期刊文献+
共找到9篇文章
< 1 >
每页显示 20 50 100
华北陆块岩石圈减薄作用:热薄化与机械拉伸的数值模拟研究 被引量:27
1
作者 林舸 Y.H.Zhang +3 位作者 王岳军 郭锋 范蔚茗 阎义 《大地构造与成矿学》 EI CAS CSCD 北大核心 2004年第1期8-14,共7页
针对华北陆块岩石圈减薄作用的动力学机制开展了一系列二维定量数值模拟研究。其模拟结果表明,在给定的岩石圈热传导和放射性生热条件下,岩石圈底部地幔热流(mantlethermalflux)的增加能导致岩石圈内热状态的明显改变,导致早古生代以来... 针对华北陆块岩石圈减薄作用的动力学机制开展了一系列二维定量数值模拟研究。其模拟结果表明,在给定的岩石圈热传导和放射性生热条件下,岩石圈底部地幔热流(mantlethermalflux)的增加能导致岩石圈内热状态的明显改变,导致早古生代以来华北岩石圈厚度的巨大变化,当地幔热流达到35~40mWm-2,华北陆块的岩石圈厚度将减薄至100km以内。单纯的机械拉张同样能导致岩石圈厚度的薄化,但岩石圈厚度的减薄相对有限。即使拉张伸展率达25%,其岩石圈厚度最大减薄至150km。因此通过数值模拟的研究揭示了这样的事实,即华北陆块岩石圈厚度的减薄主要受制于岩石圈内热状态的变化,以热侵蚀的减薄方式为主,机械拉张作用可能对华北陆块岩石圈厚度的减薄作用有一定贡献。 展开更多
关键词 岩石圈热 机械拉 数值模拟 地幔热流 华北陆块
下载PDF
芳砜纶混纺织物浆料配方优化 被引量:1
2
作者 李向红 张军英 《棉纺织技术》 CAS 北大核心 2013年第11期5-8,共4页
优选芳砜纶芳纶1313混纺织物浆料配方。首先通过单因子试验,测试了PVA205、LX-6、JX-1、JX-2、CD-PT浆料浆出纱线的增强率、减伸率、毛羽降低率和耐磨提高率,以优选出的浆料配制不同混比的配方对不同混纺比的芳砜纶芳纶1313混纺纱进行... 优选芳砜纶芳纶1313混纺织物浆料配方。首先通过单因子试验,测试了PVA205、LX-6、JX-1、JX-2、CD-PT浆料浆出纱线的增强率、减伸率、毛羽降低率和耐磨提高率,以优选出的浆料配制不同混比的配方对不同混纺比的芳砜纶芳纶1313混纺纱进行浆纱试验。研究结果表明:浆料配方对浆纱减伸率和毛羽降低率影响显著,而对浆纱增强率和耐磨提高率的影响并不明显,混纺比只对浆纱耐磨提高效果影响较大。认为应根据纱线使用要求和原料组成,合理选择浆料配方。 展开更多
关键词 芳砜纶 混纺比 浆料 增强率 减伸 毛羽降低率 耐磨提高率 方差分析
下载PDF
精纺毛单纱上浆工艺研究 被引量:1
3
作者 张秋菊 张鹏飞 《山东纺织科技》 2015年第6期12-14,共3页
文章通过测试18tex精纺毛单纱上浆前后纱线的增强率、减伸率、毛羽率、耐磨性等性能,以期得到与进口浆料上浆效果接近的配比方案。结果表明:PVA∶接枝淀粉∶聚丙烯(酰胺)为40∶40∶20,辅以1%抗静电剂,含固量18%,上浆温度75℃,可以达到... 文章通过测试18tex精纺毛单纱上浆前后纱线的增强率、减伸率、毛羽率、耐磨性等性能,以期得到与进口浆料上浆效果接近的配比方案。结果表明:PVA∶接枝淀粉∶聚丙烯(酰胺)为40∶40∶20,辅以1%抗静电剂,含固量18%,上浆温度75℃,可以达到相近效果。 展开更多
关键词 精纺毛 上浆 毛羽 增强率 减伸 耐磨
下载PDF
树胶替代PVA的绢丝单纱浆料配置研究
4
作者 王亦秋 苑婧 眭建华 《现代丝绸科学与技术》 2017年第1期9-10,共2页
为探索含树胶的绢丝单纱用浆料,采用1/166.7dtex绢纱,选用骨胶为主浆料,树胶、变性淀粉、PVA为辅料,配置主浆料加一种辅料和主浆料加两种辅料共五种浆料,单纱浆纱,测试计算纱线增强率和减伸率。结果表明:含树胶的骨胶浆料在增强和减伸... 为探索含树胶的绢丝单纱用浆料,采用1/166.7dtex绢纱,选用骨胶为主浆料,树胶、变性淀粉、PVA为辅料,配置主浆料加一种辅料和主浆料加两种辅料共五种浆料,单纱浆纱,测试计算纱线增强率和减伸率。结果表明:含树胶的骨胶浆料在增强和减伸效果上可以替代PVA;试验的浆料最优配置为骨胶60%、变性淀粉20%、树胶20%,含固量7%。 展开更多
关键词 骨胶 树胶 变性淀粉 PVA 增强率 减伸
下载PDF
磁性丙纶上浆性能初探
5
作者 郭晨露 《中国纤检》 2012年第15期78-80,共3页
采用部分醇解PVA、聚丙烯酸酯类化学浆料的混合浆对磁性丙纶进行上浆,并研究不同配比的混合浆对磁性丙纶上浆性能的影响。结果表明,当选择PVA90%、聚丙烯酸酯10%、含固率为8%的配比时,磁性丙纶的增强率、增磨率及减伸率为最优。
关键词 磁性丙纶 上浆性能 增强率 增磨率 减伸
下载PDF
ZY-Ⅱ型环保浆料的试验报告
6
作者 肖琴 《新疆纺织》 2005年第4期1-1,14,共2页
通过对ZY-Ⅱ型环保浆料试验的综合分析,说明该浆料可以降低浆纱成本,降低织造经纱断头数。
关键词 ZY-Ⅱ型环保浆料 增强 减伸
下载PDF
Petrogenesis of Early Cretaceous adakitic granodiorite: Implication for a crust thickening event within the Cathaysia Block, South China 被引量:1
7
作者 SUN LiQiang LING HongFei +5 位作者 ZHAO KuiDong CHEN PeiRong CHEN WeiFeng SUN Tao SHEN WeiZhou HUANG GuoLong 《Science China Earth Sciences》 SCIE EI CAS CSCD 2017年第7期1237-1255,共19页
