镉原子在He－Cd激光器冷凝区凝结的蒙特卡罗模拟

用蒙特卡罗方法模拟了镉原子在Ｈｅ—Ｃｄ激光器的两种结构不同的冷凝区内的凝结，得到了镉原子在结构不同的冷凝区凝结的分布关系，对两种结构的分布关系进行了比较，表明改进冷凝区的结构，可以提高冷凝区对镉原子的凝结率。

Practice and analysis of recycling non-drinking water from air-condition and reverse-osmosis system into rainwater collection system

This paper is based on the rainwater collection project in the retrofit of the Dongyi teaching block in Zhejiang University Xixi Campus.The analysis incorporates the local meteorological data, recycling water utilization, and precipitation adjustment.The rainwater collection system in this program also adds the condensation water from the heating, ventilation and air conditioning （ HVAC） system and the concentration from the reverse-osmosis system used for watering greens and supplying waterscapes.By calculating, the quantity of the HVAC condensation water in summer is 3.48 m3/d, and the quantity of the reverse-osmosis concentrated water is 198 to 396 L/d.This method solves the water shortage caused by high evaporation in summer and low precipitation in winter.Supported by empirical monitoring data, the proposed method significantly increases the economic efficiency of the system during the summer period.

Analysis of 13Cr bloom solidification structure using CA-FE model

Solidification structure is critical in the control of the mechanical properties and quality during the continuous casting process. The thermo-physical properties of 13 Cr steel added some rare metals, such as Mo, V, Nb, are measured to better understand the solidification structure of 13 Cr bloom. A computational model using CA-FE(cellular automation-finite element) method coupled with heat transfer model is developed to describe the solidification structure in continuous casting process. It is found that the calculated solidification structure is in good agreement with the observed data. The influence of casting speed and superheat on the solidification structure of the bloom is studied in detail. In order to obtain more equiaxed crystal ratio and low degree of the segregation in the bloom, the optimized casting speed 0.6 m/min and superheat less than 25 °C are determined for the caster. Using the optimized manufacturing parameters, these samples are 60% with the equiaxed zone ratio of 8%–10% and below the degree of segregation 1.05.

Simulation of Random Crack Generation in Concrete Members with Uniform Stress Fields

The randomness of strength and deformation of concrete material is serious and should be considered both in theoretical analyses such as Finite Element Methods and engineering practice, specially for those structural members with a uniform stress field, where stresses or strains are approximately the same under loading. A mathematical ap- proach of producing a series of random variables of the ultimate tensile strain in concrete is proposed to describe the randomness ofconcrete deformation. With reinforced concrete finite elements a real model calculation method is found for the randomness of initial cracks determined by a minimum tension strain within the uniform stress fields of concrete members. The proposed methods in our paper have as aim to improve the existing method used by FEM and other rela- tive approaches, which normally pay less attention to randomness with consequences that may possibly differ from testing or practice. The method and sample computation as indicated is meaningful and comply with testing and engi- neering practice.

Pressure Drop Measurements on Distillation Columns

Pressure drops are of major importance for distillation/absorption columns. This paper mainly discusses how to correctly measure, interpret and use pressure drop data. The possible causes of incorrect pressure drop measurements are studied including the effects of pressure tap dimensions, locations, and vapor condensation etc. The effect of the static head of vapor on the pressure drop data and column pressures is evaluated. Variations of sectional pressure drops along the column are investigated based on the experimental data obtained from commercial size distillation columns at Fractionation Research, Inc. （FRI）. For a packed column, it is found that the spacing between the liquid distributor and the top of the bed affects the overall pressure drop measurements, which is confirmed by a fundamental fluid dynamics analysis.

Probability calculation of rebars corrosion in reinforced concrete using css algorithms

Reinforcement inside the concrete is protected from corrosion and its damages until several years after the construction. After corrosion initiation, the cross section of reinforcement begins to reduce and often load bearing of the reinforced concrete structure will be reduced significantly. Corrosion of reinforcements in concrete in polluted and contaminated areas can occur in two ways: chloride and carbonation. In this work, meta-heuristic approach of charged system search(CSS) is used to calculate corrosion occurrence probability due to chloride ions penetration. The model efficiency is verified by comparing the available examples in technical literature and results of Monte Carlo analysis. According to the analyses performed, using different probabilistic distributions regardless of probabilistic moments based on real distribution leads to diverse results. In addition, influence of each effective parameter in corrosion occurrence varies by changing other parameters.

