期刊文献+
共找到50篇文章
< 1 2 3 >
每页显示 20 50 100
高效凝水剂的合成及其吸湿溶胀机理分析 被引量:1
1
作者 李玉科 孙文艳 +2 位作者 吕绪良 崔传安 王宏宾 《解放军理工大学学报(自然科学版)》 EI 2007年第1期63-67,共5页
为了制备新型高效凝水剂并对其吸湿溶胀机理进行研究,以丙烯酸、丙烯酰胺为单体合成了交联型高效凝水剂,采用红外光谱和扫描电镜等对制备的样品进行了结构表征,并对其吸湿凝水性能进行了测试。证明合成的高效凝水剂具有交联的立体网状... 为了制备新型高效凝水剂并对其吸湿溶胀机理进行研究,以丙烯酸、丙烯酰胺为单体合成了交联型高效凝水剂,采用红外光谱和扫描电镜等对制备的样品进行了结构表征,并对其吸湿凝水性能进行了测试。证明合成的高效凝水剂具有交联的立体网状结构。结果表明,高效凝水剂表面有大量微孔,且内部不同尺寸的微孔互相贯通。分析了高效凝水剂源自表面吸附势、水分子扩散压和溶胀原理的吸湿溶胀机理,初步揭示了高效凝水剂的微观结构与其吸湿凝水性能的直接关系。 展开更多
关键词 凝水剂 丙烯酸 丙烯酰胺 吸湿 溶胀机理
下载PDF
应用于高温高盐油田的凝胶类堵水剂 被引量:11
2
作者 李良雄 王平美 +2 位作者 韩明 常泽亮 吴兴国 《油气采收率技术》 CSCD 1998年第2期75-79,共5页
该文介绍了各种凝胶类堵水剂的组成,并针对高温高盐油田,研究了各种耐温抗盐凝胶体系在油田堵水中的应用,确定了各种凝胶体系的适用范围。当地层温度在80℃~100℃时,可选用生物聚合物和改性聚丙烯酰胺凝胶体系;地层温度在1... 该文介绍了各种凝胶类堵水剂的组成,并针对高温高盐油田,研究了各种耐温抗盐凝胶体系在油田堵水中的应用,确定了各种凝胶体系的适用范围。当地层温度在80℃~100℃时,可选用生物聚合物和改性聚丙烯酰胺凝胶体系;地层温度在100℃~150℃时,常选用聚丙烯腈、木质素磺酸盐凝胶体系;地层温度大于150℃时,可选用聚乙烯胺和聚乙烯醇凝胶体系。对于有机交联体系,分子链中含有-NH2、-CONH2、-SH和-OH等基团,可用酚醛树脂和蜜胺树脂交联改性以提高其耐温、抗盐性能。研究表明凝胶类堵水剂对于高温高盐油田堵水有较好的应用前景。 展开更多
关键词 胶堵水剂 高温高盐油田 堵水
下载PDF
有机硅凝胶防水剂在混凝土结构维护中的应用 被引量:3
3
作者 郭平功 朱桂红 +1 位作者 张鹏 赵铁军 《新型建筑材料》 北大核心 2007年第7期34-37,共4页
混凝土结构中存在的裂缝为侵蚀性离子如氯离子进入混凝土的便捷通道,对混凝土进行表面防水处理,则可有效提高结构的耐久性。实验研究了在不同的裂缝宽度、不同的防水处理时机下,用有机硅凝胶防水剂进行防水处理的效果。结果表明,在0.1~... 混凝土结构中存在的裂缝为侵蚀性离子如氯离子进入混凝土的便捷通道,对混凝土进行表面防水处理,则可有效提高结构的耐久性。实验研究了在不同的裂缝宽度、不同的防水处理时机下,用有机硅凝胶防水剂进行防水处理的效果。结果表明,在0.1~0.4mm的裂缝宽度范围内,不管防水处理是在裂缝出现之前还是之后进行,与不进行防水处理相比,沿裂缝的氯离子含量都有大幅度的下降。 展开更多
关键词 裂缝 有机硅胶防水剂 防水处理 氯离子含量
下载PDF
抗温抗盐凝胶堵水剂的研制及评价 被引量:3
4
作者 武世新 杨珠普 陈思 《合成材料老化与应用》 2019年第2期92-94,99,共4页
以丙烯酸(AA)、丙烯酰胺(AM)、2-丙烯酰胺基-2-甲基丙磺酸钠(SAMPS)为原料,过硫酸铵为引发剂,通过水溶液聚合制备了凝胶堵水剂。利用单因素试验考察了单体用量、单体配比、引发剂用量、聚合温度等对堵水效果的影响,确定了最佳制备条件:... 以丙烯酸(AA)、丙烯酰胺(AM)、2-丙烯酰胺基-2-甲基丙磺酸钠(SAMPS)为原料,过硫酸铵为引发剂,通过水溶液聚合制备了凝胶堵水剂。利用单因素试验考察了单体用量、单体配比、引发剂用量、聚合温度等对堵水效果的影响,确定了最佳制备条件:单体用量15%,单体配比为n_(AM)∶n_(SAMPS)∶n_(AA)=2∶1∶1,引发剂用量为1.7%,聚合反应温度为50℃。该凝胶堵水剂抗温抗盐性能良好。 展开更多
关键词 胶堵水剂 水溶液聚合 单因素试验 吸水膨胀率
下载PDF
凝胶堵水剂的制备及性能评价 被引量:2
5
作者 武世新 《合成材料老化与应用》 2018年第5期93-95,共3页
以丙烯酸(AA)、丙烯酰胺(AM)、烯丙基磺酸类单体为原料,过硫酸钠为引发剂,通过水溶液聚合制备了凝胶堵水剂。利用正交试验确定了最佳合成条件,即:引发剂加量为1. 4%,单体物质的量之比为2∶3∶1,单体用量为15%,反应温度为60℃。并评价了... 以丙烯酸(AA)、丙烯酰胺(AM)、烯丙基磺酸类单体为原料,过硫酸钠为引发剂,通过水溶液聚合制备了凝胶堵水剂。利用正交试验确定了最佳合成条件,即:引发剂加量为1. 4%,单体物质的量之比为2∶3∶1,单体用量为15%,反应温度为60℃。并评价了堵水剂的抗温抗盐性能。 展开更多
关键词 烯丙基磺酸类单体 胶堵水剂 正交实验 吸水膨胀率
下载PDF
不同凝胶保水剂对猪肉肉串保水性的影响 被引量:1
6
作者 范素琴 黄海燕 +1 位作者 王晓梅 张娟娟 《肉类研究》 2011年第8期34-36,共3页
研究复合海藻酸钠保水剂、卡拉胶及肉串专用胶3种凝胶保水剂对猪肉肉串的保水性的影响,确定复合海藻酸钠保水剂为最佳保水剂,且确定了其添加量为0.2%,添加方式为肉串滚揉腌制后加入粉末胶。
关键词 胶保水剂 复合海藻酸钠保水剂 猪肉肉串 保水性
下载PDF
地层内聚合丙烯酰胺凝胶堵水技术的改进 被引量:9
7
作者 唐孝芬 蔡志军 +2 位作者 李宇乡 张继勇 孙桂玲 《油田化学》 CAS CSCD 北大核心 1997年第2期131-134,164,共5页
介绍了用亚硫酸盐作前置预处理液的丙烯酰胺甲叉双丙烯酰胺地层内聚合形成凝胶的新堵水方法以及该方法在封堵油井管外窜槽、松散地层出砂形成的鼠洞及出水层等方面的现场应用实例。使用该方法可减少堵剂用量,大大提高封堵成功率,封... 介绍了用亚硫酸盐作前置预处理液的丙烯酰胺甲叉双丙烯酰胺地层内聚合形成凝胶的新堵水方法以及该方法在封堵油井管外窜槽、松散地层出砂形成的鼠洞及出水层等方面的现场应用实例。使用该方法可减少堵剂用量,大大提高封堵成功率,封窜成功率为100%。 展开更多
