合成冷交阻力上涨分析及处理

合成循环机是氨合成工艺中的重要设备,其是否能够正常,对于整个工艺的顺利进行具有决定性作用。本文通过对合成冷交阻力上涨原因的分析,制定相应的处理方法,已保证合成氨装置的稳定运行。

稀释冷冻脱蜡工艺的研究

稀释冷冻脱蜡是一种新的脱蜡工艺.本文着重阐明它的基本原理.根据工业试验的结果,滤速提高10～40％;脱蜡油收率增加约7％;蜡的含油率降到约12％,对影响脱蜡效果的因素如喷射混合的作用;稀冷塔内的冷却速度;最适宜的溶剂冷却温度和进稀冷塔原料油的温度等进行初步探讨.

^(137)CS-γ射线在φ1800合成系统中的应用

详细介绍137CS-γ射线料位计实现φ1800合成系统氨分和冷交液位的测量并实现自动调节,达到了预期的效果。

Analysis and Evaluation Indicator Selection of Chilling Tolerance of Different Cotton Genotypes

[Objectivc] This study aimed to investigate the chilling tolerance of seedlings of different cotton genotypes and screen appropriate indicators for assess- ing chilling tolerance, to establish reliable mathematical evaluation model for chilling tolerance of cotton, thus providing theoretical basis for breeding and promoting new chilling-tolerant cotton germplasms and large-scale evaluation of chilling tolerance of cotton varieties. [Method] Fifteen cotton varieties （lines） were used as experimental materials. The photosynthetic gas exchange parameters, chlorophyll fluorescence ki- netic parameters, chlorophyll content, relative soluble sugar content, malonaldehyde content, relative proiine content, relative conductivity and other 12 physiological indi- cators of seedling leaves under low temperature treatment （5 ℃, 12 h） and recovery treatment （25 ℃. 24 h） were determined; based on the chilling tolerance coefficient （CTC） of various individual indicators, the comprehensive evaluation of chilling toler- ance was conducled by using principal component analysis, hierarchical cluster anal- ysis and stepwise regression analysis. [Result] The results showed that the 12 indi- vidual physiological indicators could be classified into 7 independent comprehensive components by principal component analysis; 15 cotton varieties （lines） were clus- tered into three categories by using membership function method and hierarchical cluster analysis; the mathematical model for evaluating chilling tolerance of cotton seedlings was established： D =0.275 -0.244Fo1 ＋0.206Fv/Fm1＋0.326g,%-0.056SS ＋ 0.225MDA＋O.O38REC （FF=0.995）, and the evaluation accuracy of the equation was higher than 94.25%,0. Six identification indicators closely related to chilling tolerance were screened, including Fo,, Fv/Fm1, Seedling leaves of cotton varieties （lines） gs2, SS, MDA, and REC. [Conclusion] with high chilling tolerance are less dam- aged under low temperature stress, and are able to maintain relatively high photo- synthetic electron transport capacity and high stomatal conductance after recovery treatment, which is contributed to gas exchange and recovery of photosynthetic ca- pacity. Determination of the six indicators under the same stress condition can be adopted for rapid identification and prediction of the chilling tolerance of other cotton varieties, which provides basis for the breeding, promotion, identification and screen- ing of chilling tolerant germplasms.

THE FREQUENCY CHARACTERISTICS OF WARM AND COLD EPISODES IN THE NIO REGIONS

On the basis of NOAA/CPC data of sea surface temperature anomaly in the Nifio regions during Jan. 1950 - Dec. 2003, the wavelet power spectrum of SST were studied with significance and confidence testing at different scales in this paper. It shows that the SST are provided with multi-time scales structure nested one another, and vary on scales of 2 - 7 years, 8 - 20 years and 〉30 years. The most significant variation of the warm and cold episodes is in the 4-year band of period. The power, frequency structure and confidence of the same episode are different in different Nino regions. The intensity of oscillations is increasing at low frequency bands and decreasing at high frequency bands from east to west in the Nino regions, especially after 1970.

Experimental investigation of key parameters pertinent to multi-hole orifice throttling characteristic

This study firstly defines a set of arrangement rule for perforated holes of multi-hole orifice(MO), and then presents three critical geometrical parameters including total number of performated hole, equivalent diameter ratio and distribution density of perforated holes, which are to quantify MO structure. This paper built the throttling test apparatus for nice test MO plates, which were designed according to orthogonal theory. The experiments were conducted to investigate the effect of three critical geometerical parameters on the pressure loss coefficient of test MOs. Results show that equivalent diameter ratio is the dominant prameter affecting MO throttling characterstic.

Is SrRuO_3 Spin Glass

Zero field cooled (ZFC) and field cooled (FC) DC magnetization and AC susceptibility of sintered SrRuO 3 were measured over the magnetic ordering temperature. The peak in susceptibility against temperature shifts to lower temperature when the bias field increases. As the field still increases, the peak breaks into two peaks. One peak still shifts to lower temperature; the other shifts to higher temperature. Zero bias field susceptibility was measured at different frequencies. The peak value decreases as the increase of frequency, but it does not shift to higher temperature as reported previously. The results show that SrRuO 3 is not spin glass, but ferromagnet.

