The effects of laser shock peening(LSP)on the microstructural evolution and mechanical properties of the Ti6242 alloy,including the residual stress,surface roughness,Vickers microhardness,tensile mechanical response,a...The effects of laser shock peening(LSP)on the microstructural evolution and mechanical properties of the Ti6242 alloy,including the residual stress,surface roughness,Vickers microhardness,tensile mechanical response,and high-cycle fatigue properties,were studied.The results showed that the LSP induced residual compressive stresses on the surface and near surface of the material.The maximum surface residual compressive stress was−661 MPa,and the compressive-stress-affected depth was greater than 1000μm.The roughness and Vickers micro-hardness increased with the number of shocks,and the maximum hardness-affected depth was about 700μm after three LSP treatments.LSP enhanced the fraction of low-angle grain boundaries,changed the grain preferred orientations,and notably increased the pole density ofαphase on the near surface from 2.41 to 3.46.The surface hardness values of the LSP samples increased with the increase of the number of shocks due to work hardening,while the LSP had a limited effect on the tensile properties.The high-cycle fatigue life of the LSP-treated sample was significantly enhanced by more than 20%compared with that of the untreated sample,which was caused by the suppression of the initiation and propagation of fatigue cracks.展开更多
Dynamic processes of CO2 are experimentally studied in intense femtosecond laser fields with laser intensity varying from 1×10^13 W/cm^2 to 6×10^14 W/cm^2. When the laser intensity is below the ionization th...Dynamic processes of CO2 are experimentally studied in intense femtosecond laser fields with laser intensity varying from 1×10^13 W/cm^2 to 6×10^14 W/cm^2. When the laser intensity is below the ionization threshold, a coherent rotational wave-packet is formed for CO2 at room temperature through nonadiabatic rotational excitation. The evolution of the wave-packet leads to transient alignment. The field-free alignment revives periodically after the laser pulse is over. The revival structure can be modified by a second laser pulse for the rotational wave-packet through precisely adjusting the time delays between the two laser pulses. When the laser intensity excesses the ionization threshold, ionization and Coulomb explosion occur. The atomic ions C^m＋ （re=1-3） and On＋ （n=1-3） observed in the experiment exhibit highly anisotropic angular distributions relative to the laser polarization. Using two linearly polarized laser pulses with crossed polarization, we conclude that the anisotropic angular distribution results from dynamic alignment, in which the rising edge of the laser pulse aligns the neutral CO2 along the laser polarization direction prior to ionization.展开更多
Strong, normal shock wave, terminating a local supersonic area on an airfoil, not only limits aerodynamic performance but also becomes a source of a high-speed impulsive helicopter noise. The application of a passive ...Strong, normal shock wave, terminating a local supersonic area on an airfoil, not only limits aerodynamic performance but also becomes a source of a high-speed impulsive helicopter noise. The application of a passive control system （a cavity covered by a perforated plate） on a rotor blade should reduce the noise created by a moving shock. This article covers the numerical implementation of the Bohning/Doerffer transpiration law into the SPARC code and includes an extended validation against the experimental data for relatively simple geometries of transonic nozzles. It is a first step towards a full simulation of a helicopter rotor equipped with a noise reducing passive control device in hover and in forward flight conditions.展开更多
In the present work we elucidate the thermodynamic mechanisms of femtosecond(fs)laser ablation of amorphous polystyrene by means of molecular dynamics(MD)simulations.The effects of extrinsic parameter of laser pulse i...In the present work we elucidate the thermodynamic mechanisms of femtosecond(fs)laser ablation of amorphous polystyrene by means of molecular dynamics(MD)simulations.The effects of extrinsic parameter of laser pulse intensity and intrinsic parameter of molecular architecture on the laser ablation are further studied.Simulation results show that the laser ablation-induced polymeric material removal is achieved by evaporation from the surface and expansion within the bulk.Furthermore,inter-chain sliding and intra-chain change also play important roles in the microscopic deformation of the material.It is found that both the laser pulse intensity and the arrangement of phenyl groups have significant influence on the fs laser ablation of polystyrene.展开更多
Using a variational approach,the propagation of a moderately intense laser pulse in a parabolic preformed plasma channel is investigated.The effects of higher-order relativistic nonlinearity (HRN) and wakefield are in...Using a variational approach,the propagation of a moderately intense laser pulse in a parabolic preformed plasma channel is investigated.The effects of higher-order relativistic nonlinearity (HRN) and wakefield are included.The effect of HRN serves as an additional defocusing mechanism and has the same order of magnitude in the spot size as that of the transverse wakefield (TWF).The effect of longitudinal wakefield is much larger than those of HRN and TWF for an intense laser pulse with the pulse length equaling the plasma wavelength.The catastrophic focusing of the laser spot size would be prevented in the present of HRN and then it varies with periodic focusing oscillations.展开更多
基金the National Natural Science Foundation of China(No.52205240).