关键词 聚合物 胶堵水剂 油井堵水 油田
下载PDF
TP系列聚丙烯酰胺凝胶堵底水技术 被引量:11
8
作者 唐孝芬 李宇乡 蔡志军 《油田化学》 CAS CSCD 北大核心 1996年第3期219-223,共5页
本文介绍了在底水驱动油层的底部注入丙烯酰胺溶液,就地聚合后形成聚丙烯酰胺凝胶隔板,防止底水上窜的油井堵底水工艺及在冀东油田柳25区块3口油井四井次现场试验的结果。所用堵剂为TP系列,分别适用于20-45℃(TP-91... 本文介绍了在底水驱动油层的底部注入丙烯酰胺溶液,就地聚合后形成聚丙烯酰胺凝胶隔板,防止底水上窜的油井堵底水工艺及在冀东油田柳25区块3口油井四井次现场试验的结果。所用堵剂为TP系列,分别适用于20-45℃(TP-911)、40-75℃(TP-910)、60-120℃(TP-915)地层,在注水井调剖、油井堵层间、层内、指进水作业中已获得广泛应用。 展开更多
关键词 聚合物 水基胶堵水剂 油井堵水
下载PDF
新型裂缝性低渗透油藏堵水剂性能评价 被引量:6
9
作者 罗宪波 蒲万芬 +2 位作者 武海燕 赵金洲 姚奕明 《石油钻采工艺》 CAS CSCD 北大核心 2005年第2期64-66,共3页
针对堵水剂在裂缝中的漏失问题,研制出二次交联聚合物凝胶堵水剂,对一次交联聚合物弱凝胶的流变性、耐剪切性、注入性和滤失性和二次交联聚合物凝胶的突破压力、封堵率、耐冲刷性、对基质伤害率和长期热稳定性进行了评价。实验结果表明... 针对堵水剂在裂缝中的漏失问题,研制出二次交联聚合物凝胶堵水剂,对一次交联聚合物弱凝胶的流变性、耐剪切性、注入性和滤失性和二次交联聚合物凝胶的突破压力、封堵率、耐冲刷性、对基质伤害率和长期热稳定性进行了评价。实验结果表明,一次交联聚合物弱凝胶具有剪切稀释的流变特征,耐剪切,注入性好,滤失量低;二次交联聚合物凝胶具有突破压力高、封堵率高、耐冲刷性强、对基质伤害率低和长期热稳定性好的特点,在裂缝性低渗透油藏堵水作业中具有明显的优势。 展开更多
关键词 低渗透油藏 裂缝性 性能评价 交联聚合物 聚合物 突破压力 耐冲刷性 热稳定性 胶堵水剂 流变特征 剪切稀释 堵水作业 封堵率 伤害率 流变性 剪切性 滤失性 滤失量 注入 基质
下载PDF
双液速凝高强度堵剂的研究 被引量:1
10
作者 程木林 王泽云 李清中 《大庆石油地质与开发》 CAS CSCD 北大核心 1998年第5期36-38,共3页
本文介绍了近期开发研制的一种新型速凝转向双组分堵剂。室内和现场试验证明,堵剂具有反应速度快、转向性能好、承压强度高、浅堵、工艺简便、有效期长等特点。
关键词 水剂 双液 油田 水剂
下载PDF
聚羧酸减水剂分子结构对吸附和水化性能影响研究 被引量:5
11
作者 方云辉 《新型建筑材料》 北大核心 2018年第11期14-17,共4页
采用红外光谱、颗粒电荷密度测试对不同类型的聚羧酸减水剂进行化学结构表征,结果表明,KZJ-1为高电荷密度长主链短支链结构,KZJ-2和KZJ-3为低电荷密度短主链长支链结构。通过净浆、混凝土试验评价减水剂的性能,通过吸附量、水化热测试... 采用红外光谱、颗粒电荷密度测试对不同类型的聚羧酸减水剂进行化学结构表征,结果表明,KZJ-1为高电荷密度长主链短支链结构,KZJ-2和KZJ-3为低电荷密度短主链长支链结构。通过净浆、混凝土试验评价减水剂的性能,通过吸附量、水化热测试等对微观机理进行分析,当减水剂掺量>0.013时,3种聚羧酸减水剂的吸附量大小依次为KZJ-2>KZJ-1>KZJ-3,同时掺KZJ-2和KZJ-3能加速水泥早期的水化,明显缩短诱导期,促进C_3A的水化,加快AFt的生成,能够缩短初凝时间。 展开更多
关键词 聚羧酸减水剂胶色谱 颗粒电荷 吸附量 水化热
下载PDF
速凝防水砂浆的研究及其在高滩地建闸赶潮施工中的应用
12
作者 王锭一 朱颂茜 《水利科技》 1994年第2期24-28,6,共6页
本文介绍了速凝防水剂配制成速凝凝防水砂浆的基本物理力学性能,探讨了速凝防水剂的促凝机理,以及速凝防水砂浆在云龙水闸赶潮施工中的应用实例.室内试验与实际工程应用结果均表明:速凝防水砂浆用于高滩地不没围堰建闸,在技术上是可行的... 本文介绍了速凝防水剂配制成速凝凝防水砂浆的基本物理力学性能,探讨了速凝防水剂的促凝机理,以及速凝防水砂浆在云龙水闸赶潮施工中的应用实例.室内试验与实际工程应用结果均表明:速凝防水砂浆用于高滩地不没围堰建闸,在技术上是可行的,提高了工程施工的安全性,并具有十分明显的经济效益. 展开更多
关键词 水剂 水闸 力学性能 材料试验 安全性 围堰
下载PDF
速凝防水砂浆在建闸中的应用研究
13
作者 王锭一 朱颂茜 《农田水利与小水电》 1995年第1期14-17,共4页
速凝防水砂浆在建闸中的应用研究王锭一,朱颂茜(福建省水利水电科研所福州市350001)福建省高滩地水闸施工大多数需要修建围堰,而围堰的建造既费时,又费工,往往又由于地质条件等外界因素的影响,给围堰的建造带来一定的困难... 速凝防水砂浆在建闸中的应用研究王锭一,朱颂茜(福建省水利水电科研所福州市350001)福建省高滩地水闸施工大多数需要修建围堰,而围堰的建造既费时,又费工,往往又由于地质条件等外界因素的影响,给围堰的建造带来一定的困难。同时,由于这种围堰属于临时性工程... 展开更多
关键词 水闸 施工 防水砂浆 水剂
下载PDF
Preparation and Characterization of lonic Conductive Eutectogels Based on Polyacrylamide Copolymers with Long Hydrophobic Chain
14
作者 Minhao Zhang Qiang Zhou +3 位作者 Jiaqing He Yongjun Xie Haiyang Yang Weidong He 《Chinese Journal of Chemical Physics》 SCIE EI CAS CSCD 2024年第5期685-695,I0101,共12页
