The fracture behaviour of three fiber reinforced and regular HPC (high performance concretes) is presented in this paper. Two mixes are based on optimization of HPC whereas the third mix was a commercial mix develop...The fracture behaviour of three fiber reinforced and regular HPC (high performance concretes) is presented in this paper. Two mixes are based on optimization of HPC whereas the third mix was a commercial mix developed by CONTEC ApS (Denmark). The wedge splitting test setup with 48 cubical specimens was used experimentally and the cracked non-linear hinge model based on the fictitious crack model was applied for the interpretation of the results. The stress-crack opening relationships were extracted by using inverse analysis algorithm for various multi-linear softening curves. This showed that the refinement of the softening curves reflects in improved accuracy of the WST (wedge splitting test) simulation in comparison with bi-linear softening curves with acceptable increase of computational time. Furthermore, the fracture mechanics parameters such as COD (crack opening displacement), fracture energy and characteristic length were experimentally determined. Experiments were performed at 1, 3, 7 and 28 days. Fracture energy, Gf, was found to increase with age, while the characteristic length, Lch, was found to decrease.展开更多
A discontinuous deformation and displacement(DDD) analysis method is proposed for modelling the rock failure process. This method combines the rock failure process analysis(RFPA) method(based on finite element method)...A discontinuous deformation and displacement(DDD) analysis method is proposed for modelling the rock failure process. This method combines the rock failure process analysis(RFPA) method(based on finite element method) and discontinuous deformation analysis(DDA) method. RFPA is used to simulate crack initiation, propagation and coalescence processes of rock during the small deformation state. The DDA method is used to simulate the movement of blocks created by the multiple cracks modelled by the RFPA. The newly developed DDD method is particularly suitable for modelling both crack propagation and block movement during the rock failure process because of the natural and convenient coupling of continuous and discontinuous deformation analyses. The proposed method has been used to simulate crack initiation, propagation and coalescence within a slope as well as the block movement during the landslide process. Numerical modelling results indicate that the proposed DDD method can automatically simulate crack propagation and block movement during the rock failure process without degrading accuracy.展开更多
文摘The fracture behaviour of three fiber reinforced and regular HPC (high performance concretes) is presented in this paper. Two mixes are based on optimization of HPC whereas the third mix was a commercial mix developed by CONTEC ApS (Denmark). The wedge splitting test setup with 48 cubical specimens was used experimentally and the cracked non-linear hinge model based on the fictitious crack model was applied for the interpretation of the results. The stress-crack opening relationships were extracted by using inverse analysis algorithm for various multi-linear softening curves. This showed that the refinement of the softening curves reflects in improved accuracy of the WST (wedge splitting test) simulation in comparison with bi-linear softening curves with acceptable increase of computational time. Furthermore, the fracture mechanics parameters such as COD (crack opening displacement), fracture energy and characteristic length were experimentally determined. Experiments were performed at 1, 3, 7 and 28 days. Fracture energy, Gf, was found to increase with age, while the characteristic length, Lch, was found to decrease.
基金supported by the National Basic Research Program of China("973"Project)(Grant No.2014CB047100)the National Natural Science Foundation of China(Grant Nos.51421064,51474046 & 51174039)the Fundamental Research Funds for the Central Universities(Grant No.DUT14LK21)
文摘A discontinuous deformation and displacement(DDD) analysis method is proposed for modelling the rock failure process. This method combines the rock failure process analysis(RFPA) method(based on finite element method) and discontinuous deformation analysis(DDA) method. RFPA is used to simulate crack initiation, propagation and coalescence processes of rock during the small deformation state. The DDA method is used to simulate the movement of blocks created by the multiple cracks modelled by the RFPA. The newly developed DDD method is particularly suitable for modelling both crack propagation and block movement during the rock failure process because of the natural and convenient coupling of continuous and discontinuous deformation analyses. The proposed method has been used to simulate crack initiation, propagation and coalescence within a slope as well as the block movement during the landslide process. Numerical modelling results indicate that the proposed DDD method can automatically simulate crack propagation and block movement during the rock failure process without degrading accuracy.