重视小学数学校本作业分层设计促进学生成才

在过去的小学数学教学过程中，不论是基础好的学生，还是基础差的学生，教师在布置校本作业的过程中都是不加以区别的。这就导致了基础好的学生认为作业过于简单，提不起对数学深入了解的兴趣，而对于基础差的学生来讲，这样的作业又是他们学习数学的拦路虎，使他们对数学学习望而却步。在新课改的推动下，这种现象更加不利于教师的教学，因此，数学校本作业分层设计显得异常重要。文章将讨论小学数学校本作业分层设计的具体措施以及作业分层设计的意义。

基于“双减”背景下的小学数学作业高质量分层设计研究

受到“双减”政策的影响,要求中小学在课后作业布置方面做到减轻学生生理层面与心理层面的负担。教师在布置小学数学作业时应意识到这是对课堂教学的补充,旨在巩固课上知识,应贯彻高质量分层设计的数学作业布置方式,对作业的内容和形式尽可能做到多样性,以此提高学生对做作业的兴趣。注重对学生与作业的分层处理,实现作业批改的层次化,缩短学生做作业的时间,提高数学课堂的教学质量。

Microstructure and properties of Ti64.51Fe26.40Zr5.86Sn2.93Y0.30 biomedical alloy fabricated by laser additive manufacturing

From the perspective of biomechanics and forming technology,Ti−Fe−Zr−Sn−Y eutectic alloy was designed using a“cluster-plus-glue-atom”model,and then the alloy was prepared by laser additive manufacturing(LAM)on pure titanium substrate.The mechanical properties of the alloy were evaluated using micro-hardness and compression tester,and the elastic modulus was measured by nanoindenter.The results show that the alloy exhibits a high hardness of HV(788±10),a high strength of 2229 MPa,a failure strain of 14%,and a low elastic modulus of 87.5 GPa.The alloy also has good tribological,chemical,forming,and biological properties.The comprehensive performances of the Ti64.51Fe26.40Zr5.86Sn2.93Y0.30 alloy are superior to those of the Ti70.5Fe29.5 eutectic alloy and commercial Ti−6Al−4V alloy.All the above-mentioned qualities make the alloy a promising candidate as LAM biomaterial.

Microstructures and mechanical properties of Ti−Al−V−Nb alloys with cluster formula manufactured by laser additive manufacturing

Ti−Al−V−Nb alloys with the cluster formula,12[Al−Ti_(12)](AlTi_(2))+5[Al−Ti1_(4)](V,Nb)2Ti,were designed by replacing V with Nb based on the Ti−6Al−4V alloy.Single-track cladding layers and bulk samples of the alloys with Nb contents ranging from 0 to 6.96 wt.%were prepared by laser additive manufacturing to examine their formability,microstructure,and mechanical properties.For single-track cladding layers,the addition of Nb increased the surface roughness slightly and decreased the molten pool height to improve its spreadability.The alloy,Ti−5.96Al−1.94V−3.54Nb(wt.%),exhibited better geometrical accuracy than the other alloys because its molten pool height was consistent with the spread layer thickness of the powder.The microstructures of the bulk samples contained similar columnar β-phase grains,regardless of Nb content.These grains grew epitaxially from the Ti substrate along the deposition direction,with basket-weaveα-phase laths within the columnar grains.Theα-phase size increased with increasing Nb contents,but its uniformity decreased.Along the deposition direction,the Vickers hardness increased from the substrate to the surface.The Ti−5.96Al−1.94V−3.54Nb alloy exhibited the highest Vickers hardness regardless of deposition position because of the optimal matching relationship between theα-phase size and its content among the designed alloys.

SOLVING MINIMUM SPANNING TREE PROBLEM WITH DNA COMPUTING

Molecular programming is applied to minimum spanning problem whose solution requires encoding of real values in DNA strands. A new encoding scheme is proposed for real values that is biologically plausible and has a fixed code length. According to the characteristics of the problem, a DNA algorithm solving the minimum spanning tree problem is given. The effectiveness of the proposed method is verified by simulation. The advantages and disadvantages of this algorithm are discussed.

Design Energy Efficient Water Utilization Systems Allowing Operation Split

This article deals with the design of energy efficient water utilization systems allowing operation split. Practical features such as operating flexibility and capital cost have made the number of sub operations an important parameter of the problem. By treating the direct and indirect heat transfers separately, target freshwater and energy consumption as well as the operation split conditions are first obtained. Subsequently, a mixed integer non-linear programming （MINLP） model is established for the design of water network and the heat exchanger network （HEN）. The proposed systematic approach is limited to a single contaminant. Example from literature is used to illustrate the applicability of the approach.

