The Canny edge detector inevitably misses some important and obvious edges during contour extraction, which causes gaps in the contour. A geometric method to locate, measure and fill the gaps precisely is proposed. Wi...The Canny edge detector inevitably misses some important and obvious edges during contour extraction, which causes gaps in the contour. A geometric method to locate, measure and fill the gaps precisely is proposed. With the complete contour information, a convolution approach is presented, which utilizes an appropriate linear interpolation to resample the contour to calculate pointwise curvature. This approach distributes discrete points within a convolution window uniformly. It ensures a one-to-one correspondence between every point and its weight, thus the accuracy is guaranteed under this condition. A related parameter selection is also suggested. Experimental results show that the proposed methods are robust and accurate.展开更多
In this paper, a computer visualization approach is proposed for electromagnetic wave interaction with structures by mains of finite difference-time doain method (F-D) and computer graphics. By visualization of FDTD, ...In this paper, a computer visualization approach is proposed for electromagnetic wave interaction with structures by mains of finite difference-time doain method (F-D) and computer graphics. By visualization of FDTD, Phenomena such as wave propagation, penetration through structures, renection and absorption by structures are observed. Visualization of electromagnetic wave interactions with two wing-shaped structures is demonstrated. These examples indicate that the approach describe in the paper offers an effective way for investigating electromagnetic wave phenomena and is helpful to the engineers in controlling radar signature of the targets.展开更多
The influence of oxygen supply mode on the KIVCET (a Russian acronym for flash?cyclone?oxygen?electric?smelting) process was investigated using numerical simulation. The mass rate ratio (MRR) of central oxygen to late...The influence of oxygen supply mode on the KIVCET (a Russian acronym for flash?cyclone?oxygen?electric?smelting) process was investigated using numerical simulation. The mass rate ratio (MRR) of central oxygen to lateral oxygen of the central jet distributor (CJD) burner was defined to express the oxygen supply mode, and the KIVCET process with an MRR ranging from 0.09 to 0.39 was simulated. The results show that there are four efficient reaction regions that correspond to four CJD burners. A higher central oxygen flow improves the mixing between particles and oxygen, thus enhancing reactions and shortening the reaction regions. However, a higher dust rate is induced due to the spread of the particle columns. The optimal MRR for a KIVCET furnace with a smelting capacity of 50000 kg/h is suggested to be 0.31. In this case, the chemical reactions associated with the feed are completed with an acceptable dust rate.展开更多
In order to reveal the influence of forced ventilation on the dispersion of droplets ejected from roadheader-mounted external sprayer,the paper studies the air-flowing field and the droplet distribution under the cond...In order to reveal the influence of forced ventilation on the dispersion of droplets ejected from roadheader-mounted external sprayer,the paper studies the air-flowing field and the droplet distribution under the condition of gentle breeze and normal forced ventilation in heading face using the particle tracking technology of computational fluid dynamics(CFD).The results show that air-flowing tendency in the same section presents great comparability in the period of gentle breeze and forced ventilation,and the difference mainly embodies in the different wind velocity.The influence of ventilation on the dispersion of droplets is faint under the gentle breeze condition.The droplet can be evenly distributed around the cutting head.However,under the normal forced ventilation,a large number of droplets will drift to the return air side.At the same time,droplet clusters are predominantly presented in the lower part of windward side and the middle of the leeward side around the cutting head.In contrast,the droplet concentration in other parts around cutting head decreases a lot and the droplets are unable to form close-grained mist curtain.So the dust escape channel is formed.In addition,the simulation results also reveal that the disturbance of air flow on the droplet distribution can be effectively relieved when using ventilation duct with Coanda effect(VDCE).Field experiment results show that the dust suppression efficiency of total dust and respirable dust increases respectively by 10.5%and 9.3%when using VDCE,which proves that it can weaken the influence of airflow on droplet dispersion.展开更多
文摘The Canny edge detector inevitably misses some important and obvious edges during contour extraction, which causes gaps in the contour. A geometric method to locate, measure and fill the gaps precisely is proposed. With the complete contour information, a convolution approach is presented, which utilizes an appropriate linear interpolation to resample the contour to calculate pointwise curvature. This approach distributes discrete points within a convolution window uniformly. It ensures a one-to-one correspondence between every point and its weight, thus the accuracy is guaranteed under this condition. A related parameter selection is also suggested. Experimental results show that the proposed methods are robust and accurate.
文摘In this paper, a computer visualization approach is proposed for electromagnetic wave interaction with structures by mains of finite difference-time doain method (F-D) and computer graphics. By visualization of FDTD, Phenomena such as wave propagation, penetration through structures, renection and absorption by structures are observed. Visualization of electromagnetic wave interactions with two wing-shaped structures is demonstrated. These examples indicate that the approach describe in the paper offers an effective way for investigating electromagnetic wave phenomena and is helpful to the engineers in controlling radar signature of the targets.
基金Project(61621062)supported by the Foundation for Innovative Research Groups of the National Natural Science Foundation of China
文摘The influence of oxygen supply mode on the KIVCET (a Russian acronym for flash?cyclone?oxygen?electric?smelting) process was investigated using numerical simulation. The mass rate ratio (MRR) of central oxygen to lateral oxygen of the central jet distributor (CJD) burner was defined to express the oxygen supply mode, and the KIVCET process with an MRR ranging from 0.09 to 0.39 was simulated. The results show that there are four efficient reaction regions that correspond to four CJD burners. A higher central oxygen flow improves the mixing between particles and oxygen, thus enhancing reactions and shortening the reaction regions. However, a higher dust rate is induced due to the spread of the particle columns. The optimal MRR for a KIVCET furnace with a smelting capacity of 50000 kg/h is suggested to be 0.31. In this case, the chemical reactions associated with the feed are completed with an acceptable dust rate.
基金supported by the Program for Postgraduates Research Innovation in University of Jiangsu Province of China (No.CXLX13_955)the National Natural Science Foundation of China (No.51104153)
文摘In order to reveal the influence of forced ventilation on the dispersion of droplets ejected from roadheader-mounted external sprayer,the paper studies the air-flowing field and the droplet distribution under the condition of gentle breeze and normal forced ventilation in heading face using the particle tracking technology of computational fluid dynamics(CFD).The results show that air-flowing tendency in the same section presents great comparability in the period of gentle breeze and forced ventilation,and the difference mainly embodies in the different wind velocity.The influence of ventilation on the dispersion of droplets is faint under the gentle breeze condition.The droplet can be evenly distributed around the cutting head.However,under the normal forced ventilation,a large number of droplets will drift to the return air side.At the same time,droplet clusters are predominantly presented in the lower part of windward side and the middle of the leeward side around the cutting head.In contrast,the droplet concentration in other parts around cutting head decreases a lot and the droplets are unable to form close-grained mist curtain.So the dust escape channel is formed.In addition,the simulation results also reveal that the disturbance of air flow on the droplet distribution can be effectively relieved when using ventilation duct with Coanda effect(VDCE).Field experiment results show that the dust suppression efficiency of total dust and respirable dust increases respectively by 10.5%and 9.3%when using VDCE,which proves that it can weaken the influence of airflow on droplet dispersion.