With the blooming development of electronic technology,the use of electron conductive gel or ionic conductive gel in preparing flexible electronic devices is drawing more and more attention.Deep eutectic solvents are ... With the blooming development of electronic technology,the use of electron conductive gel or ionic conductive gel in preparing flexible electronic devices is drawing more and more attention.Deep eutectic solvents are excellent substitutes for ionic liquids because of their good biocompatibility,low cost,and easy preparation,except for good conductivity.In this work,we synthesized a reactive quaternary ammonium monomer(3-acrylamidopropyl)octadecyldimethyl ammonium bromide with a hydrophobic chain of 18 carbons via the quaternization of 1-bromooctadecane and N-dimethylaminopropyl acrylamide at first,then we mixed quaternary ammonium with choline chloride,acrylic acid and glycerol to obtain a hydrophobic deep eutectic solvent,and initialized polymerization in UV light of 365 nm to obtain the ionic conductive eutectogel based on polyacrylamide copolymer with long hydrophobic chain.The obtained eutectogel exibits good stretchability(1200%),Young's modulus(0.185 MPa),toughness(4.2 MJ/m^(3)),conductivity(0.315 S/m).The eutectogel also shows desireable moisture resistance with the maximum water absorption of 11.7 wt%after one week at 25℃and 60%humidity,while the water absorption of eutectogel without hydrophobic long chains is 24.0 wt%.The introduction of long-chain hydrophobic groups not only improves the mechanical strength of the gels,but also significantly improves moisture resistance of the eutectogel.This work provides a simpler and more effective method for the preparation of ionic conductive eutectogels,which can further provide a reference for the applications of ionic conductive eutectogels in the field of flexible electronic devices. 展开更多
关键词 Hydrophobic long-chain copolymer Deep eutectic solvent Ionic conductive eutectogel Moisture resistance
下载PDF
STUDY ON OPTIMIZATION OF HIGH PERFORMANCE CONCRETE ADMIXTURES 被引量:7
15
作者 刘俊龙 麻海燕 +2 位作者 李强 陈树东 张云清 《Transactions of Nanjing University of Aeronautics and Astronautics》 EI 2011年第2期206-210,共5页
Influences of admixtures on the workability and strength of high performance concrete (HPC) are in- vestigated. The types of investigated admixtures include naphthalene series high range water reducing agent, polyca... Influences of admixtures on the workability and strength of high performance concrete (HPC) are in- vestigated. The types of investigated admixtures include naphthalene series high range water reducing agent, polycarboxlic series