Adakitic rocks in continental settings are commonly considered to be formed by partial melting of thickened or delaminated lower crust. Investigations on this kind of rocks can provide important information about crus... Adakitic rocks in continental settings are commonly considered to be formed by partial melting of thickened or delaminated lower crust. Investigations on this kind of rocks can provide important information about crustal evolution complementary to information from other rocks. This paper reports adakitic granodiorite of the Lingxi pluton in the interior of the Cathayisa Block. LA-ICP-MS zircon U-Pb dating shows that it was formed in the late Early Cretaceous(100±1 Ma). The granodiorite has geochemical features of adakitic rocks derived from partial melting of the thickened lower crust, e.g., high SiO2(mainly ranging from 64.4 to 68.9 wt.%) and Sr(624–894 ppm) contents, Sr/Y(49.9–60.8) and La/Yb(23.4–42.8) values, low Y(10.3–17.1 ppm), Ni(5.62–11.8 ppm) and MgO(mostly from 0.86 wt.% to 1.57 wt.%) contents and weak Eu anomaly. It has initial 87Sr/86 Sr ratios of 0.7086–0.7091, εNd(t) values of.6.2 to.5.9 and zircon εHf(t) values mostly of.10.1 to.7.6. Based on the geochemical characteristics and simple modelling, it is suggested that the most likely generation mechanism of the Lingxi granodiorite is partial melting of a thickened Proterozoic lower continental crust at a pressure ≥12 kbar(or crust thickness ≥40km), leaving a garnet-bearing amphibolite residue. Combining our results and previous studies of the tectonic evolution of the Cathaysia Block, we propose that the crust was thickened to over 40 km by a compressive event occurring during the late Early Cretaceous, which is supported by the observation that there is an angular unconformity between the Upper Cretaceous Series and the early Lower Cretaceous or the Jurassic rocks. After this event, the Cathaysia Block experienced a lithospheric extension and thinning probably driven by the high-angle paleo-Pacific subduction. With the attenuation of lithosphere, the lower crust was heated to partial melting by upwelling asthenospheric materials, resulting in generation of the Lingxi granodiorite and other coeval granitoids in the Cathaysia Block. This study provides new information on the crustal evolution of the Cathaysia Block during the Early Cretaceous. 展开更多
关键词 Sr-Nd-Hf isotopes Adakitic rock Thickened crest Early Cretaceous South China
原文传递
Melilite-derived mineral inclusions in chromite from the Gaositai complex: Implications for an extensional tectonic setting in Early Permian at the north North China Craton 被引量:1
