Electric product house of magnesium alloy sheet is usually obtained by warm stamping owing to its poor plasticity and formability at room temperature.The formability of AZ31B magnesium alloy sheet can be improved by r...Electric product house of magnesium alloy sheet is usually obtained by warm stamping owing to its poor plasticity and formability at room temperature.The formability of AZ31B magnesium alloy sheet can be improved by repeated unidirectional bending(RUB)process through control of(0002)basal texture.Compared with as-received sheet,the Erichsen value(IE)of the sheet underwent RUB process increases to 5.90 from 3.53 at room temperature.It is also confirmed that cell phone houses could be stamped successfully in crank press with AZ31B magnesium alloy sheets underwent RUB process.It provides an alternative to the electronics industry in the application of magnesium alloys.展开更多
In this paper, we study the influence ofeco materials for roof insulation and fiber-reinforced mortar coatings on cooling loads of a home in dry tropical climate. The walls of the house are made of cinderblock or late...In this paper, we study the influence ofeco materials for roof insulation and fiber-reinforced mortar coatings on cooling loads of a home in dry tropical climate. The walls of the house are made of cinderblock or laterite and the insulating material of a roof panel is made with lime （24%）, cement （6%）, water （50%） of vegetable fibers hibiscus sabdariffa （16%）, tree widespread in Burkina Faso and sugar cane bagasse （4%）. This panel roof insulation and the fiber-reinforced mortar were characterized at the Laboratory of Physics and Chemistry of the environment by the hot plate method. The building is modeled in TRNSYS using climate data from the city of Ouagadougou. The results obtained show that in the warmer months of the year, that is to say in March and April, the relative differences between heat gains the configurations ＂breeze block-coating mortar and roof not insulated＂ and ＂laterite- fiber-reinforced mortar coating and insulated roof＇ vary between 15.6% and 16.8%. The configuration ＂laterite-fiber-reinforced mortar coating and insulated roof allows a reduction of annual heat gains of 15.5% compared to the configuration ＂breeze block-coating mortar and roof not insulated＂.展开更多
According to the status of the northern rural architecture analysis, the prevalence of high energy consumption, low comfort features, it is essential to design energy-efficient buildings in rural areas. Article resear...According to the status of the northern rural architecture analysis, the prevalence of high energy consumption, low comfort features, it is essential to design energy-efficient buildings in rural areas. Article research and analyze the layout of rural buildings, a variety of energy-saving technologies and building design measures development and utilization of new energy sources and other issues that can make rural buildings to save energy and improve the environmental quality of living of farmers. It also put forward some reasonable suggestions for carrying out residential building energy efficiency in cold areas.展开更多
During last decades the solar passive heating of buildings found rather wide application. It has been used effectively in an estimated 17,000 commercial buildings in the United States-ranging from offices to schools, ...During last decades the solar passive heating of buildings found rather wide application. It has been used effectively in an estimated 17,000 commercial buildings in the United States-ranging from offices to schools, and airport terminals. At present there exist two main types of solar houses, ＂house collector＂ and ＂wall collector＂. A part of researchers find that the use of＂house collector＂ is more simple and efficient. The other part is sure that ＂wall collector＂ is more convenient to use and it has higher efficiency. But our analysis show that in existing literature there is not any method for evaluating efficiency of solar houses. Moreover, there is not in. use a concept on solar houses efficiency. To us each type of solar houses has its own advantages and disadvantages. In this paper solar passive ＂House-Collector＂ heating modes of houses and their efficiency are discussed. For calculation of designing parameters of solar houses a simplified method is presented, taking into consideration both the heat gains and heat losses.展开更多
In this work, commercially pure Zr sheets were subjected to β air cooling and then rolled to different reductions(10% and 50%)at room temperature. Microstructures of both the β-air-cooled and the rolled specimens we...In this work, commercially pure Zr sheets were subjected to β air cooling and then rolled to different reductions(10% and 50%)at room temperature. Microstructures of both the β-air-cooled and the rolled specimens were well characterized by electron channelling contrast imaging and electron backscatter diffraction techniques, with special attentions paid to their misorientation characteristics. Results show that the β-air-cooled specimen owns a Widmanst?tten structure featured by lamellar grains with typical phase transformation misorientations. The 10% rolling allows prismatic slip and tensile twinning({11-21}<11-2-6> and{10-12}<10-11>) to be activated profusely, which produce new low-angle(~3°–5°) and high-angle(~35° and ~85°) misorientation peaks, respectively. After increasing the rolling reduction to 50%, twinning is suppressed and dislocation slip becomes the dominant deformation mode, with the lamellar grains highly elongated and aligned towards the rolling direction.Meanwhile, only one strong low-angle misorientation peak related to the prismatic slip is presented in the 50%-rolled specimen,with all other peaks disappeared. Analyses on local misorientations reveal that hardly any residual strains exist in the β-air-cooled specimen, which should be related to their sufficient relaxation during slow cooling. Residual strains introduced by 10% rolling are heterogeneously distributed near grain/twin boundaries while heavier deformation(50% rolling) produces much larger residual strains pervasively existing throughout the specimen microstructure.展开更多
基金Project(50504019)supported by the National Natural Science Foundation of ChinaProject(2008BB4040)supported by the Science Foundation of Chongqing,ChinaProject(2008AA4028)supported by Scientific and Technological Project of Chongqing Science and Technology Commission,China
文摘Electric product house of magnesium alloy sheet is usually obtained by warm stamping owing to its poor plasticity and formability at room temperature.The formability of AZ31B magnesium alloy sheet can be improved by repeated unidirectional bending(RUB)process through control of(0002)basal texture.Compared with as-received sheet,the Erichsen value(IE)of the sheet underwent RUB process increases to 5.90 from 3.53 at room temperature.It is also confirmed that cell phone houses could be stamped successfully in crank press with AZ31B magnesium alloy sheets underwent RUB process.It provides an alternative to the electronics industry in the application of magnesium alloys.