high range water reduce agent and sodium sulfate hardening accelerating agent. Two kinds of curing condition, namely steam curing condition and standard curing condition, are adopted. The result shows that HPC, added with polycarboxlic series of high performance water reducer, has high workability and strength, while sodium sulfate accelerating agent causes poor workability and low strength. Thus for vapor-cured HPC and its formulations, naphthalene series high range water reducing agent with less sodium sulfate should be given pri- ority. Therefore, the differences of curing conditions should be considered when selecting HPC admixtures. 展开更多
关键词 high performance concrete high performance water reducer hardening accelerating agent SLUMP compressive strength
下载PDF
Effects of water hardness on selective flocculation of diasporic bauxite 被引量:2
16
作者 刘文莉 孙伟 胡岳华 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2012年第9期2248-2254,共7页
The effect of electrolyte on settling behavior of kaolinite was studied. Effects of hard water on selective flocculation of diasporic bauxite was tested and the measures were taken to eliminate the effects of Ca2+ an... The effect of electrolyte on settling behavior of kaolinite was studied. Effects of hard water on selective flocculation of diasporic bauxite was tested and the measures were taken to eliminate the effects of Ca2+ and Mg2+ in hard water. The results indicated that, not only the concentration of electrolyte ions but also the ionic valence of the electrolyte ions affects the settling behavior of kaolinite; hard water significantly affects its selective flocculation owing to Ca2+ and Mg2+; general dispersants could not eliminate the effects of Ca2+ and Mg2+. Self-made softening agent in our lab could weaken or eliminate the effects of hard water on flocculation processes. The results of molecular dynamics simulation show that softening agent molecules could restrict Ca2+ and prevent them from playing their roles, so as to eliminate the effects. The continuous pilot experiment results of bauxite flocculation were even better than those obtained in laboratory. 展开更多
关键词 softening agent hard water BAUXITE DISPERSANT FLOCCULATION
下载PDF
Study on coagulation property of metal-polysilicate coagulants in low turbidity water treatment 被引量:9
17
作者 杨海燕 崔福义 +1 位作者 赵庆良 马超 《Journal of Zhejiang University Science》 EI CSCD 2004年第6期721-726,共6页