Application of grey relational analysis in sheet metal forming for multi-response quality characteristics

The theory of grey systems is a new technique for performing prediction, relational analysis and decision making in many areas. In this paper, the use of grey relational analysis for optimizing the square hole flanging process parameters with considerations of the multiple response (the average flanging height, regular flanging and maximum strain) is introduced. Various flanging parameters, such as the blank inner radius rb, blank inner width B0, are considered. An orthogonal array is used for the experimental design. Multiple response values are obtained using finite element analysis (FEA). Optimal process parameters are determined by the grey relational grade obtained from the grey relational analysis for multi-performance characteristics (flanging height, regular flanging and maximum strain). Analysis of variance (ANOVA) for the grey relational grade is implemented. The results showed good agreement with the experiment result. Grey relational analysis can be applied in multiple response optimi-zation designs.

Optimization of Culture Conditions and Medium Composition for the Marine Algicidal Bacterium Alteromonas sp. DH46 by Uniform Design

Harmful algal blooms(HABs) have led to extensive ecological and environmental issues and huge economic losses.Various HAB control techniques have been developed,and biological methods have been paid more attention.Algicidal bacteria is a general designation for bacteria which inhibit algal growth in a direct or indirect manner,and kill or damage the algal cells.A metabolite which is strongly toxic to the dinoflagellate Alexandrium tamarense was produced by strain DH46 of the alga-lysing bacterium Alteromonas sp.The culture conditions were optimized using a single-factor test method.Factors including carbon source,nitrogen source,temperature,initial pH value,rotational speed and salinity were studied.The results showed that the cultivation of the bacteria at 28℃ and 180 r min-1with initial pH 7 and 30 salt contcentration favored both the cell growth and the lysing effect of strain DH46.The optimal medium composition for strain DH46 was determined by means of uniform design experimentation,and the most important components influencing the cell density were tryptone,yeast extract,soluble starch,NaNO3 and MgSO4.When the following culture medium was used(tryptone 14.0g,yeast extract 1.63g,soluble starch 5.0 g,NaNO3 1.6 g,MgSO4 2.3 g in 1L),the largest bacterial dry weight(7.36 g L-1) was obtained,which was an enhancement of 107% compared to the initial medium;and the algal lysis rate was as high as 98.4% which increased nearly 10% after optimization.

5-ASA in ulcerative colitis:Improving treatment compliance

5-aminosalicylic acid(5-ASA)compounds are a highly effective treatment for ulcerative colitis(UC).While UC patient compliance in clinical studies is over 90%, only 40%of patients in every day life take their prescribed therapy.Adherence to medication has been emphasized recently by a Cochrane meta-analysis that has suggested that future trials of 5-ASA in UC should look at patient compliance rather than drug efficacy. Better compliance can be obtained by reducing the number of tablets and times of administration.Given that the 5-ASA formulations have different delivery systems that split the active moiety in various regions of the intestine,it is particularly important that an adequate dose of the drug arrives at the inflamed part of the colon.5-ASA Multi matrix(MMx)is a novel,high strength(1.2 g),oral formulation designed for oncedaily dosing.It releases the active moiety throughout the colon.Different studies with this compound have shown that it is as effective as 5-ASA enema in the treatment of mild-to-moderate,left-sided UC,and is comparable to a pH-dependent,delayed release 5-ASA (Asacol ),even if given once daily.Recently,the effectiveness in the acute phase of UC has been confirmed also in maintenance.In conclusion,at present,5-ASA MMx seems theoretically the best agent for maintaining patient compliance,and consequently,treatment effectiveness.

The Challenges of Designing a Wooden Beam of Composed Section

This work describes details about the challenges and solutions encountered in the timber structure beam. The choice for wood is due to the fact that it is a better material suited for environments with high salinity and, in this context, to reduce maintenance costs. The entire roof was supported only by four columns, which forced the side and frontal beams to exceed spans over 18 meters without intermediate supports. This was the most important challenge of the project： to find a section to the beam which can attend the ultimate limit state and serviceability in wood to the dimensions in project. The answer was clear： It would need to have composed section. A computational model was constructed using the finite element method in order to obtain the efforts on the structural elements. It is important to emphasize that the design of a wood structure requires not only knowledge, but creativity as well, to overcome the challenges posed by the distinctive needs to the detailing of this material. In addition to that, it requires special attention during the construction execution, because of the difficulty that the carpenters have to read the specific plans.

