In order to evaluate the heating performance of gas engine heat pump（GEHP） for air-conditioning and hot water supply, a test facility was developed and experiments were performed over a wide range of engine speed（1...In order to evaluate the heating performance of gas engine heat pump（GEHP） for air-conditioning and hot water supply, a test facility was developed and experiments were performed over a wide range of engine speed（1400-2600 r/min）, ambient air temperature（2.4-17.8 ℃） and condenser water inlet temperature（30-50℃）. The results show that as engine speed increases from 1400 r/min to 2600 r/min, the total heating capacity and energy consumption increase by about 30% and 89%, respectively; while the heat pump coefficient of performance（COP） and system primary energy ratio（PER） decrease by 44% and 31%, respectively. With the increase of ambient air temperature from 2.4 ℃ to 17.8 ℃, the heat pump COP and system PER increase by 32% and 19%, respectively. Moreover, the heat pump COP and system PER decrease by 27% and 15%, respectively, when the condenser water inlet temperature changes from 30 ℃ to 50 ℃. So, it is obvious that the effect of engine speed on the performance is more significant than the effects of ambient air temperature and condenser water inlet temperature.展开更多
An approach to design multi-channel cylinder dryer was proposed. The heat transfer performance and flow characteristic under various structural parameters were analyzed. First, an experiment was designed and set up to...An approach to design multi-channel cylinder dryer was proposed. The heat transfer performance and flow characteristic under various structural parameters were analyzed. First, an experiment was designed and set up to measure the condensing heat transfer coefficient and the pressure drop in order to ,~erify the applicability of the Cavallini＇s correlation. Then, the relationship among the count of channels, aspect ratio, spacing ratio, width, height and hydraulic diameter of a channel was given. Finally, the correlation of condensing heat transfer and the homogeneous model was introduced in order to observe the heat transfer performance and flow characteristic of the multi-channel cylinder dryer affected by different structures. The study reveals that the structural parameters including count of channels, aspect ratio, spacing ratio of a channel dramatically influence the condensation heat transfer coefficient and frictional resistance of the steam. Based on the selected paper machine, it is suggested that the overall performance of the multi-channel cylinder dryer is best if the count of channels is 150-200, the aspect ratio is 1 ： 3 and the spacing ratio is 1 ： 1-1 ： 3.展开更多
基金Project(hx2013-87)supported by the Qingdao Economic and Technology Development Zone Haier Water-Heater Co.Ltd.,China
文摘In order to evaluate the heating performance of gas engine heat pump（GEHP） for air-conditioning and hot water supply, a test facility was developed and experiments were performed over a wide range of engine speed（1400-2600 r/min）, ambient air temperature（2.4-17.8 ℃） and condenser water inlet temperature（30-50℃）. The results show that as engine speed increases from 1400 r/min to 2600 r/min, the total heating capacity and energy consumption increase by about 30% and 89%, respectively; while the heat pump coefficient of performance（COP） and system primary energy ratio（PER） decrease by 44% and 31%, respectively. With the increase of ambient air temperature from 2.4 ℃ to 17.8 ℃, the heat pump COP and system PER increase by 32% and 19%, respectively. Moreover, the heat pump COP and system PER decrease by 27% and 15%, respectively, when the condenser water inlet temperature changes from 30 ℃ to 50 ℃. So, it is obvious that the effect of engine speed on the performance is more significant than the effects of ambient air temperature and condenser water inlet temperature.
基金Acknowledgements This project is supported by the National Natural Science Foundation of China （Grant No. 51375286）, Natural Science Basic Research Plan in Shaanxi Province of China （Program No. 2012JZ7002） and the key scientific and technological innovation team fund of Shaanxi Province of China （Program No. 2014KCT- 15）.
文摘An approach to design multi-channel cylinder dryer was proposed. The heat transfer performance and flow characteristic under various structural parameters were analyzed. First, an experiment was designed and set up to measure the condensing heat transfer coefficient and the pressure drop in order to ,~erify the applicability of the Cavallini＇s correlation. Then, the relationship among the count of channels, aspect ratio, spacing ratio, width, height and hydraulic diameter of a channel was given. Finally, the correlation of condensing heat transfer and the homogeneous model was introduced in order to observe the heat transfer performance and flow characteristic of the multi-channel cylinder dryer affected by different structures. The study reveals that the structural parameters including count of channels, aspect ratio, spacing ratio of a channel dramatically influence the condensation heat transfer coefficient and frictional resistance of the steam. Based on the selected paper machine, it is suggested that the overall performance of the multi-channel cylinder dryer is best if the count of channels is 150-200, the aspect ratio is 1 ： 3 and the spacing ratio is 1 ： 1-1 ： 3.
