Based on the triaxial testing machine and discrete element method, the effects of embedded crack on rock fragmentation are investigated in laboratory tests and a series of numerical investigations are conducted on the...Based on the triaxial testing machine and discrete element method, the effects of embedded crack on rock fragmentation are investigated in laboratory tests and a series of numerical investigations are conducted on the effects of discontinuities on cutting characteristics and cutting efficiency. In laboratory tests, five propagation patterns of radial cracks are observed. And in the numerical tests, firstly, it is similar to laboratory tests that cracks ahead of cutters mainly initiate from the crushed zone, and some minor cracks will initiate from joints. The cracks initiating from crushed zones will run through the thinner joints while they will be held back by thick joints. Cracks tend to propagate towards the tips of embedded cracks, and minor cracks will initiate from the tips of embedded cracks, which may result in the decrease of specific area, and disturbing layers play as ‘screens', which will prevent cracks from developing greatly. The peak penetration forces, the consumed energy in the penetration process and the uniaxial compression strength will decrease with the increase of discontinuities. The existence of discontinuities will result in the decrease of the cutting efficiency when the spacing between cutters is 70 mm. Some modifications should be made to improve the efficiency when the rocks containing groups of discontinuities are encountered.展开更多
The cutting burr is one of the common phenomena occurring in metal cutting.In this paper,the forming processes,main effect factors and change law of the cutting direction burr in orthogonal cutting have been studied a...The cutting burr is one of the common phenomena occurring in metal cutting.In this paper,the forming processes,main effect factors and change law of the cutting direction burr in orthogonal cutting have been studied and related theories are analyzed based on the cutting experiments.The result shows that:(1)the forming processes of cutting direction burr consist of normal cutting,flexure deformation of end surface of workpiece,plastic effect,continuous cutting and shear break separating in orthogonal cutting;(2)a new phenomenon is found that cutting direction burr is formed with the shear break separation of the chip and workpiece machined surfaces;(3)the size of cutting direction burr varies with workpiece materials,cutting parameters and geometric parameters of the cutting tool.展开更多
基金Project(2013CB035401) supported by the National Basic Research Program of ChinaProject(51174228) supported by the National Natural Science Foundation of China+1 种基金Project(71380100003) supported by Hunan Provincial Innovation Foundation for Postgraduate,ChinaProject(201304) supported by Open Research Fund of Hunan Province Key Laboratory of Safe Mining Techniques of Coal Mines(Hunan University of Science and Technology),China
文摘Based on the triaxial testing machine and discrete element method, the effects of embedded crack on rock fragmentation are investigated in laboratory tests and a series of numerical investigations are conducted on the effects of discontinuities on cutting characteristics and cutting efficiency. In laboratory tests, five propagation patterns of radial cracks are observed. And in the numerical tests, firstly, it is similar to laboratory tests that cracks ahead of cutters mainly initiate from the crushed zone, and some minor cracks will initiate from joints. The cracks initiating from crushed zones will run through the thinner joints while they will be held back by thick joints. Cracks tend to propagate towards the tips of embedded cracks, and minor cracks will initiate from the tips of embedded cracks, which may result in the decrease of specific area, and disturbing layers play as ‘screens', which will prevent cracks from developing greatly. The peak penetration forces, the consumed energy in the penetration process and the uniaxial compression strength will decrease with the increase of discontinuities. The existence of discontinuities will result in the decrease of the cutting efficiency when the spacing between cutters is 70 mm. Some modifications should be made to improve the efficiency when the rocks containing groups of discontinuities are encountered.
基金Supported by National Natural Science Foundation of China (No.59775071).
文摘The cutting burr is one of the common phenomena occurring in metal cutting.In this paper,the forming processes,main effect factors and change law of the cutting direction burr in orthogonal cutting have been studied and related theories are analyzed based on the cutting experiments.The result shows that:(1)the forming processes of cutting direction burr consist of normal cutting,flexure deformation of end surface of workpiece,plastic effect,continuous cutting and shear break separating in orthogonal cutting;(2)a new phenomenon is found that cutting direction burr is formed with the shear break separation of the chip and workpiece machined surfaces;(3)the size of cutting direction burr varies with workpiece materials,cutting parameters and geometric parameters of the cutting tool.