Optimizing the Chemical Compositions of Protective Agents for Freeze-drying Bifidobacterium longum BIOMA 5920

Freeze drying has a deleterious effect on the viability of microorganisms. In front of this difficulty, the present study adopts response surface methodology to optimize the chemical compositions of protective agents to seek for maximum viability of Bifidobacterium longum BIOMA 5920 during freeze-drying. Through the compara- tive analysis of single protectant, the complex protective agents show better effect on the Bifidobacterium viability. Human-like collagen (HLC), trehalose and glycerol are confirmed as significant factors by Box-Behnken Design. The optimized formula for these three variables is tested as follows: HLC 1.23%, trehalose 11.50% and glycerol 4.65%. Under this formula, the viability is 88.23%, 39.67% higher in comparison to the control. The viable count is 1.07×10 9 cfu·g-1 , greatly exceeding the minimum viable count requirement (10 6 cfu·g-1 ).

Urban Regeneration Challenge： The Case of Avenidas Novas District in Lisbon

This paper aims at presenting the guidelines for an urban regeneration strategy in Lisbon, having in account the principles of urbanity, density, livability and social and territorial cohesion. The case study will be Avenidas Novas district, in Lisbon, Portugal, as it is a paradigmatic example of a central area which coexists with dynamism and decadence. The development model for Avenidas Novas was inspired on French boulevards and was planned to be the modem face of a medium to high social class population, as it was until 1940s. Today, as a consequence of further developments which corrupted the first principles and concept, its urban fabric is becoming less coherent and adequate to the needs of the population who works and lives there. From an analysis to the various components of the urban fabric, the paper will identify the major problems that are happening on the site, related to accessibility, mobility and functional diversity. Once understanding the impacts of an unsustainable territory management and urban design, the goal is to develop the principles for a creative urban regeneration strategy for Avenidas Novas district. The study will be based on the theoretical issues of the compact city and walkable distances in order to develop quantifying parameters of urban quality and to promote human scale public spaces and territorial cohesion on an urban environment.

Strong self-flushing technique for heat exchanger of sewage source heat pump system

To better remove the contamination on the surface of a heat-exchanger in urban sewage source heat pump system （USSHPS）, this paper analyzes the feasibility of strong self-flushing on the basis of experiments and presents a new on-line self-flushing technique, which alternately flushes part of heat transfer tubes. In addition, operation principles and the structure of the new heat-exchanger are introduced and the feasible economi- cal and technological cleaning plans are given by design calculation and scheme comparison. The result shows that keeping each tube washed for one minute with 5 m/s, the operating cost is lower than ￥5 and when one flushing pump ahemately flushes 10-20 heat exchangers, the saved costs of flushing 10 tubes alternately are over 4 times of the increased costs.

Analysis of the tea packaging design psychologies

The tea packing design occupies the important position in the field of the graphic design. A successful tea packing design can affect the consumers＇ desire to buy. In this article, from the tea packaging colors, forms, shapes and so on, the author discusses the vision, touch, taste and other sensory stimulation, and analyzes the relationship between the constituent elements including the emotional factors and the psychological needs of the consumers, as well as the packaging design.

Analysis of telescopic beam structure using couple of DOF technique and its application

Couple of DOF technique in FEM and the algorithm for equation group solution in the whole stiffness matrix is studied in this paper. A new procedure is developed for the analysis of telescope beam structure. This method can solve most of the complex structural problems in engineering practice. This method has been used in the FEM analysis of pile frame of muhifunetion drilling machine, which is designed and manufactured by our research group. The right analysis result can improves the design efficiency and the reliability of the structure and reduce the design cost.

Design and synthesis of porous non-noble metal oxides for catalytic removal of VOCs

The design and synthesis of highly active non-noble metal oxide catalysts, such as transition- and rare-earth-metal oxides, have attracted significant attention because of their high efficiency and low cost and the resultant potential applications for the degradation of volatile organic compounds(VOCs). The structure-activity relationships have been well-studied and used to facilitate design of the structure and composition of highly active catalysts. Recently, non-noble metal oxides with porous structures have been used as catalysts for deep oxidation of VOCs, such as aromatic hydrocarbons, aliphatic compounds, aldehydes, and alcohols, with comparable activities to their noble metal counterparts. This review summarizes the growing literature regarding the use of porous metal oxides for the catalytic removal of VOCs, with emphasis on design of the composition and structure and typical synthetic technologies.

