Superluminescence diode(SLD) modules with wide spectrum characteristics are required in fiber gyroscopes. A 1.3 μm butterfly packaged superluminescence diode with the spectrum width over 30 nm is reported and recent ...Superluminescence diode(SLD) modules with wide spectrum characteristics are required in fiber gyroscopes. A 1.3 μm butterfly packaged superluminescence diode with the spectrum width over 30 nm is reported and recent advances in process of SLD is described in the paper. The SLD modules have been applied to fiber gyroscopes.展开更多
With the consideration of the thermal management and heat sink requirements,a cooling device is designed and the thermal resistance of this device is calculated with a single 5 W power LED.The thermal design of a sing...With the consideration of the thermal management and heat sink requirements,a cooling device is designed and the thermal resistance of this device is calculated with a single 5 W power LED.The thermal design of a single 5 W power LED is reasonable,effective and the result has been simulated.This design also instruct other power LEDs' thermal design.Provided is a reliable and effective method for the design of power LED illumination lamps and lanterns.展开更多
The design,fabrication and performance of 1.3μm superluminescent diodes are reported.A InP window structure and a passive absorber waveguide in different plane are applied to suppress lasing oscillation.A buried cres...The design,fabrication and performance of 1.3μm superluminescent diodes are reported.A InP window structure and a passive absorber waveguide in different plane are applied to suppress lasing oscillation.A buried crescent structure similar to a laser diode is introduced to achieve high output power.The output power of about 70O μW is coupled into a single-mode fiber at 150 mA and 25℃.Spectrum width is more than 30 nm.The devices operate in superluminescent state in the range from 0℃ to 60℃.展开更多
Using a set of traveling wave rate equations,a superluminescent diode with a low facet reflectivity is studied. Analytical expressions of the distributions of carrier density,forward- and backward-propagating photon d...Using a set of traveling wave rate equations,a superluminescent diode with a low facet reflectivity is studied. Analytical expressions of the distributions of carrier density,forward- and backward-propagating photon densities,and gain are obtained at different facet reflectivities.It is shown that the high nonuniform carrier distribution is evident in the case of low facet reflectivity.The results can serve as useful guides in understanding emission mechanism of superluminescent diodes.展开更多
The result of the evaporation of Sio/SiO2 two layer antireflection coatings monitored by the MODEL IL 400 DEPOSITION CONTROLLER is reported.A superluminescent diode with high output power is fabricated by evaporating ...The result of the evaporation of Sio/SiO2 two layer antireflection coatings monitored by the MODEL IL 400 DEPOSITION CONTROLLER is reported.A superluminescent diode with high output power is fabricated by evaporating antireflection coating on the front facet of 1.3μm buried heterostructure laser.展开更多
文摘Superluminescence diode(SLD) modules with wide spectrum characteristics are required in fiber gyroscopes. A 1.3 μm butterfly packaged superluminescence diode with the spectrum width over 30 nm is reported and recent advances in process of SLD is described in the paper. The SLD modules have been applied to fiber gyroscopes.
文摘With the consideration of the thermal management and heat sink requirements,a cooling device is designed and the thermal resistance of this device is calculated with a single 5 W power LED.The thermal design of a single 5 W power LED is reasonable,effective and the result has been simulated.This design also instruct other power LEDs' thermal design.Provided is a reliable and effective method for the design of power LED illumination lamps and lanterns.
文摘The design,fabrication and performance of 1.3μm superluminescent diodes are reported.A InP window structure and a passive absorber waveguide in different plane are applied to suppress lasing oscillation.A buried crescent structure similar to a laser diode is introduced to achieve high output power.The output power of about 70O μW is coupled into a single-mode fiber at 150 mA and 25℃.Spectrum width is more than 30 nm.The devices operate in superluminescent state in the range from 0℃ to 60℃.
文摘Using a set of traveling wave rate equations,a superluminescent diode with a low facet reflectivity is studied. Analytical expressions of the distributions of carrier density,forward- and backward-propagating photon densities,and gain are obtained at different facet reflectivities.It is shown that the high nonuniform carrier distribution is evident in the case of low facet reflectivity.The results can serve as useful guides in understanding emission mechanism of superluminescent diodes.
文摘The result of the evaporation of Sio/SiO2 two layer antireflection coatings monitored by the MODEL IL 400 DEPOSITION CONTROLLER is reported.A superluminescent diode with high output power is fabricated by evaporating antireflection coating on the front facet of 1.3μm buried heterostructure laser.