文摘In this paper, we study the influence ofeco materials for roof insulation and fiber-reinforced mortar coatings on cooling loads of a home in dry tropical climate. The walls of the house are made of cinderblock or laterite and the insulating material of a roof panel is made with lime （24%）, cement （6%）, water （50%） of vegetable fibers hibiscus sabdariffa （16%）, tree widespread in Burkina Faso and sugar cane bagasse （4%）. This panel roof insulation and the fiber-reinforced mortar were characterized at the Laboratory of Physics and Chemistry of the environment by the hot plate method. The building is modeled in TRNSYS using climate data from the city of Ouagadougou. The results obtained show that in the warmer months of the year, that is to say in March and April, the relative differences between heat gains the configurations ＂breeze block-coating mortar and roof not insulated＂ and ＂laterite- fiber-reinforced mortar coating and insulated roof＇ vary between 15.6% and 16.8%. The configuration ＂laterite-fiber-reinforced mortar coating and insulated roof allows a reduction of annual heat gains of 15.5% compared to the configuration ＂breeze block-coating mortar and roof not insulated＂.
文摘According to the status of the northern rural architecture analysis, the prevalence of high energy consumption, low comfort features, it is essential to design energy-efficient buildings in rural areas. Article research and analyze the layout of rural buildings, a variety of energy-saving technologies and building design measures development and utilization of new energy sources and other issues that can make rural buildings to save energy and improve the environmental quality of living of farmers. It also put forward some reasonable suggestions for carrying out residential building energy efficiency in cold areas.
文摘During last decades the solar passive heating of buildings found rather wide application. It has been used effectively in an estimated 17,000 commercial buildings in the United States-ranging from offices to schools, and airport terminals. At present there exist two main types of solar houses, ＂house collector＂ and ＂wall collector＂. A part of researchers find that the use of＂house collector＂ is more simple and efficient. The other part is sure that ＂wall collector＂ is more convenient to use and it has higher efficiency. But our analysis show that in existing literature there is not any method for evaluating efficiency of solar houses. Moreover, there is not in. use a concept on solar houses efficiency. To us each type of solar houses has its own advantages and disadvantages. In this paper solar passive ＂House-Collector＂ heating modes of houses and their efficiency are discussed. For calculation of designing parameters of solar houses a simplified method is presented, taking into consideration both the heat gains and heat losses.
基金supported by the Fundamental and Cutting-Edge Research Plan of Chongqing(Grant Nos.cstc2017jcyj AX0114&cstc2016jcyj A0434)the National Natural Science Foundation of China(Grant Nos.51401040,51601075&51601165)
文摘In this work, commercially pure Zr sheets were subjected to β air cooling and then rolled to different reductions(10% and 50%)at room temperature. Microstructures of both the β-air-cooled and the rolled specimens were well characterized by electron channelling contrast imaging and electron backscatter diffraction techniques, with special attentions paid to their misorientation characteristics. Results show that the β-air-cooled specimen owns a Widmanst?tten structure featured by lamellar grains with typical phase transformation misorientations. The 10% rolling allows prismatic slip and tensile twinning({11-21}<11-2-6> and{10-12}<10-11>) to be activated profusely, which produce new low-angle(~3°–5°) and high-angle(~35° and ~85°) misorientation peaks, respectively. After increasing the rolling reduction to 50%, twinning is suppressed and dislocation slip becomes the dominant deformation mode, with the lamellar grains highly elongated and aligned towards the rolling direction.Meanwhile, only one strong low-angle misorientation peak related to the prismatic slip is presented in the 50%-rolled specimen,with all other peaks disappeared. Analyses on local misorientations reveal that hardly any residual strains exist in the β-air-cooled specimen, which should be related to their sufficient relaxation during slow cooling. Residual strains introduced by 10% rolling are heterogeneously distributed near grain/twin boundaries while heavier deformation(50% rolling) produces much larger residual strains pervasively existing throughout the specimen microstructure.
