Immobilization biological activated carbon used in advanced drinking water treatment

Bacteria separated from a mature filter bed of groundwater treatment plants were incubated in a culture media containing iron and manganese. A consortium of 5 strains of bacteria removing iron and manganese were obtained by repeated enrichment culturing. It was shown from the experiments of effect factors that ironmanganese removal bacteria in the euhure media containing both Fe and Mn grew better than in that containing only Fe, however, they were unable to grow in the culture media containing only Mn. When comparing the bacteria biomass in the case ofp （DO） ：2.8 mg/L andp （DO） ：9. 0 mg/L, no significant difference was found. The engineering bacteria removing the organic and the bacteria removing iron and manganese were simuhaneously inoculated into activated carbon reactor to treat the effluent of distribution network. The experimental results showed that by using IBAC （ Immobilization Biological Activated Carbon） treatment, the removal efficiency of iron, manganese and permanganate index was more than 98% , 96% and 55% , respectively. After the influent with turbidity of 1.5 NTU, color of 25 degree and oflbnsive odor was treated, the turbidity and color of effluence were less than 0.5 NTU and 15 degree, respectively, and it was odorless. It is determined that the cooperation function of engineering bacteria and activated carbon achieved advanced drinking water treatment.

Electromagnetic anti-fouling technology for prevention of scale

An electromagnetic anti-fouling technology(EAFT) was developed further. The operating principle of the EAFT was presented using fundamental physics laws. To validate the effect of EAFT and identify the mechanism, a circulating flow setup was built. A series of fouling tests were carried out with and without EAFT, measuring fouling thermal resistance as function of time, making scanning electron microscope images and analyzing the particles size distribution in solution by dynamics light scattering technology. The main results were as follows: 1) All the precipitated crystals in solution were calcite and there were little differences between with EAFT and without EAFT in the experimental range. 2) The number of precipitate nucleation in solution was small and the particle growth was slow without EAFT. In opposition to the case untreated, a rapid particle growth was observed and the number of nucleation was expected to be large, due to the fact that the EAFT effectively increases the ions and crystals collision frequency and effectiveness by utilizing the induced electric field. It is indicated that the particle growth is promoted mainly by coagulation process but not nucleation growth. 3) The EAFT could prolong the delay time of fouling greatly, and after the delay time, the thermal resistance quickly increased. Therefore, in order to mitigate scale significantly, the floccules in solution should be deposited beforehand in a low-lying area of the exchangers and let off in time.

Pulsed Corona Discharges and Their Applications in Toxic VOCs Abatement

Plasma processes are among the emerging technologies for volatile organic compounds (VOCs) abatement[1]. Both thermal plasmas and non-equilibrium plasmas (cold plasmas) are being developed for VOCs cleanup[2,3]. Particularly, pulsed corona discharges offer several advantages over conventional VOCs abatement techniques[4-7]. To optimize the existing technology and to develop it further, there is need to understand the mechanisms involved in plasma chemical reactions. Furthermore, it is strongly desirable to be able to predict the behavior of new VOCs in non-equilibrium plasma environment from the data known for a few representative compounds. Pulsed corona discharge technique is introduced here with citation of relevant literature. Fundamental principles, useful for predicting the VOCs' decomposition behavior, have been worked out from the published literature. Latest developments in the area, targeted to minimize the energy losses, improve the VOCs destruction efficiency and reduce the generation of unwanted organic and inorganic by-products, are presented.

Nitrate Removal from Drinking Water with Sodium Citrate as Sole Carbon Source

This paper investigates the effect of using sodium citrate（NaC6H5O6·2H2O）as sole carbon source for nitrate removal from drinking water.With sodium citrate as sole carbon source, batch experiments have been conducted to study the law of denitrification influenced by pH, C/N and temperature. Results show that a denitrification rate reaching 1.32 g NO-3-N /（g Biomass·d） was obtained when pH was at 7.5,C/N at 1.7（atom ratio）, and temperature from 20 ℃ to 30 ℃. The results also show that denitrification rate with sodium citrate as carbon source approaches to that with methanol as carbon source.

Nanosecond Pulse Treatment on Water and Water Solutions

The experiment results of the nanosecond electromagnetic pulses action on water and water solutions containing radionuclides are described. An activity decrease of radionuclides solution is observed in many experiments. The results may be useful to create water purification devices from heavy metals and radionuclides.

Solar Photochemical Pre-Treatment for Sulphurous Ground Water Purification Process

The sulfurous water deposit exploitation in volcanic, swamp, or wetland regions, represents an alternative option for potable water supply in cities and communities around the world. However, before its consumption, it must be treated by the application of physicochemical or biological methods with the ability to separate high contents in sulfates, hydrogen sulphite and sulphides which have laxative, allergic and toxic properties in humans. Conventional methods require the supply of chemical compounds or the adequate control of different parameters such as pH, temperature, etc., and the constant maintenance within their reactors. For these reasons, the systems could have elevated operating costs and require additional steps to enable the treatment of its separated products and the final disposal of its residual waste generated. In this research, compound parabolic collectors are implemented for the use of solar energy radiation, UV-B type, in Solar Advanced Oxidation Processes in H2O2/O3/UVsolar homogeneous phase. Its application during the pre-treatment of four sulfur water wells from the region of Puebla, Mexico, demonstrated its ability to transform their sulfur compounds in sulfates of easy removal by a later stage of reverse osmosis, in an approximately 15 min treatment time process.