期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
冷变形钢件的球化退火 被引量:1
1
作者 蔡珣 包四平 《热加工工艺》 CSCD 北大核心 1991年第4期36-38,共3页
针对目前常规球化退火工艺周期长、能耗大、效率低的弊病,经过一系列工艺试验,推荐了一种适于冷拉钢丝、冷轧薄带的低于临界温度的球化退火新工艺。它不仅工艺简单、质量稳定,且省时节能,很值得推广应用。
关键词 冷变形钢 球化退火
下载PDF
应变时效对X70大变形钢冷弯管拉伸性能和组织的影响 被引量:5
2
作者 卿颖 杨眉 +2 位作者 晏利君 刘宇 叶刚 《材料热处理学报》 EI CAS CSCD 北大核心 2014年第12期155-159,共5页
将X70大变形管线钢管冷弯加工后进行不同温度时效处理,利用拉伸试验机和金相显微镜对其拉伸性能及显微组织开展研究。结果表明:230℃和250℃时效后,应力应变曲线出现屈服平台;时效后显微组织仍为铁素体+贝氏体(F+B),随时效温度上升,析... 将X70大变形管线钢管冷弯加工后进行不同温度时效处理,利用拉伸试验机和金相显微镜对其拉伸性能及显微组织开展研究。结果表明:230℃和250℃时效后,应力应变曲线出现屈服平台;时效后显微组织仍为铁素体+贝氏体(F+B),随时效温度上升,析出碳化物增多,材料屈强比增大,最高为0.93,应力比Rt1.5/Rt0.5减小,最低为1.01,均匀变形伸长率减小,最低为6.52%;受拉伸应变部位与受压缩应变部位相比,性能改变更明显,说明应变状态是影响应变时效后性能的主要因素;应变时效降低冷弯管塑性变形能力,综合涂覆效率及安全服役因素,防腐涂覆温度应在200℃左右为宜。 展开更多
关键词 X70大变形弯管 应变时效 变形能力
下载PDF
Influence of chemical composition and cold deformation on aging precipitation behavior of high nitrogen austenitic stainless steels 被引量:1
3
作者 李花兵 姜周华 +2 位作者 冯浩 朱红春 张祖瑞 《Journal of Central South University》 SCIE EI CAS 2013年第12期3354-3362,共9页
The influence of chemical composition and cold deformation on aging precipitation behavior of 18Cr-16Mn-2Mo-I.IN (HNS-A), 18Cr-16Mn-I.3N (HNS-B), 18Cr-18Mn-2Mo-0.96N (HNS-C) and 18Cr-18Mn-2Mo-0.77N (I-INS-D) h... The influence of chemical composition and cold deformation on aging precipitation behavior of 18Cr-16Mn-2Mo-I.IN (HNS-A), 18Cr-16Mn-I.3N (HNS-B), 18Cr-18Mn-2Mo-0.96N (HNS-C) and 18Cr-18Mn-2Mo-0.77N (I-INS-D) high nitrogen austenitic stainless steels was investigated. The results show that the "nose" temperatures and incubation periods of the initial time-temperature-precipitation (TTP) curves of aged HNSs are found to be 850 ℃, 60 s; 850 ℃, 45 s; 850 ℃, 60 s and 900 ℃, 90 s, respectively. Based on the analysis of SAD patterns, the coarse cellular Cr2N precipitate which presents a lamellar structure has a hexagonal structure of a=0.478 nm and c=0.444 nm. The Z phase corresponding to a composition of Fe36Cr^2Mo10, is determined to be a body-centered cubic structure ofa=0.892 nm. The precipitating sensitivity presents no more difference with the nitrogen content increasing from 0.77% to 0.96%, but exhibits so obviously that the cellular precipitates nearly overspread the whole field. The addition of Mo element can restrain the TTP curves moving left and down, which means decreasing the sensitivity of aging precipitation. With increasing the cold deformation, the sensitivity of precipitation increases obviously. 展开更多
关键词 high nitrogen austenitic stainless steel aging precipitation time-temperature-precipitation curve chemical composition cold deformation
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部