Analysis of the Economical, Ecological and Quality Advantages Consequent Resulting from Initiation of Technology Integrated in Metallurgy

Metallurgical sector plays an important role in the economy of each country because steel products present essential raw material for basic industries. Changes in the sectors of iron, steel and non-ferrous metals and the current development of technology forces the steel mills increased productivity, reduce production costs while ensuring to obtain a product with the required properties and to improve the competitiveness of enterprises in the global market. Currently, the most popular in meeting these requirements, enjoys a method of integration which combines individual operations into one integrated whole. The use of modem, perfectly designed, fully automated design of mechanical, hydraulic and measurement allowed us to achieve an innovative line of production. This article presents the general characteristics of the steel industry and a description of the latest integrated technology currently used in foundries and rolling mills. It also presents examples of the use of integrated technologies in metallurgy and the effects of economic, environmental and quality resulting from their use on an industrial scale.

Hot compressive deformation behavior of an in-situ TiB whisker reinforced Ti matrix composite

An in-situ TiB whisker reinforced Ti matrix (TiBw/Ti) composite is fabricated by powder metallurgy technique followed by hot extrusion. Hot compressive deformation behavior of the composite, in which the TiB whiskers were oriented along the extruded direction, is investigated. The results indicate that the hot compressive resistance of the TiBw/Ti composite is higher than that of the unreinforced Ti, and hot compressive resistance of the composite in the direction parallel to the whisker orientation is higher than that in the direction perpendicular to the whisker orientation. The hot compressive resistance of the composite increases with increasing strain rate and decreasing temperature. With increasing test temperature, the rate of the decrement of the compressive flow stress of the composite is higher than that of the unreinforced Ti. With increasing amount of compressive deformation, more and more TiB whiskers rotate and break during deformation. The rotation of the whiskers is easier at higher temperature, while, at lower temperature it becomes more difficult and whisker breakage becomes much more serious.

Experimemal study on improving the durability of concrete with Mineral Powder and Activator

An equivalent amount of metallurgical slag, water-quenched slag powder and activator was substituted for a part of cement to prepare concretes at strength grades ofC25, C30 and C40. Thanks to the filling effect, pozzolanic effect, raicro-aggregate effect, and improvement of pore structure, the prepared concretes not only had greater strength compared with reference concrete, but also had greater impermeability and frost-resistance. Moreover, the expansion reactions between alkali and aggregates were effectively inhibited. The slag and activator can serve as the raw materials for green concretes.

Effect of cold working and annealing on microstructure and properties of powder metallurgy high entropy alloy

An equiatomic CoCrFeNiMn high entropy alloy （HEA） was produced by powder metallurgy method. Cold rolling followed by subsequent annealing was conducted to further optimize the microstructure and mechanical properties. The results show that the SPSed CoCrFeNiMn HEA has an equiaxed single fcc phase microstructrue. Cold rolling results in extensive dislocation pile-up and twinning within the grains. The 80% cold-rolled alloy shows very high yield strength of 1292 MPa, but a limited elongation of 3%. Subsequent annealing produces recrystallization and precipitation of fine a particles with particle size of 30-100 nm. The annealed alloy has a yield strength of 540 MPa, which is about two to three times of the cast CoCrFeNiMn HEA, while still maintains a high tensile ductility of 41%. The improvement of the tensile properties is caused by the grain boundary strengthening, solid solution strengthening, and precipitation strengthening.