In order to remove the low turbidity present in surface water, a novel metal-polysilicate coagulant was used to treat the raw water taken from Tanjiang River in Guangdong Province. This study on the effects of Al/Fe ... In order to remove the low turbidity present in surface water, a novel metal-polysilicate coagulant was used to treat the raw water taken from Tanjiang River in Guangdong Province. This study on the effects of Al/Fe molar ratio on the performance of a complex compound formed by polysilicic acid, aluminium and ferric salt (PAFS) showed that PAFS with Al/Fe ratio of 10:3 seemed to have the best coagulation performance in removing turbidity and color. Experimental results showed that under the conditions of polymerization time of 15 d, sedimentation time of 12 min, and pH of 6?8, PAFS with Al/Fe molar ratio of 10:3 had the best coagulation efficiency and lowest residual Al concentration. The turbid- ity decreased from 23.8 NTU to 3.23 NTU and the residual Al concentration was only 0.165 mg/L in the product water. It could be speculated that colloidal impurities and particulate Al were removed by adsorption bridging and electrical neu- tralization of long chain inorganic polymer coagulants. 展开更多
关键词 Potable water treatment Metal-polysilicate coagulant Coagulation property Residual aluminum
下载PDF
Characterization of a bioflocculant from a newly isolated Vagococcus sp. W31 被引量:17
18
作者 GAO Jie BAO Hua-ying +3 位作者 XIN Ming-xiu LIU Yuan-xia LI Qian ZHANG Yan-fen 《Journal of Zhejiang University-Science B(Biomedicine & Biotechnology)》 SCIE CAS CSCD 2006年第3期186-192,共7页
Screening of microorganisms producing flocculating substances was carried out. A strain secreting a large amount of bioflocculant was isolated from wastewater samples collected from the Little Moon River in Beijing. B... Screening of microorganisms producing flocculating substances was carried out. A strain secreting a large amount of bioflocculant was isolated from wastewater samples collected from the Little Moon River in Beijing. Based on the morphological properties and 16S rDNA sequence analysis, the isolate (designated W31) was classified as Vagococcus sp. A bioflocculant (named MBFW31) produced by W31 was extracted from the culture broth by ethanol precipitation and purified by gel chroma-tography. MBFW31 was heat-stable and had strong flocculating activity in a wide range of pH with relatively low dosage re-quirement. MBFW31 was identified as a polysaccharide with molecular weight over 2×106. It contained neutral sugar and uronic acid as its major and minor components, respectively. Infrared spectra showed the presence of hydroxyl, carboxyl and methoxyl group in its molecules. The present results suggested that MBFW31 had potential application in wastewater treatment. 展开更多
关键词 Vagococcus sp. BIOFLOCCULANT CHARACTERIZATION Flocculating activity
下载PDF
