基于NOMA的共生反向散射通信的性能分析

非正交多址接入和环境反向散射通信是提高无线通信系统频谱效率的关键技术.针对能量受限问题,提出了一种基于瑞利衰落信道的下行非正交多址接入多路传输的共生反向散射通信系统.该系统由1个源节点S、1个反向散射设备BD和1个目的节点D组成.考虑到实际的非线性能量收集模型,在满足反射设备的能量因果约束的情况下,采用了一种最优动态反射系数以最大化反向散射信号的功率,推导了该系统中断概率的解析表达式,通过仿真验证了理论推导的正确性.仿真结果表明,反射设备电路的自身损耗对系统中断性能有重要影响.此外,通过仿真对比分析了基于非正交多址的共生反向散射通信系统和基于正交多址的共生反向散射通信系统性能,结果表明基于非正交多址的共生反向散射通信系统具有更好的中断性能.

珍珠岩微粉表面改性及应用研究

以信阳珍珠岩为原料、硅烷偶联剂为改性剂 ,探讨了珍珠岩表面改性的工艺条件和改性机理 ,经渗透时间、接触角、分散性、红外光谱等表征 ,证实珍珠岩微粉被硅烷包覆 ,改性后的珍珠岩憎水性显著增强 ,表明改性后的珍珠岩微粉 ,因其硬度大 ,可作为优质填料应用于橡胶、塑料等领域。

Surfactant-assisted hydrothermally synthesized MoS_2 samples with controllable morphologies and structures for anthracene hydrogenation

MoS_2 samples with controllable morphologies and structures were synthesized using surfactantassisted hydrothermal processes.The effects of surfactants（PEG,PVP,P123,SDS,AOT,and CTAB）on the morphologies and structures of MoS_2 samples were investigated.The results revealed that spherical,bulk-like,and flower-like MoS_2 particles assembled by NH4~＋-intercalated MoS_2 nano-sheets were synthesized.The morphologies of the MoS_2 samples and their structures（including the slab length and the number of stacked layers） of MoS_2 nano-sheets in these samples could be controlled by adjusting the surfactants.Mono-dispersed spherical MoS_2 particles could be synthesized with PEG via the creation of MoS_2 nano-sheets with slab lengths shorter than 15 nm and fewer than six stacked layers.Possible formation mechanisms of these MoS_2 samples created via surfactant-assisted hydrothermal processes are proposed.Further,the catalytic activities of MoS_2 samples for anthracene hydrogenation were evaluated in a slurry-bed reactor.The catalyst synthesized with the surfactant PEG exhibited the highest catalytic hydrogenation activity.Compared with the other catalysts,it had a smaller particle size,mono-dispersed spherical morphology,shorter slab length,and fewer stacked layers;these were all beneficial to exposing its active edges.This work provides an efficient approach to synthesize transition metal sulfides with controllable morphologies and structures.

Effect of metallic ions on dispersibility of fine diaspore

Dispersion experiments were conducted to study the influence of metallic cations on the dispersibility of diaspore. The reaction mechanisms were investigated based on the analysis of zeta （ξ） potential and calculations of solution chemistry and DLVO theory. The results show that the valence of cations, instead of the cation type, plays an important role in the dispersibility of diaspore The impact of multivalent metallic cations is greater than that of monovalent cations. In the presence of Ca^2＋ and Mg^2＋, the dispersion of diaspore doesn＇t change in the range of pH value below 10. However, Ca^2＋ and Mg^2＋ may induce strong coagulation of particles when pH value is higher than 10. The adsorption of species of calcium and magnesium ions on diaspore can cause the compression of electric double layer, the decrease of the absolute value of zeta potential and the repulsion force between diaspore particles. The new IEP （isoelectric point） appeared at pH value of 11 may attribute to the adsorption of Mg（OH）2（s）.

