This paper investigates the Medium Access Control(MAC)protocol performance in the IEEE 802.11g-over-fiber network for different payloads and fiber lengths using Direct Sequence Spread Spectrum-Orthogonal Frequency Div...This paper investigates the Medium Access Control(MAC)protocol performance in the IEEE 802.11g-over-fiber network for different payloads and fiber lengths using Direct Sequence Spread Spectrum-Orthogonal Frequency Division Multiplexing(DSSSOFDM)and Extended Rate PhysicalsOrthogonal Frequency Division Multiplexing(ERP-OFDM)physical layers using basic access mode,Request to Send/Clear to Send(RTS/CTS)and CTS-to-self mechanisms.The results show that IEEE 802.11g-over-fiber network employing the ERP-OFDM physical layer is much more efficient than that employing the DSSS-OFDM physical layer,with regards to both throughput and delay.For a given maximum throughput/minimum delay,the tradeoff among the access mechanism,the fiber length,and the payload size must be considered.Our quantified results give a selection basis for the operators to quickly select suitable IEEE 802.11g physical layers and the different access mechanisms,and accurately predict the data throughput and delay given the specific parameters.展开更多
A set of integrated Orthogonal Frequency Division Multiplexing(OFDM) modulation and demodulation system is proposed and its performance is verified in reference to the standard of IEEE802.16a for WMAN.The design,combi...A set of integrated Orthogonal Frequency Division Multiplexing(OFDM) modulation and demodulation system is proposed and its performance is verified in reference to the standard of IEEE802.16a for WMAN.The design,combined with analogy front-end,adopts Texas Instrument(TI) Company's 6701 evaluation module(EVM) to construct digital Intermediate Frequency(IF) platform.A DSP-based baseband processing software module is embedded into the system.The proposed scheme makes it possible for users to select various software modules to set up connections with different throughput performance.Taking into account the given hardware configuration,the design aims to optimize the algorithm modules to accomplish better system performance.展开更多
The objective of this paper is to study the issue of design efficiency for minimum projection uniformity designs. The results show that for orthogonal arrays with strength two, the minimum projection uniformity criter...The objective of this paper is to study the issue of design efficiency for minimum projection uniformity designs. The results show that for orthogonal arrays with strength two, the minimum projection uniformity criterion is a good surrogate for the design efficiency criterion proposed by Cheng, Deng and Tang （2002）.展开更多
The temperature field variation law and distribution characteristics of an orthotropic flat steel box girder under sunny conditions were analyzed through a field temperature test on the steel box girder of the operati...The temperature field variation law and distribution characteristics of an orthotropic flat steel box girder under sunny conditions were analyzed through a field temperature test on the steel box girder of the operational Runyang Yangtze River Bridge(the suspension bridge part).Function optimization fitting and error analysis of the test data were conducted.A temperature gradient distribution curve applicable to a hexagonal flat steel box girder was proposed.Based on the measurement results,the temperature effect of an orthotropic flat steel box girder was analyzed using finite element method and the effects of different temperature gradient modes on the mechanical characteristics and stress distribution of the steel box girder were compared.Under sunny conditions,heat conduction in the flat steel box girder structure shows distinct "box-room effect" characteristics,and the actual temperature gradient distribution is inconsistent with the one suggested by the existing standards.The thermal stress of a steel box girder calculated from the measured temperature gradient mode exceeds that calculated from the standard,and the intensity approximates that under the action of designed vehicle loads.The temperature-induced stress is distributed centrally near the manufacturing welds of the orthotropic steel box girder,which should be considered in design,construction and research.Results from this study could supplement the existing bridge and culvert design standards.展开更多
基金supported in part by the National Basic Research Program of China under Grant No. 2012CB315705 (973 program)National Natural Science Foundation of China under Grants No.61107058, No.61120106001, No.60932004, No.61001121, No.60837004+2 种基金National High-Tech Research and Development Program of China under Grant No.2011AA010306 (863 program)Beijing Excellent Doctoral Thesis Project under Grant No.YB20101001301Cooperation Project between Province and Ministries under Grant No.2011A090200025
文摘This paper investigates the Medium Access Control(MAC)protocol performance in the IEEE 802.11g-over-fiber network for different payloads and fiber lengths using Direct Sequence Spread Spectrum-Orthogonal Frequency Division Multiplexing(DSSSOFDM)and Extended Rate PhysicalsOrthogonal Frequency Division Multiplexing(ERP-OFDM)physical layers using basic access mode,Request to Send/Clear to Send(RTS/CTS)and CTS-to-self mechanisms.The results show that IEEE 802.11g-over-fiber network employing the ERP-OFDM physical layer is much more efficient than that employing the DSSS-OFDM physical layer,with regards to both throughput and delay.For a given maximum throughput/minimum delay,the tradeoff among the access mechanism,the fiber length,and the payload size must be considered.Our quantified results give a selection basis for the operators to quickly select suitable IEEE 802.11g physical layers and the different access mechanisms,and accurately predict the data throughput and delay given the specific parameters.
文摘A set of integrated Orthogonal Frequency Division Multiplexing(OFDM) modulation and demodulation system is proposed and its performance is verified in reference to the standard of IEEE802.16a for WMAN.The design,combined with analogy front-end,adopts Texas Instrument(TI) Company's 6701 evaluation module(EVM) to construct digital Intermediate Frequency(IF) platform.A DSP-based baseband processing software module is embedded into the system.The proposed scheme makes it possible for users to select various software modules to set up connections with different throughput performance.Taking into account the given hardware configuration,the design aims to optimize the algorithm modules to accomplish better system performance.
基金supported bythe National Natural Science Foundation of China under Grant No.10671080NCET under Grant No.06-672+1 种基金SRFDP under Grant No.20090144110002the Innovation Program Funded by Central China Normal University
文摘The objective of this paper is to study the issue of design efficiency for minimum projection uniformity designs. The results show that for orthogonal arrays with strength two, the minimum projection uniformity criterion is a good surrogate for the design efficiency criterion proposed by Cheng, Deng and Tang （2002）.
基金supported by the Engineering Section of the Jiangsu Runyang Bridge Development Co.,Ltdthe National Science & Technology Support Program of China (Grant No. 2009BAG15B03)the National Science Foundation of China (Grant No. 51078080)
文摘The temperature field variation law and distribution characteristics of an orthotropic flat steel box girder under sunny conditions were analyzed through a field temperature test on the steel box girder of the operational Runyang Yangtze River Bridge(the suspension bridge part).Function optimization fitting and error analysis of the test data were conducted.A temperature gradient distribution curve applicable to a hexagonal flat steel box girder was proposed.Based on the measurement results,the temperature effect of an orthotropic flat steel box girder was analyzed using finite element method and the effects of different temperature gradient modes on the mechanical characteristics and stress distribution of the steel box girder were compared.Under sunny conditions,heat conduction in the flat steel box girder structure shows distinct "box-room effect" characteristics,and the actual temperature gradient distribution is inconsistent with the one suggested by the existing standards.The thermal stress of a steel box girder calculated from the measured temperature gradient mode exceeds that calculated from the standard,and the intensity approximates that under the action of designed vehicle loads.The temperature-induced stress is distributed centrally near the manufacturing welds of the orthotropic steel box girder,which should be considered in design,construction and research.Results from this study could supplement the existing bridge and culvert design standards.