8
作者 SHAO Ji An TIAN Wei +1 位作者 WEI Chun Jing ZHU Wen Ping 《Science China Earth Sciences》 SCIE EI CAS CSCD 2016年第3期583-589,共7页
The Early Permian mafic-ultramafic concentrically zoned Gaositai intrusion at Chengde, on the northern margin of the North China Craton(NCC), is a cumulative complex emplaced along a giant fracture that penetrates dee... The Early Permian mafic-ultramafic concentrically zoned Gaositai intrusion at Chengde, on the northern margin of the North China Craton(NCC), is a cumulative complex emplaced along a giant fracture that penetrates deeply into the continental lithosphere. Melt inclusions are present in chromite crystals from the inner dunite and chromitite zones of the Gaositai complex. The melt inclusions have experienced post-trap crystallization and resulted in multiple mineral phases, including melilite, garnet, phlogopite, magnesite and apatite, which can indicate the liquidus minerals of the primitive magma. The characteristics of the melilite+melanite+clinopyxene assemblage indicate that the primary parental magma was highly undersaturated and derived from an alkali-rich mantle source. The crystallization of phlogopite, magnesite and apatite suggests a primary magma rich in K, H_2O and CO_2. When compared with experimental data, the primary magma of the Gaositai intrusion is concordant with a kamafugite magma originating from partial melting of enriched mantle with H_2O and CO_2 at pressures greater than 2.7 GPa. This magmatic process would have been related to extensional thinning of the continental lithosphere. The Gaositai primary magmas have high Nb/La ratios, which are similar to those of ocean island basalts, but different from arc-related magmas. This suggests that the northern margin of the NCC was not an active continental margin of the Paleo-Asian Ocean subduction zone during the Early Permian: an extensional tectonic setting during the emplacement of the Gaositai intrusion is more likely. 展开更多
关键词 Melt Inclusion Melilite Primary melt Extension Continental lithosphere North China Craton
原文传递
一种嵌胶复合金属衬塑管
9
作者 李若湘 《现代橡塑》 2004年第12期42-42,共1页
本实用新型涉及复合管材,特别是一种在金属管内衬有塑料管,并在金属管与塑料管之间嵌胶的复合管道材料。其特征在于:固化后的胶层以凸突的方式镶嵌在内层塑料管外壁沟槽里,以此阻止金属外管与塑料内管的相互位移。本实用新型可采用... 本实用新型涉及复合管材,特别是一种在金属管内衬有塑料管,并在金属管与塑料管之间嵌胶的复合管道材料。其特征在于:固化后的胶层以凸突的方式镶嵌在内层塑料管外壁沟槽里,以此阻止金属外管与塑料内管的相互位移。本实用新型可采用减径拉伸法制造。 展开更多
关键词 嵌胶复合金属衬塑管 塑料管 金属管 径拉
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部