Influences of admixtures on the workability and strength of high performance concrete （HPC） are in- vestigated. The types of investigated admixtures include naphthalene series high range water reducing agent, polyca...Influences of admixtures on the workability and strength of high performance concrete （HPC） are in- vestigated. The types of investigated admixtures include naphthalene series high range water reducing agent, polycarboxlic series high range water reduce agent and sodium sulfate hardening accelerating agent. Two kinds of curing condition, namely steam curing condition and standard curing condition, are adopted. The result shows that HPC, added with polycarboxlic series of high performance water reducer, has high workability and strength, while sodium sulfate accelerating agent causes poor workability and low strength. Thus for vapor-cured HPC and its formulations, naphthalene series high range water reducing agent with less sodium sulfate should be given pri- ority. Therefore, the differences of curing conditions should be considered when selecting HPC admixtures.展开更多
The high-flowing sand-concrete （HFSC） containing natural sands as aggregate was carried out. The high fluidity and stability of HFSC can be achieved by tailoring the mix design parameters, such as fine to coarse san...The high-flowing sand-concrete （HFSC） containing natural sands as aggregate was carried out. The high fluidity and stability of HFSC can be achieved by tailoring the mix design parameters, such as fine to coarse sand ratio, dosage of additions, water to binder ratio and dosage of admixtures. Mini-cone slump test, v-fl.mnel time test and viscosity model parameters were used to characterize the behaviour of HFSC in fresh state. The mechanical compressive strength in 28 d was also determined. A factorial design approach was used to establish models highlighting the effect of each mix-parameter on measured properties of HFSC. The derived models are valid for mixtures made with 0 to 0.3 of dune sand to total sand ratio, 82 to 418 kg/m3 of marble powder, 0.42 to 0.46 of water/binder ratio and 1.3% to 1.9% of superplasticizer high water-reducer. The results show that the derived models constitute very efficient means for understanding the influence of key mix-parameters on HFSC properties and are useful in selecting the optimum mix proportions, by simulating their impact on fluidity, stability and compressive strength.展开更多
The objective of this research is to study the effect of grinding powdered superplasticizer, Portland cement, sand, and silica fume on the properties of fresh and hardened concrete. Lose Angeles Machine was used to gr...The objective of this research is to study the effect of grinding powdered superplasticizer, Portland cement, sand, and silica fume on the properties of fresh and hardened concrete. Lose Angeles Machine was used to grind these constituents. The program was arranged to determine the effect of cycles＇ number, superplasticizer type and dosage, silica fume dosage and condition, and gravel to sand ratio on properties of concrete. Naphthalene sulphonated formaldehyde （NSF） superplasticizers in the forms of liquid and powdered were used. Silica fume may be grinded with the other constituents （grinded）, or added to concrete mixer （normal）. The water/cement （w/c） ratio varied from 0.35 to 0.55 to achieve a constant slump （50-90 mm）. Slumps, bulk density and mechanical properties of concrete were measured. Scanning electron microscope （SEM） was also used to show the differences between traditional and superplasticized concrete. The results showed that grinding the mixture enhances fresh and hardened concrete properties. It is also observed that grinding the mixture for 500 cycles is more effective than other numbers of grinding. In addition, superplasticized concrete exhibits compressive strength higher than traditional one at varied ages. Moreover, using powdered superplasticizer has a remarkable effect on enhancing concrete properties rather than using it in a liquid form. A dosage of 1% by weight of cement gave the highest results of compressive strength. Silica fume has an essential role in improving concrete strength and durability since it acts as very efficient void filler and as a super pozzolana. SEM observations illustrate that grinding the mixture enhances transition zone （TZ） properties and makes it denser. On the other hand, grinded mixture can be packaged in bags and transported for use in crowded cities, and so, enhances quality control, since the only requirement to obtain superplasticized concrete is to add water and gravel. This technique has many benefits such as; saving cement, labor and noise, high quality control, and enhancing concrete permeability and durability. There are many fields of application of superplasticized concrete such as; in locations which are not easily accessible by ordinary concreting techniques, in repairing and strengthen, thin coating, and for small projects when ready mix supply is not feasible.展开更多
基金Supported by the National Basic Research Programe of China("973"Program)(2009CB623203)the Construction Department of Zhejiang Province Foundation(1006)+1 种基金the Education Department of Zhejiang Province Foundation(Y200909029)the Doctoral Innovation Foundation of Nanjing University of Aeronautics andAstronautics(BCXJ07-04)~~
文摘Influences of admixtures on the workability and strength of high performance concrete （HPC） are in- vestigated. The types of investigated admixtures include naphthalene series high range water reducing agent, polycarboxlic series high range water reduce agent and sodium sulfate hardening accelerating agent. Two kinds of curing condition, namely steam curing condition and standard curing condition, are adopted. The result shows that HPC, added with polycarboxlic series of high performance water reducer, has high workability and strength, while sodium sulfate accelerating agent causes poor workability and low strength. Thus for vapor-cured HPC and its formulations, naphthalene series high range water reducing agent with less sodium sulfate should be given pri- ority. Therefore, the differences of curing conditions should be considered when selecting HPC admixtures.