Enhanced primary treatment of low-concentration municipal wastewater by means of bio-flocculant Pullulan 被引量:2
19
作者 YANG Kai YANG Xiao-Jun YANG Mo 《Journal of Zhejiang University-Science A(Applied Physics & Engineering)》 SCIE EI CAS CSCD 2007年第5期719-723,共5页
Jar tests were conducted to investigate the performance of enhanced primary treatment processes for low-concentra-tion municipal wastewater from South China by using composite flocculant combined with bio-flocculants ... Jar tests were conducted to investigate the performance of enhanced primary treatment processes for low-concentra-tion municipal wastewater from South China by using composite flocculant combined with bio-flocculants Pullulan and poly-aluminum-chloride (PAC). The optimum dosage for composite flocculant and conditions for flocculation were determined. The experimental results indicated that composite flocculant had high efficiency for removing over 95% of turbidity, over 58% of CODCr (chemical oxygen demand determined with potassium dichromate), over 91% of TP (total phosphate), and over 15% of NH3-N. Moreover, it could improve sludge settling and dehydration properties, and decrease the treatment cost. 展开更多
关键词 Bio-flocculant PULLULAN Enhanced primary treatment
下载PDF
Security evaluation of compounded microbial flocculant 被引量:9
20
作者 马放 王博 +3 位作者 范春 杨基先 李百祥 刘艳滨 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2004年第1期38-42,共5页
A new kind of compounded microbial flocculant (CMBF) for water and wastewater treatment has been developed through biological technology. In order to discuss its biological security, four groups of experiments, rat ac... A new kind of compounded microbial flocculant (CMBF) for water and wastewater treatment has been developed through biological technology. In order to discuss its biological security, four groups of experiments, rat acute toxicity test via mouth, salmonella assay in vitro, mouse micronucleus in vivo test and teratogenesis test were conducted to evaluate its general toxicity, genotoxicity and generative toxicity. The experimental results showed that this type of compounded microbial flocculant was a substantial non-toxic substance based on the fact that LD50 value was over 10 mg/kg. The results from salmonella in vivo test and mouse micronucleus in vivo test revealed that the compounded microbial flocculant is a genetically non-toxic substance. Furthermore, compounded microbial flocculant has little effect on the growth of all the rats, and any morphologic abnormal phenomenon hasn’t appeared. 展开更多
关键词 compounded microbial flocculant (CMBF) generative toxicity genetic toxicity security evaluation
下载PDF
上一页 1 2 3 下一页 到第
使用帮助 返回顶部