NH_3 selective catalytic reduction of NO: A large surface TiO_2 support and its promotion of V_2O_5 dispersion on the prepared catalyst

A titania support with a large surface area was developed, which has a BET surface area of 380.5 m^2/g, four times that of a traditional titania support. The support was ultrasonically impregnated with 5 wt% vanadia. A special heat treatment was used in the calcination to maintain the large surface area and high dispersion of vanadium species. This catalyst was compared to a common V2O5-TiO2 catalyst with the same vanadia loading prepared by a traditional method. The new catalyst has a surface area of 117.7 m^2/g, which was 38% higher than the traditional V2O5-TiO2 catalyst. The selective catalytic reduction（SCR） performance demonstrated that the new catalyst had a wider temperature window and better N2 selectivity compared to the traditional one. The NO conversion was 80% from 200 to 450 °C. The temperature window was 100 °C wider than the traditional catalyst. Raman spectra indicated that the vanadium species formed more V-O-V linkages on the catalyst prepared by the traditional method. The amount of V-O-Ti and V=O was larger for the new catalyst. Temperature programmed desorption of NH3, temperature programmed reduction by H2 and X-ray photoelectron spectroscopy results showed that its redox ability and total acidity were enhanced. The results are helpful for developing a more efficient SCR catalyst for the removal of NOx in flue gases.

Effect of surfactants on dispersion property and morphology of nano-sized nickel powders

Fine face-centered cubic (FCC) nickel powders were synthesized by liquid phase reduction with different surfactants. The products were investigated by scanning electron microscopy (SEM), laser particle size analyzer and X-ray powder diffraction (XRD). The results indicate that the type, dosage and relative molecular mass of surfactants significantly impact the purity, dispersion property, particle size, size distribution and morphology of the products. The nonionic surfactants poly ethylene glycol (PEG) and polyethylene glycol sorbitan monostearate (Tween) showed better dispersing ability in the reaction system than the others. The optimal mass ratios of surfactant to Ni are 100 mg/g and 150 mg/g for PEG-600 and Tween-40, respectively. The products obtained in the optimal conditions have ideal morphology and narrow size distribution. Moreover, study on the relative molecular mass effect revealed that with the increase of the relative molecular mass of Tween, the morphology of nickel powders changed from sphere to spiny ball.

WEIGHTED LEAST SQUARE METHOD FOR S-N CURVE FITTING

An S-N curve fitting approach is proposed based on the weighted least square method, and the weights are inversely proportional to the length of mean confidence intervals of experimental data sets. The assumption coincides with the physical characteristics of the fatigue life scatter. Two examples demonstrate the method. It is shown that the method has better accuracy and reasonableness compared with the usual least square method.

BLOCK SPECTRUM CHARACTERISTICS AND FATIGUE CRACK RANDOM GROWTH

Two parameters,block spectrum intensity Seq and spectrum shape factor a,which describe the characteristics of the loading block spectrum are defined,and the relationship between the parameters and fatigue crack propagation behaviours is investigated.It is shown that the spectrum intensity is an 'average drive force' of fatigue crack propagation,and the variance of fatigue crack size at a given fatigue life is closely related to the spectrum shape factor α.

Microstructure and mechanical properties of cryo-rolled AA6061 Al alloy

The microstructure and mechanical properties of the age hardening AA6061 Al alloy subjected to cryo-rolling（CR） and room temperature rolling（RTR） treatments were investigated. The rolled and aged alloys were analyzed by using DSC, EBSD, TEM, Vickers hardness analysis and tensile test. The results show that the cryo-rolled treatment has an effect on the precipitation sequence of AA6061 Al alloy. The ultrafine grain structures are formed to promote the fine second phase particles to disperse in the aluminum matrix after the peak aging, which is attributed to lots of dislocations tangled in the rolling process. Therefore, the strength and ductility of AA6061 Al alloy are simultaneously modified after the cryo-rolling and aging treatment compared with room temperature rolled one.