文摘The effects of laser shock peening(LSP)on the microstructural evolution and mechanical properties of the Ti6242 alloy,including the residual stress,surface roughness,Vickers microhardness,tensile mechanical response,and high-cycle fatigue properties,were studied.The results showed that the LSP induced residual compressive stresses on the surface and near surface of the material.The maximum surface residual compressive stress was−661 MPa,and the compressive-stress-affected depth was greater than 1000μm.The roughness and Vickers micro-hardness increased with the number of shocks,and the maximum hardness-affected depth was about 700μm after three LSP treatments.LSP enhanced the fraction of low-angle grain boundaries,changed the grain preferred orientations,and notably increased the pole density ofαphase on the near surface from 2.41 to 3.46.The surface hardness values of the LSP samples increased with the increase of the number of shocks due to work hardening,while the LSP had a limited effect on the tensile properties.The high-cycle fatigue life of the LSP-treated sample was significantly enhanced by more than 20%compared with that of the untreated sample,which was caused by the suppression of the initiation and propagation of fatigue cracks.
基金V. ACKNOWLEDGMENTS This work was supported by the National Natural Science Foundation of China （No.20603001, No.10534010, and No.10821062） and the National Basic Research Program of China （No.2006CB806007）.
文摘Dynamic processes of CO2 are experimentally studied in intense femtosecond laser fields with laser intensity varying from 1×10^13 W/cm^2 to 6×10^14 W/cm^2. When the laser intensity is below the ionization threshold, a coherent rotational wave-packet is formed for CO2 at room temperature through nonadiabatic rotational excitation. The evolution of the wave-packet leads to transient alignment. The field-free alignment revives periodically after the laser pulse is over. The revival structure can be modified by a second laser pulse for the rotational wave-packet through precisely adjusting the time delays between the two laser pulses. When the laser intensity excesses the ionization threshold, ionization and Coulomb explosion occur. The atomic ions C^m＋ （re=1-3） and On＋ （n=1-3） observed in the experiment exhibit highly anisotropic angular distributions relative to the laser polarization. Using two linearly polarized laser pulses with crossed polarization, we conclude that the anisotropic angular distribution results from dynamic alignment, in which the rising edge of the laser pulse aligns the neutral CO2 along the laser polarization direction prior to ionization.
文摘Strong, normal shock wave, terminating a local supersonic area on an airfoil, not only limits aerodynamic performance but also becomes a source of a high-speed impulsive helicopter noise. The application of a passive control system （a cavity covered by a perforated plate） on a rotor blade should reduce the noise created by a moving shock. This article covers the numerical implementation of the Bohning/Doerffer transpiration law into the SPARC code and includes an extended validation against the experimental data for relatively simple geometries of transonic nozzles. It is a first step towards a full simulation of a helicopter rotor equipped with a noise reducing passive control device in hover and in forward flight conditions.
基金supported by the National Natural Science Foundation of China(Grant Nos.51275114 and 51006093)the Laboratory of Precision Manufacturing Technology in China Academy of Engineering Physics(Grant No.zz13010)the Fundamental Research Funds for the Central Universities,China(Grant No.HIT.NSRIF.2013050)
文摘In the present work we elucidate the thermodynamic mechanisms of femtosecond(fs)laser ablation of amorphous polystyrene by means of molecular dynamics(MD)simulations.The effects of extrinsic parameter of laser pulse intensity and intrinsic parameter of molecular architecture on the laser ablation are further studied.Simulation results show that the laser ablation-induced polymeric material removal is achieved by evaporation from the surface and expansion within the bulk.Furthermore,inter-chain sliding and intra-chain change also play important roles in the microscopic deformation of the material.It is found that both the laser pulse intensity and the arrangement of phenyl groups have significant influence on the fs laser ablation of polystyrene.
基金Supported by the National Natural Science Foundation of China under Grant Nos.11047152,11147005,and 11178002the Natural Science Foundation of Jiangxi Province under Grant Nos.2010GQW0048 and 20122BAB202003
文摘Using a variational approach,the propagation of a moderately intense laser pulse in a parabolic preformed plasma channel is investigated.The effects of higher-order relativistic nonlinearity (HRN) and wakefield are included.The effect of HRN serves as an additional defocusing mechanism and has the same order of magnitude in the spot size as that of the transverse wakefield (TWF).The effect of longitudinal wakefield is much larger than those of HRN and TWF for an intense laser pulse with the pulse length equaling the plasma wavelength.The catastrophic focusing of the laser spot size would be prevented in the present of HRN and then it varies with periodic focusing oscillations.