文摘The high-flowing sand-concrete （HFSC） containing natural sands as aggregate was carried out. The high fluidity and stability of HFSC can be achieved by tailoring the mix design parameters, such as fine to coarse sand ratio, dosage of additions, water to binder ratio and dosage of admixtures. Mini-cone slump test, v-fl.mnel time test and viscosity model parameters were used to characterize the behaviour of HFSC in fresh state. The mechanical compressive strength in 28 d was also determined. A factorial design approach was used to establish models highlighting the effect of each mix-parameter on measured properties of HFSC. The derived models are valid for mixtures made with 0 to 0.3 of dune sand to total sand ratio, 82 to 418 kg/m3 of marble powder, 0.42 to 0.46 of water/binder ratio and 1.3% to 1.9% of superplasticizer high water-reducer. The results show that the derived models constitute very efficient means for understanding the influence of key mix-parameters on HFSC properties and are useful in selecting the optimum mix proportions, by simulating their impact on fluidity, stability and compressive strength.
文摘The objective of this research is to study the effect of grinding powdered superplasticizer, Portland cement, sand, and silica fume on the properties of fresh and hardened concrete. Lose Angeles Machine was used to grind these constituents. The program was arranged to determine the effect of cycles＇ number, superplasticizer type and dosage, silica fume dosage and condition, and gravel to sand ratio on properties of concrete. Naphthalene sulphonated formaldehyde （NSF） superplasticizers in the forms of liquid and powdered were used. Silica fume may be grinded with the other constituents （grinded）, or added to concrete mixer （normal）. The water/cement （w/c） ratio varied from 0.35 to 0.55 to achieve a constant slump （50-90 mm）. Slumps, bulk density and mechanical properties of concrete were measured. Scanning electron microscope （SEM） was also used to show the differences between traditional and superplasticized concrete. The results showed that grinding the mixture enhances fresh and hardened concrete properties. It is also observed that grinding the mixture for 500 cycles is more effective than other numbers of grinding. In addition, superplasticized concrete exhibits compressive strength higher than traditional one at varied ages. Moreover, using powdered superplasticizer has a remarkable effect on enhancing concrete properties rather than using it in a liquid form. A dosage of 1% by weight of cement gave the highest results of compressive strength. Silica fume has an essential role in improving concrete strength and durability since it acts as very efficient void filler and as a super pozzolana. SEM observations illustrate that grinding the mixture enhances transition zone （TZ） properties and makes it denser. On the other hand, grinded mixture can be packaged in bags and transported for use in crowded cities, and so, enhances quality control, since the only requirement to obtain superplasticized concrete is to add water and gravel. This technique has many benefits such as; saving cement, labor and noise, high quality control, and enhancing concrete permeability and durability. There are many fields of application of superplasticized concrete such as; in locations which are not easily accessible by ordinary concreting techniques, in repairing and strengthen, thin coating, and for small projects when ready mix supply is not feasible.