New signature scheme based on two cryptographic assumptions

In order to improve the security of the signature scheme, a digital signature based on two hard-solved problems is proposed. The discrete logarithm problem and the factoring problem are two well known hard- solved mathematical problems. Combining the E1Gamal scheme based on the discrete logarithm problem and the OSS scheme based on the factoring problem, a digital signature scheme based on these two cryptographic assumptions is proposed. The security of the proposed scheme is based on the difficulties of simultaneously solving the factoring problem and the discrete logarithm problem. So the signature scheme will be still secure under the situation that any one of the two hard-problems is solved. Compared with previous schemes, the proposed scheme is more efficient in terms of space storage, signature length and computation complexities.

Finite-difference modeling of surface waves in poroelastic media and stress mirror conditions

During seismic wave propagation on a free surface, a strong material contrast boundary develops in response to interference by P- and S- waves to create a surface-wave phenomenon. To accurately determine the effects of this interface on surface-wave propagation, the boundary conditions must be accurately modeled. In this paper, we present a numerical approach based on the dynamic poroelasticity for a space–time-domain staggered-grid finite-difference simulation in porous media that contain a free-surface boundary. We propose a generalized stess mirror formulation of the free-surface boundary for solids and fluids in porous media for the grid mesh on which lays the free-surface plane. Its analog is that used for elastic media, which is suitable for precise and stable Rayleigh-type surface-wave modeling. The results of our analysis of first kind of Rayleigh （R1） waves obtained by this model demonstrate that the discretization of the mesh in a similar way to that for elastic media can realize stable numerical solutions with acceptable precision. We present numerical examples demonstrating the efficiency and accuracy of our proposed method.

A Decentralized Autonomous Control on Highly Redundant Robot Manipulators

The control method of highly redundant robot manipulators is introduced. A decentralized autonomous control scheme is used to guide the movement of robot manipulators so that the work done by manipulators is minimized. The method of computing pseudoinverse which needs too many complicated calculation can be avoided. Then the calculation and control of robots are simplified. At the same time system robustness/fault tolerance is achieved.

Size effects on plastic deformation behavior in micro radial compression of pure copper

Micro radial compression tests were carried out on cylindrical specimens of pure copper polycrystals with different grain sizes. Experimental results indicated that phenomena of decreasing forming force, increasing scatter of forming force and more irregular surface topography occurred with the increase of grain size. A modified surface model based on dislocations pile-up in surface layer grains, and a flow stress scattering formulation based on standard deviation and grain size distribution were proposed to analyze size effects on forming force in micro compression. The inhomogeneous deformation of surface layer grains was discussed by the main deformation manner of rotation. A good agreement with the experimental results was achieved.

MATHEMATICAL ANALYSIS OF DRUG RELEASE FROM A MONOLITHIC MATRIX WITH AN INITIALLY LINEAR CONCENTRATION DISTRIBUTION

Based on the principle of chemical engineering in the multisubject field—drug delivery, the release kinetics of the slab monolithic matrix with an initially linear concentration distribution is studied in this paper. It can be used to describe the later stage when drug loading is above its solubility limit. A comprehensive model is proposed and the generalized solutions are acquired by Laplace transformation, from which a special case, i.e. a perfect sink has been deduced. According to the derived equations, the concentration profiles in the matrix has been computed and illustrated and the effect of volume of extraction medium on release has been investigated.

Dissipative Particle Dynamics Simulation of Microscopic Properties in Diblock Copolymer Films

Mean-square bond length, root-mean-square end-to-end distance and gyration radius in diblock copolymer films have been studied by dissipative particle dynamics simulations. Results show evident linear trends of any property separately with the thickness of film, the interaction between particles of different types, the repulsion between particle and boundary, except for the dependence of the variations of mean-square bond length on the thickness of film, which exhibits as a wave trend. What＇s more, the varying trends of mean-square bond length and root-mean-square end-to-end distance can correspond to each other. The density distribution of either component in diblock copolymer film can be controlled and adjusted effectively through its interaction with boundary.