Surface hydrogen bond network spatially confined BiOCl oxygen vacancy for photocatalysis

Rational engineering of oxygen vacancy(VO) at atomic precision is the key to comprehensively understanding the oxygen chemistry of oxide materials for catalytic oxidations. Here, we demonstrate that VO can be spatially confined on the surface through a sophisticated surface hydrogen bond(HB) network.The HB network is constructed between a hydroxyl-rich Bi OCl surface and polyprotic phosphoric acid,which remarkably decreases the formation energy of surface VO by selectively weakening the metal–oxygen bonds in a short range. Thus, surface-confined VO enables us to unambiguously distinguish the intrafacial and suprafacial oxygen species associated with NO oxidation in two classical catalytic systems.Unlike randomly distributed bulk VO that benefits the thermocatalytic NO oxidation and lattice O diffusion by the dominant intrafacial mechanism, surface VOis demonstrated to favor the photocatalytic NO oxidation through a suprafacial scheme by energetically activating surface O2, which should be attributed to the spatial confinement nature of surface VO.

Contact and injection engineering for low SS reconfigurable FETs and high gain complementary inverters

The newly emerged two-dimensional(2D) semiconducting materials, owning to the atomic thick nature and excellent optical and electrical properties, are considered as potential candidates to solve the bottlenecks of traditional semiconductors. However, the realization of high performance 2D semiconductorbased field-effect transistors(FETs) has been a longstanding challenge in 2D electronics, which is mainly ascribing to the presence of significant Schottky barrier(SB) at metal-semiconductor interfaces. Here, an additional contact gate is induced in 2D ambipolar FET to realize near ideal reconfigurable FET(RFET)devices without restrictions of SB. Benefitting from the consistently high doping of contact region, the effective SB height can be maintained at ultra-small value during all operation conditions, resulting in the near ideal subthreshold swing(SS) values(132 mV/decade for MoTe2 RFET and 67 mV/decade for WSe2 RFET) and the relatively high mobility(28.6 cm2/(Vs) for MoTe2 RFET and 89.8 cm2/(V s) for WSe2 RFET). Moreover, the flexible control on the doping polarity of contact region enables the remodeling and switching of the achieved unipolar FETs between p-type mode and n-type mode. Based on such reconfigurable behaviors, high gain complementary MoTe2 inverters are further realized. The findings in this work push forward the development of high-performance 2D semiconductor integrated devices and circuits.

Navigation signal structure based on complex carrier modulation

Signal structure design is an important part of satellite navigation system research,which directly affects navigation performance.Signal performance parameters are analyzed and performances of BPSK modulated signals and BOC modulated signals are compared.Aiming at requirements of high navigation precision and high anti-jamming ability,a new navigation signal structure based on complex carrier modulation is proposed and performances of the signal are researched with different parameters.A synchronization algorithm is put forward according to the signal characteristics,and the synchronization performance is qualitatively analyzed.Next,the applications of the complex carrier modulated signal are discussed,which include anti-jamming,navigation enhancement,power combing and so on.Simulations and analysis show that the proposed navigation signal structure based on complex carrier modulation has good navigation capabilities and anti-jamming abilities,which deserves further study.

An improved ground motion intensity measure for super high-rise buildings

Ground motion intensity measure (IM) is an important part in performance-based seismic design. A reasonable and efficient IM can make the prediction of the structural seismic responses more accurate. Therefore, a more reasonable IM for super high-rise buildings is proposed in this paper. This IM takes into account the significant characteristic that higher-order vibration modes play important roles in the seismic response of super high-rise buildings, as well as the advantages of some existing IMs. The key parameter of the proposed IM is calibrated using a series of time-history analyses. The collapse simulations of two super high-rise buildings are used to discuss the suitability of the proposed IM and some other existing IMs. The results indicate that the proposed IM yields a smaller coefficient of variation for the critical collapse status than other existing IMs and performs well in reflecting the contribution of higher-order vibration modes to the structural response. Hence, the proposed IM is more applicable to seismic design for super high-rise buildings than other IMs.