期刊文献+
共找到10篇文章
< 1 >
每页显示 20 50 100
浅圆仓附壁折板淌槽减碎效果的分析 被引量:1
1
作者 王永昌 《粮食与食品工业》 2003年第2期47-48,共2页
通过理论分析 ,找出附壁折板淌槽减碎方法的合理参数 。
关键词 浅圆仓 附壁折板淌槽 减碎方法 粮食储备库 玉米破 减碎效果
下载PDF
碾米机减碎降耗技术分析 被引量:3
2
作者 杨会宾 张朝富 +2 位作者 李志方 程科 季坤 《粮食与饲料工业》 CAS 2017年第8期4-7,共4页
我国每年有近2亿t的稻谷被加工成食用大米,碾米机作为稻谷加工的关键设备,在保证成品大米质量、提高粮食利用率、节能降耗等方面起着至关重要的作用。从工艺设计、设备选型、施工以及操作管理等几个方面对碾米机减碎降耗技术进行了研究... 我国每年有近2亿t的稻谷被加工成食用大米,碾米机作为稻谷加工的关键设备,在保证成品大米质量、提高粮食利用率、节能降耗等方面起着至关重要的作用。从工艺设计、设备选型、施工以及操作管理等几个方面对碾米机减碎降耗技术进行了研究分析,并提出相关措施以供参考。 展开更多
关键词 碾米机 减碎 节粮节能
下载PDF
设备改造对玉米烘干和入仓减碎的重要性 被引量:2
3
作者 毕文广 赵敏 吕国军 《粮油仓储科技通讯》 2012年第2期38-40,共3页
围绕玉米破碎问题,对粮食烘干、入仓设备改造进行大胆尝试,有效减少粮食产后损失,增加了经济效益,保障了储粮安全。
关键词 设备改造 玉米烘干 减碎 浅圆仓
下载PDF
砖圆仓储粮产生破碎原因及减碎方法探讨
4
作者 苑昕 《粮食加工》 2013年第5期72-72,75,共2页
常用的砖圆仓储粮在粮食脱粒过程、运输设备过程、烘干工艺参数选择、入仓环节均会产生储粮破碎问题。在脱粒、输送、烘干、入仓环节进行控制和管理,能够有效地处理好破碎问题。
关键词 砖圆仓 原因 减碎方法
下载PDF
降低稻谷产后破碎率的实践与探讨
5
作者 徐金勇 《粮食加工》 2024年第4期14-17,共4页
稻谷产后的烘干、加工过程的不当处理,直接会带来碎米率增加,通过试验分析稻谷在烘干和加工环节可能会造成粮食破碎的因素,并提出减碎方法与措施。
关键词 因素 减碎措施
下载PDF
减少稻米爆腰与破碎 提高稻谷出米率 被引量:4
6
作者 李维强 《粮食加工》 2014年第3期33-36,共4页
造成稻米爆腰和破碎原因有很多,除稻谷本身品质外,与收储及加工过程的诸多因素相关。通过对比试验研究稻谷烘干和加工环节造成稻米裂纹的因素,分析产生破碎机理并提出对策,减少稻米破碎问题。
关键词 稻米破 原因 减碎方法
下载PDF
碎骨减张法切除鼻中隔偏曲32例分析
7
作者 赵恒静 《华夏医学》 1999年第4期101-102,共2页
鼻中隔偏曲的手术治疗常易并发鼻中隔粘膜的损伤、穿孔。为避免手术并发症,降低手术难度和提高手术的安全性,笔者以碎骨减张法治疗鼻中隔偏曲32例,大部分手术顺利,操作较直观、安全,现报道如下。1材料与方法1.1病例选择随机... 鼻中隔偏曲的手术治疗常易并发鼻中隔粘膜的损伤、穿孔。为避免手术并发症,降低手术难度和提高手术的安全性,笔者以碎骨减张法治疗鼻中隔偏曲32例,大部分手术顺利,操作较直观、安全,现报道如下。1材料与方法1.1病例选择随机选择鼻中隔偏曲患者32例作为治疗组... 展开更多
关键词 鼻中隔 切除术
下载PDF
变频调速技术在粮食干燥系统中的应用 被引量:1
8
作者 邸坤 李杰 陈诗学 《粮食流通技术》 2010年第6期21-24,共4页
分析了风机的风量Q、风压H、轴功率P与转速n之间的关系,阐述了变频调速技术的节能原理、节能效果和特点,介绍了变频调速技术在我国粮食干燥系统中的应用现状,并提出了变频调速技术在我国粮食行业应用的合理化建议。通过变频调速技术在... 分析了风机的风量Q、风压H、轴功率P与转速n之间的关系,阐述了变频调速技术的节能原理、节能效果和特点,介绍了变频调速技术在我国粮食干燥系统中的应用现状,并提出了变频调速技术在我国粮食行业应用的合理化建议。通过变频调速技术在粮食干燥系统中的应用,证实了变频调速技术在节能降耗、粮食减碎、提高自动化水平等方面具有显著优势,应用前景广阔。 展开更多
关键词 粮食干燥 变频调速 节能 减碎 风机 提升机
下载PDF
The test research on partial relieving pressure for the entry in the deep mine under high stress and friable surrounding rock
9
作者 杜计平 候朝炯 +1 位作者 朱亚平 郝明奎 《Journal of Coal Science & Engineering(China)》 2007年第3期359-361,共3页
Based on the geological condition of Zhangxiaolou deep mine in Xuzhou mining area, under 986 m in depth, 20.6-31.6 MPa in maximum horizontal principal stress, and friable and fractured surrounding rock, test researche... Based on the geological condition of Zhangxiaolou deep mine in Xuzhou mining area, under 986 m in depth, 20.6-31.6 MPa in maximum horizontal principal stress, and friable and fractured surrounding rock, test researches on partial relieving pressure were completed for the entry