Effect of airplane transport of donor livers on post-liver transplantation survival

AIM To evaluate the effect of long haul airplane transport of donor livers on post-transplant outcomes. METHODS A retrospective cohort study of patients who received a liver transplantation was performed in Perth, Australia from 1992 to 2012. Donor and recipient characteristics information were extracted from Western Australian liver transplantation service database. Patients were followed up for a mean of six years. Patient and graft survival were evaluated and compared between patients who received a local donor liver and those who received an airplane transported donor liver. Predictors of survival were determined by univariate and multivariate analysis using cox regression.RESULTS One hundred and ninety-three patients received alocal donor liver and 93 patients received an airplane transported donor liver. Airplane transported livers had a significantly lower alanine transaminase(mean: 45 U/L vs 84 U/L, P = 0.035), higher donor risk index(mean: 1.88 vs 1.42, P < 0.001) and longer cold ischemic time(CIT)(mean: 10.1 h vs 6.4 h, P < 0.001). There was a weak correlation between CIT and transport distance(r2 = 0.29, P < 0.001). Mean follow up was six years and 93 patients had graft failure. Multivariate analysis found only airplane transport retained significance for graft loss(HR = 1.92, 95%CI: 1.16-3.17). One year graft survival was 0.88 for those with a local liver and was 0.71 for those with an airplane transported liver. One year graft loss was due to primary graft non-function or associated with preservation injury in 20.8% of recipients of an airplane transported liver compared with 4.6% in those with a local liver(P = 0.027). CONCLUSION Airplane transport of donor livers was independently associated with reduced graft survival following liver transplantation.

Influences of Cold Storage at 5℃ for Different Durations on Oviposition of Female Silkworm Moths

In order to investigate the resistance of female silkworm moths to cold storage and their copulation and oviposition after cold storage, copulation and ovipo- sition experiments of Liangguang 2 silkworms and Guican 1 female silkworm moths were conduced under cold storage at 5 ~C for different durations. The results indi- cated that, after cold storage at 5 ~C with relative humidity of 75%, the resistance of female silkworm moths to cold storage varied with different varieties; to be specific, 9-Fu and 7.Xiang, parent silkworm varieties of Liangguang 2 with ancestry of mul- tivoltinism, were relatively resistant to cold storage, and their copulation capability was still at a high level after cold storage for 72 h. Oviposition capability also varied with different varieties and durations; to be specific, under 5 ~C conditions, between two parent silkworm varieties of Liangguang 2, female silkworm moths of 9-Fu achieved the best results within cold storage duration of 24 h, female silkworm moths of 7.Xiang achieved the best results within cold storage duration of 72 h; be- tween two parent silkworm varieties of Guican 1, female silkworm moths of Xinhang achieved the best results without cold storage, female silkworm moths of 826 achieved the best results within cold storage duration of 48 h.

Analyses of concrete microcosmic structure in multi-media environment

The structure of concrete generally serves in multi-media environments; various environments act differently on concrete. The compound action of some severe environments will threaten the duration of concrete and decrease the service life of a concrete structure if improperly handled. In this paper the microstructure of concrete is observed by using Scanned Electric Microscope (SEM) through contrasting experiments in media of acid, alkali and salt with that of freezing-thawing in the same medium environment. This study is to supply a certain basis for changing traditional thinking of mechanical design and to combine construction reliability design with durability of concrete design.

Temperature distribution of the incompletely mixed fluid flowing in the tubes and the unmixed fluid crossing over the tubes

A new model is established to describe heat exchanging of the incompletely mixed fluid flowing in the tubes and the unmixed fluid crossing out of the tubes in the heat-exchangers especially in air cooler. In the model, a new method of analyzing volume is proposed to develop the temperature distribution equations of the two fluids --tw（x） and ta（X,,7＂）. With tw（x） and ta （x, ,7）, the curves of the temperature distribution of the two fluids can be obtained. Also tw（x） and ta（x,n） can be used to calculate parameters of structure of an air cooler and to improve performances of it.

A novel experimental setup with sand trunk for heat extraction of geothermal heat exchanger

A novel experimental setup was developed to study the heat extraction of geothermal heat exchanger(GHE)in different operational modes under adiabatic and isothermal boundaries.The experimental setup consists of a sand trunk,a tailored water chiller,a natural cold source unit,two water boxes containing hot water and cool water,and a data acquisition system.The experimental results indicate that the volume flow rate of the entering water is a main factor affecting the heat extraction;furthermore,the heat extraction value per meter pipe decreases gradually along the heat extraction pipe and increases with the increase of the incoming water volume flow rate.Therefore,this novel experimental setup may be helpful to further study the operation performance of GHE in different types of soil.

