模板,残余奥氏体降至3%,变形量仅为0.000 8 mm。结果表明,用新工艺处理后的模板尺寸稳定性大大提高了,使用寿命也明显延长了。