Statistical Algorithm for Damage Detection of Concrete Beams Based on Piezoelectric Smart Aggregate

The functional piezoelectric ceramic smart aggregate(SA) sensors and actuators,based on piezoelectric ceramic materials such as lead zirconium titanate(PZT),were embedded into the reinforced concrete beams with three-point bending under static loading for purposes of damage detection.The SA actuators generated the desired sine sweep excitation signals online and the SA sensors received and detected real-time signals before and after damage.The wavelet analysis and statistical characteristics about damage signals were used as a signal processing and analysis tool to extract the optimal damage information and establish a statistical damage detection algorithm.The damage index-based wavelet analysis and damage probability-based probability and statistics were proposed by PZT wavebased theory and active health monitoring technology.The results showed that the existence of cracks inside largely attenuated the amplitude of active monitoring signal after the damage of beam and the attenuation was related to the severity degree of damage.The innovative statistical algorithm of damage pattern detection based PZT-SA can effectively determine damage probability and damage degree,and provide a prediction for the critical damage location of reinforced concrete structures.The developed method can be utilized for the structural health comprehensive monitoring and damage detection on line of various large-scale concrete structures.

Deformation Analysis Due to Early Loading of Concrete Buildings

The building industry has experienced in recent years a strong growth in demand in general and in the case of reinforced concrete buildings this increase has been more marked. This fact has also contributed to accelerate all stages of the production process of these constructions with more pronounced effects on the methodologies used in the constructive steps that influence directly the structural design of the building. Structures loaded at ever earlier ages, in which the strength and deformation properties of materials are not yet sufficiently mature. It is a variable that needs to be taken into account already in the design phase so that the concrete structure behaves within acceptable level of reliability taking into account design code recommendations for service life. To understand the importance of constructive effects and to assess its magnitude in the execution of reinforced concrete buildings, this paper presents result from nonlinear analyses using finite element method adopting an approach commonly referred as staged construction applied to a typical building found in the practice. The effects of creep and shrinkage were considered and the results obtained demonstrate that the strains due to constructive effects can, in certain cases, assume representative values which, if ignored, can lead to important pathologies in the building.

Analytical Modeling for Corrosion-Induced Cover Cracking of Corrosive Reinforced Concrete Structures

An analytical model for predicting the corrosion-induced cracking of concrete cover of reinforced concrete(RC) structures was developed.The effects of influence factors such as practical initial defects,corrosion rate,strength and elastic modulus of concrete on the corrosion-induced cracking of concrete cover were investigated.It was found that the size of practical initial defects was the most effective factor.Therefore,improving the compactness of concrete is an effective way to improve the durability of RC structures.It was also demonstrated that the accelerated corrosion tests may be unfavorable in the study of the relationship between cracking time and crack width.

Culture of Scenedesmus acuminatus in Corn Steep Liquor

Microalgae have been evaluated as a source of lipids for biodiesel production. They can be grown on effluent and produce biomass while removing organic and mineral components from the medium. The use of agro-industrial wastes for the production of microalgae is an alternative to reduce the costs related to the composition of the culture medium, thus reducing operational costs considerably. This work was conceived as a research about the cultivation of microalgae Scenedesmus acuminatus on the substrate composed by corn steep liquor. A central composite design （CCD） was carried to study the influence of the effluent and inoculum concentration on the chemical oxygen demand （COD） of the culture. Statistical analysis indicated that the percentage of inoculum and effluent had an influence on the COD. The cultivation, together with the coagulation procedure, was efficient for the removal of organic matter, verified through the COD reduction and changing of pH value. These two parameters reached the appropriate level according to the standard required by current legislation.

The Technology Analysis of Blast Furnace Foundation Large Volume of Concrete Structure Construction at Minus Temperature Severe Winter

Construction of mass concrete structures face more challenges in temperature difference and complex stress under low temperature than the ambient temperature. It has been proved by the practice that, not only improving tensile strength of structural concrete as soon as possible and removing of constrain as much as possible, but also calculation of the thermal stress in the process of construction and maintenance, controlling structure of concrete tensile strength and temperature difference stress ratio can ensure the safety and defect-free.

Deformation Analysis of LRC Underground Gas Storage

The risk during construction and in the operation of the underground gas storage （UGS） was analyzed. One of most important risk which should be prevented is large deformation or destruction of the steel lining. The specific deformation of the steel lining needs to be inside the acceptable value. This paper presents lined rock cavern （LRC） concept and specific deformations, which can occur under operation of underground gas storage. Analysis is performed with different （3D model and axis symmetrical） FEM models and analytical model. We made a comparison between analytical calculation and FEM calculation. Concrete wall is mechanically not regarded as reinforced concrete structure which means that concrete will crack. Finally, we determined the minimum value of Young＇s modulus, which satisfies the condition of maximum deformation of steel lining.