Influence of input acoustic power on regenerator's performance

Performance of a pulse tube cooler significantly depends on the efficient operation of its regenerator. Influence of input acoustic power on regenerator's performance is simulated and analyzed with simple harmonic analysis method. Given regenera-tor's dimensions and pressure ratio,there is an optimal input acoustic power for achieving a highest coefficient of performance,due to a compromise between relative time-averaged total energy flux in regenerator and relative acoustic power at regenerator's cold end. Additionally,optimal dimensions of regenerator are also estimated and presented for different input acoustic powers. The computed optimal diameter obviously increases with increase of input acoustic power,while the optimal length decreases slightly,and as a result,a larger input acoustic power requires a smaller aspect ratio (length over diameter).

Graph-enhanced neural interactive collaborative filtering

To improve the training efficiency and recommendation accuracy in cold-start interactive recommendation systems,a new graph structure called item similarity graph is proposed on the basis of real data from a public dataset.The proposed graph is built from collaborative interactions and a deep reinforcement learning-based graph-enhanced neural interactive collaborative filtering(GE-ICF)model.The GE-ICF framework is developed with a deep reinforcement learning framework and comprises an embedding propagation layer designed with graph neural networks.Extensive experiments are conducted to investigate the efficiency of the proposed graph structure and the superiority of the proposed GE-ICF framework.Results show that in cold-start interactive recommendation systems,the proposed item similarity graph performs well in data relationship modeling,with the training efficiency showing significant improvement.The proposed GE-ICF framework also demonstrates superiority in decision modeling,thereby increasing the recommendation accuracy remarkably.

Condensing Heat Exchanger

The paper shows a method of designing a heat exchanger recovering heat from the condensation of water vapour contained in flue gases. A heat exchanger condenses water vapour and SO2 （sulphur dioxide） in the presence of inert gases （CO2, CO, N2, O2） contained in flue gases. A mathematical model and a sample design of a heat exchanger were presented. The heat exchange is capable of recovering from a dozen or so to several dozen percent of heat from flue gases escaping into the atmosphere. A second advantage of the heat exchanger is the possibility to reduce the emissions of SO2 considerably. Depending on the parameters, it can be even a sevenfold reduction in the emissions. The main mathematical tool used for designing the condensing heat exchanger is the Colburn-Hougen method. The authors omitted that part of the method which requires iterative calculations. The Mollier diagram was used instead.

Evolvement regularity of signal control parameters of urban road in cold region

In snow-icy road environment, the survey data indicate that the largest decrease in traffic flow running characters occurs when snow and ice begin to accumulate on the road surface. Saturation flow is decreased by 16% , speed is decreased by 30% , and start-up lost time is increased by 27%. Based on the signal control theory of HCM and Webster, the character values of traffic flow in different urban road environments were investigated, and the evolvement regularity of signal control parameters such as cycle, split, green time, offset, yellow time and red time in snow-icy road environment was analyzed. The impact factors and the changes in the scope of signal control parameters were achieved. Simulation results and practical application show that the signal control plan of road enviromnent without snow and ice will increase the vehicle delay, stop length and traffic congestion in snow-icy road environment. Thus, the traffic signal control system should address a suitable signal control plan based on different road environments.

Experimental Verification of Model for Liquid-Cooled Staggered Pin Fin Heat Sinks with Top Bypass Flow

Pressure drops and heat transfer over staggered pin fin heat sinks with top bypass flow were experimentally evaluated. The authors considered liquid-cooling applications because there were few data available comparing to air-cooling applications. Empirical equations to predict heat transfer on the endwall were developed by obtaining experimental data on the copper base plate with acrylic pins. A new model for predicting pressure drops and heat transfer over staggered pin fin heat sinks with top bypass flow based on mass, momentum, and energy conservation within the two control volumes is proposed. The first control volume in the model is located within the finned area, and the second is located in the gap between the tip of the pins and the flow channel. This model combines two conditions according to the boundary-layer thickness. A comparison between experimental and calculated results revealed that dimensionless pressure drops and the Nusselt number could be predicted within 30% error for the former and 50% error for the latter.

The Current Situation of the Study on Twisted Tape Inserts in Pipe Exchangers

Heat transfer enhancement is used in many applications including heat exchangers, air conditioning, and refrigeration systems; hence many researchers have conducted experimental and numerical researches on heat transfer enhancement and have developed various techniques and methods. As a passive heat transfer technique, twisted tapes are widely used in various industries for their cost savings, lower maintenance requirements and the fact that they are easily set up. This paper introduces the principle of heat transfer enhancement of twisted tapes and reviews some of the experimental works done by researchers on this technique in recent years. The variously modified twisted tape inserts are widely researched and used to enhance heat transfer efficiency for heat exchangers. Twisted tapes perform better in low Re conditions and in square tubes. However, they could also cause higher pressure drops. Twisted tapes have great potential and profound implications if they can be used in traditional heat exchangers. Besides this, some correlations between the Nusselt number and friction factors are presented in this paper.