with U-steel arched yielding support. The relieving pressure parameters, technology process and results of springing blasting by boreholes and excavating pockets in the two sides of entry were introduced. It is demonstrated that springing will not be shaped under the condition of single borehole arrangement after exploded, the arrangement by a group, it will make borehole bottom form springing in 0.6-0.8 m in diameter, that convergence of two sides and roof to floor have some increments by using springing blasting for reliving pressure. This kind of method for reliving pressure is not suitable to use in the deep mine, and that the convergence of two sides obviously declined by excavating pocket in two sides, it can be still used in the entry with metal support, while maintenance of entry in deep mines is difficult, and can not be supported by bolt or bolt with wire mesh. 展开更多
关键词 deep mine high stress friable and fractured surrounding rock ENTRY springing blasting relieving pressure excavating pocket relieving pressure
下载PDF
Wavelength-dependent Photodissociation Dynamics of Benzaldehyde
10
作者 Ben-kang Liu Bing-xing Wang +1 位作者 Yan-qiu Wang Li Wang 《Chinese Journal of Chemical Physics》 SCIE CAS CSCD 2009年第6期587-591,J0001,共6页
The ultrafast dynamics of benzaldehyde upon 260, 271, 284, and 287 nm excitations have been studied by femtosecond pinup-probe time-of-flight mass spectrometry. A bi-exponential decay component model was applied to fi... The ultrafast dynamics of benzaldehyde upon 260, 271, 284, and 287 nm excitations have been studied by femtosecond pinup-probe time-of-flight mass spectrometry. A bi-exponential decay component model was applied to fit the transient profiles of benzaldehyde ions and fragment ions. At the S2 origin, the first decay of the component was attributed to the internal conversion to the high vibrational levels of S1 state. Lifetimes of the first component decreased with increasing vibrational energy, due to the influence of high density of the vibrational levels. The second decay was assigned to the vibrational relaxation of the S1 whose lifetime was about 600 fs. Upon 287 nm excitation, the first decay became ultra-short (-56 fs) which was taken for the intersystem cross from S1 to T2, while the second decay component was attributed to the vibrational relaxation. The pump-probe transient of fragment was also studied with the different probe intensity at 284 nm pump. 展开更多
关键词 BENZALDEHYDE Ultrafast process Femtosecond pump-probe
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部