Dispersion of graphene in silane coupling agent aqueous solutions

In order to reduce the agglomeration of nanographene and improve its dispersibility,six silane coupling agents were used to modify the surface of the nanographene particles.Visual inspection,Fourier-transform infrared spectroscopy,transmission electron microscopy,Raman spectroscopy,and X-ray diffraction were employed to evaluate the dispersion properties of the resulting graphene in an aqueous solution of silane coupling agents.Results show that all six types of silane coupling agents are efficient in promoting the dispersion of graphene in aqueous solutions,and no obvious sedimentation of the graphene dispersion solution is observed after a stationary storage period of 30 d.Taking 3-aminopropyltriethoxysilane(KH-550)as an example,after the graphene is dispersed in the KH-550 aqueous solution,the carboxyl group on the surface of the graphene reacts with the KH-550 amino group to form an amide bond,and KH-550 is successfully grafted onto the graphene surface.Polar functional groups ionize in water,creating an electrostatic repulsion effect,or hydrophilic functional groups form hydrogen bonds with water molecules,which is believed to improve the dispersion stability of graphene.The dispersed graphene is curled and contains many folds.Each fold has about three or four layers,with an interlayer spacing of about 0.65 nm.The dispersed graphene also has a complete lattice and a reduced number of defects.Nanographene disperses well in silane coupling agent aqueous solutions and can,therefore,be used to prepare cement-based composites.

Controllable preparation of ZnO porous flower through a membrane dispersion reactor and their photocatalytic properties

Three dimensional (3D) flower-like basic zinc carbonate constructed by multilayered nanoplates were rapidly prepared at room temperature through the direct precipitation method coupled with membrane dispersion technology, and porous ZnO with similar structures could be obtained after calcining the precursor. The structural properties of the products before and after the calcining process were characterized by SEM, TEM and XRD.The supersaturation of the reaction system due to the membrane dispersion played an important role in the formation of uniform Zn_5(CO_3)_2(OH)_6 precursors. A plausible mechanism was proposed for the formation of the flower-like ZnO assembled by nanoplates composed of nanoparticles. The obtained ZnO microspheres showed excellent photocatalytic properties, which could be attributed to the open structure and remarkable amount of porous nanoplates.

Preparation of Monodispersed O/W Emulsion by Ceramic External Membrane Emulsification System——Preliminary Study on Integrated Ceramic Membrane Emulsification Reactor

A new reactor with integrated conventional slurry stirred reactor and ceramic external membrane emulsification system, was introduced in this paper. Toluene and toluene containing surfactant was separately used as dispersed phase for preparation of emulsions. Two kinds of emulsions were prepared and compared. The volume average sizes of prepared emulsions were 3.53μm and 3.6μm respectively. The results showed that the droplet sizes of two kinds of emulsions were similar, but the monodispersed emulsion was only obtained with addition of surfactant into the dispersed phase.

Effective recovery of chalcopyrite at low temperatures using modified ester collector

The effect of a modified ester collector named as BL on the flotation of chalcopyrite at low temperatures was investigated by micro-flotation tests,contact angle measurements,adsorption experiments,laser particle size analysis,cryogenic transmission electron microscopy(Cryo-TEM)and Fourier transform infrared(FTIR)analyses.Micro-flotation tests proved that the collecting ability of BL for chalcopyrite was significantly better than that of N,N-diethyl dithiocarbamate propiononitrile ester(ester-105)at low temperatures.Combined with laser particle size,Cryo-TEM and FTIR analyses,it was found that the particle size of BL in water was smaller than that of ester-105,and the distributed density of BL was higher than that of ester-105 at low temperatures,indicating that BL dispersed well at low temperatures.Therefore,BL was more easily adsorbed on the chalcopyrite surface and improved the surface hydrophobic degree of chalcopyrite,which were also confirmed by the contact angle measurements and adsorption experiments.