Degradation process assessment of prestressed concrete continuous bridges in life-cycle

To accurately evaluate the degradation process of prestressed concrete continuous bridges exposed to aggressive environments in life-cycle,a finite element-based approach with respect to the lifetime performance assessment of concrete bridges was proposed.The existing assessment methods were firstly introduced and compared.Some essential mechanics problems involved in the degradation process,such as the deterioration of materials properties,the reduction of sectional areas and the variation of overall structural performance caused by the first two problems,were investigated and solved.A computer program named CBDAS(Concrete Bridge Durability Analysis System) was written to perform the above-metioned approach.Finally,the degradation process of a prestressed concrete continuous bridge under chloride penetration was discussed.The results show that the concrete normal stress for serviceability limit state exceeds the threshold value after 60 a,but the various performance indicators at ultimate limit state are consistently in the allowable level during service life.Therefore,in the case of prestressed concrete bridges,the serviceability limit state is more possible to have durability problems in life-cycle;however,the performance indicators at ultimate limit state can satisfy the requirements.

Sensitivity Study on Durability Variables of Marine Concrete Structures

In order to study the influence of parameters on durability of marine concrete structures, the parameter＇s sensitivity analysis was studied in this paper. With the Fick＇s 2nd law of diffusion and the deterministic sensitivity analysis method （DSA）, the sensitivity factors of apparent surface chloride content, apparent chloride diffusion coefficient and its time dependent attenuation factor were analyzed. The results of the analysis show that the impact of design variables on concrete durability was different. The values of sensitivity factor of chloride diffusion coefficient and its time dependent attenuation factor were higher than others. Relative less error in chloride diffusion coefficient and its time dependent attenuation coefficient induces a bigger error in concrete durability design and life prediction. According to probability sensitivity analysis （PSA）, the influence of mean value and variance of concrete durability design variables on the durability failure probability was studied. The results of the study provide quantitative measures of the importance of concrete durability design and life prediction variables. It was concluded that the chloride diffusion coefficient and its time dependent attenuation factor have more influence on the reliability of marine concrete structural durability. In durability design and life prediction of marine concrete structures, it was very important to reduce the measure and statistic error of durability design variables.

Improved modal truncation error in the directly analytical method for damage identification of frame structures

The damage identification is made by the numerical simulation analysis of a five-storey-and-two-span RC frame structure, using improved and unimproved direct analytical method respectively; and the fundamental equations were solved by the minimal least square method （viz. general inverse method）. It demonstrates that the feasibility and the accuracy of the present approach were impoved significantly, compared with the result of unimproved damage identification.

Experimental research and numerical simulation of RC beams strengthened with bonded steel plates

It is a common method to strengthen the damaged RC structures with bonded steel plates. At present the ultimate bearing ca- pacity of RC structures strengthened with bonded steel plates is calculated mostly using the theory based on the test. Four beams, including one reference beam, two strengthened concrete beams in primary force and secondary force respectively, and one strengthened concrete beam which was not anchored enough, were tested under four-point bending (4PB) in order to get the data of strain of longitudinal bars, bonded bottom steel plate in tension and deflection of beams in the middle span. The experimental program was supported by a three-dimensioned finite analysis using ABAQUS. At the end of experiments and finite analysis, it is concluded that the investing strengthening technique can significantly improve the load-carrying capacity and the phenomenon of stress concentration at the end of interface, as well as the damage at interface, can be well simulated with cohesive element provided by ABAQUS.

Application of Brillouin Optical Correlation Domain Analysis for Crack Identification in Concrete Structure

This paper investigates the application of distributed optical fiber strain sensors to civil engineering structures, because no other tool can satisfactorily detect the location of the unpredictable phenomenon. In fact, the locations of cracks in the concrete structure are unknown a priori; therefore, a fully distributed sensor is necessary to detect them. The Brillouin optical correlation domain analysis （BOCDA）, which offers high spatial resolution by using stimulated Brillouin scattering along the whole length of the optical fiber, is used in a wide range of civil engineering applications, and the same has undergone significant development over the last decade. In this paper, it is demonstrated how a BOCDA-based strain sensor can be employed to monitor cracks in concrete. Crack monitoring on the surface of the concrete member provides useful information for evaluating stiffness and durability of the structure, particularly for early detection of tiny cracks, which is essential for preventing crack growth and dispersion. The crack-induced strain distribution was analytically investigated, and it was proved that BOCDA can identify even a small crack before its visual recognition by a beam test. Moreover, periodical crack monitoring was successfully executed on a pedestrian deck for five years.